From 22d41b37e06cdc8ea4ed2f62c72f1a3dd5edb82c Mon Sep 17 00:00:00 2001 From: Andrew Cagney Date: Sun, 1 Aug 2004 14:37:02 +0000 Subject: [PATCH] 2004-08-01 Andrew Cagney * config/ia64/tm-linux.h (IA64_GNULINUX_TARGET): Delete. * config/alpha/nm-osf2.h (PROCFS_SIGPEND_OFFSET): Delete. * config/nm-gnu.h (NO_CORE_OPS): Delete. * config/pa/nm-hppah.h (MAY_SWITCH_FROM_INFERIOR_PID): Delete. * config/i386/nm-i386v4.h (LOSING_POLL): Delete. * config/alpha/nm-osf2.h (LOSING_POLL): Delete. * config/tm-nto.h (RAW_SIGNAL_LO, RAW_SIGNAL_HI): Delete. * config/m68k/tm-vx68.h (VX_SIZE_FPREGS): Delete. * config/nm-linux.h (USE_THREAD_STEP_NEEDED): Delete. * config/pa/nm-hppah.h (USE_THREAD_STEP_NEEDED): Delete. * config/tm-nto.h (TARGET_SIGNAL_RAW_TABLE) Delete. (TARGET_SIGNAL_RAW_VALUES): Delete. * config/pa/nm-hppah.h (TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT): Delete. * config/frv/tm-frv.h (TARGET_HW_BREAK_LIMIT) (TARGET_HW_WATCH_LIMIT): Delete. * Makefile.in (minimon_h, HFILES_NO_SRCDIR): Remove minimon.h. * minimon.h: Delete file. --- gdb/ChangeLog | 19 ++ gdb/config/alpha/nm-osf2.h | 8 - gdb/config/frv/tm-frv.h | 3 - gdb/config/i386/nm-i386v4.h | 3 - gdb/config/ia64/tm-linux.h | 2 - gdb/config/m68k/tm-vx68.h | 5 - gdb/config/nm-gnu.h | 1 - gdb/config/nm-linux.h | 4 - gdb/config/pa/nm-hppah.h | 29 --- gdb/config/tm-nto.h | 26 -- gdb/minimon.h | 601 -------------------------------------------- 11 files changed, 19 insertions(+), 682 deletions(-) delete mode 100644 gdb/minimon.h diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 6126452..6c8d176 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,24 @@ 2004-08-01 Andrew Cagney + * config/ia64/tm-linux.h (IA64_GNULINUX_TARGET): Delete. + * config/alpha/nm-osf2.h (PROCFS_SIGPEND_OFFSET): Delete. + * config/nm-gnu.h (NO_CORE_OPS): Delete. + * config/pa/nm-hppah.h (MAY_SWITCH_FROM_INFERIOR_PID): Delete. + * config/i386/nm-i386v4.h (LOSING_POLL): Delete. + * config/alpha/nm-osf2.h (LOSING_POLL): Delete. + * config/tm-nto.h (RAW_SIGNAL_LO, RAW_SIGNAL_HI): Delete. + * config/m68k/tm-vx68.h (VX_SIZE_FPREGS): Delete. + * config/nm-linux.h (USE_THREAD_STEP_NEEDED): Delete. + * config/pa/nm-hppah.h (USE_THREAD_STEP_NEEDED): Delete. + * config/tm-nto.h (TARGET_SIGNAL_RAW_TABLE) Delete. + (TARGET_SIGNAL_RAW_VALUES): Delete. + * config/pa/nm-hppah.h (TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT): + Delete. + * config/frv/tm-frv.h (TARGET_HW_BREAK_LIMIT) + (TARGET_HW_WATCH_LIMIT): Delete. + * Makefile.in (minimon_h, HFILES_NO_SRCDIR): Remove minimon.h. + * minimon.h: Delete file. + * trad-frame.c (trad_frame_get_this_base) (trad_frame_set_this_base, trad_frame_set_reg_realreg): New functions. diff --git a/gdb/config/alpha/nm-osf2.h b/gdb/config/alpha/nm-osf2.h index 1f3932d..cbd232c 100644 --- a/gdb/config/alpha/nm-osf2.h +++ b/gdb/config/alpha/nm-osf2.h @@ -35,7 +35,6 @@ #define PROCFS_DONT_TRACE_FAULTS /* Work around some peculiarities in the OSF/1 procfs implementation. */ -#define PROCFS_SIGPEND_OFFSET #define PROCFS_NEED_PIOCSSIG_FOR_KILL #define PROCFS_DONT_PIOCSSIG_CURSIG @@ -43,10 +42,3 @@ #define KERNEL_U_SIZE kernel_u_size() extern int kernel_u_size (void); - -/* poll() doesn't seem to work properly for /proc in this version of the OS. - If we only specify POLLPRI, things hang. It seems to get better when we set - POLLOUT, but that always returns POLLNVAL!!! Also, POLLOUT causes problems - on other OSes. */ - -#define LOSING_POLL diff --git a/gdb/config/frv/tm-frv.h b/gdb/config/frv/tm-frv.h index 1215c58..3d032d3 100644 --- a/gdb/config/frv/tm-frv.h +++ b/gdb/config/frv/tm-frv.h @@ -20,9 +20,6 @@ /* This target uses an architecture vector for most architecture methods. */ -#define TARGET_HW_BREAK_LIMIT 4 -#define TARGET_HW_WATCH_LIMIT 4 - #define TARGET_HAS_HARDWARE_WATCHPOINTS #define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ diff --git a/gdb/config/i386/nm-i386v4.h b/gdb/config/i386/nm-i386v4.h index ac87cbc..821be55 100644 --- a/gdb/config/i386/nm-i386v4.h +++ b/gdb/config/i386/nm-i386v4.h @@ -22,9 +22,6 @@ #include "config/nm-sysv4.h" -/* Poll causes GDB to hang, at least under Unixware 1.1.2. */ -#define LOSING_POLL - /* This is the amount to subtract from u.u_ar0 to get the offset in the core file of the register values. */ #define KERNEL_U_ADDR 0xe0000000 diff --git a/gdb/config/ia64/tm-linux.h b/gdb/config/ia64/tm-linux.h index f040f94..e55acff 100644 --- a/gdb/config/ia64/tm-linux.h +++ b/gdb/config/ia64/tm-linux.h @@ -22,8 +22,6 @@ #ifndef TM_LINUX_H #define TM_LINUX_H -#define IA64_GNULINUX_TARGET - #include "ia64/tm-ia64.h" #include "config/tm-linux.h" diff --git a/gdb/config/m68k/tm-vx68.h b/gdb/config/m68k/tm-vx68.h index 6eaf418..ab00246 100644 --- a/gdb/config/m68k/tm-vx68.h +++ b/gdb/config/m68k/tm-vx68.h @@ -71,8 +71,3 @@ This routine returns true on success */ #define GET_LONGJMP_TARGET(ADDR) m68k_get_longjmp_target(ADDR) - -/* Number of registers in a ptrace_getfpregs call. */ - -#define VX_SIZE_FPREGS (8 * DEPRECATED_REGISTER_RAW_SIZE (FP0_REGNUM) \ - + (3 * DEPRECATED_REGISTER_SIZE)) diff --git a/gdb/config/nm-gnu.h b/gdb/config/nm-gnu.h index 73a4180..ea6308a 100644 --- a/gdb/config/nm-gnu.h +++ b/gdb/config/nm-gnu.h @@ -38,6 +38,5 @@ extern char *gnu_target_pid_to_str (int pid); /* Use SVR4 style shared library support */ #define SVR4_SHARED_LIBS #include "solib.h" -#define NO_CORE_OPS #endif /* __NM_GNU_H__ */ diff --git a/gdb/config/nm-linux.h b/gdb/config/nm-linux.h index 0817c0a..c935524 100644 --- a/gdb/config/nm-linux.h +++ b/gdb/config/nm-linux.h @@ -54,10 +54,6 @@ extern void lin_lwp_attach_lwp (ptid_t ptid, int verbose); extern void lin_thread_get_thread_signals (sigset_t *mask); #define GET_THREAD_SIGNALS(mask) lin_thread_get_thread_signals (mask) -/* Defined to make stepping-over-breakpoints be thread-atomic. */ -#define USE_THREAD_STEP_NEEDED 1 - - /* Use elf_gregset_t and elf_fpregset_t, rather than gregset_t and fpregset_t. */ diff --git a/gdb/config/pa/nm-hppah.h b/gdb/config/pa/nm-hppah.h index 3b0b30d..91a71a4 100644 --- a/gdb/config/pa/nm-hppah.h +++ b/gdb/config/pa/nm-hppah.h @@ -117,31 +117,6 @@ extern int hppa_can_use_hw_watchpoint (int type, int cnt, int ot); #define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \ (1) -/* However, some addresses may not be profitable to use hardware to watch, - or may be difficult to understand when the addressed object is out of - scope, and hence should be unwatched. On some targets, this may have - severe performance penalties, such that we might as well use regular - watchpoints, and save (possibly precious) hardware watchpoints for other - locations. - - On HP-UX, we choose not to watch stack-based addresses, because - - [1] Our implementation relies on page protection traps. The granularity - of these is large and so can generate many false hits, which are expensive - to respond to. - - [2] Watches of "*p" where we may not know the symbol that p points to, - make it difficult to know when the addressed object is out of scope, and - hence shouldn't be watched. Page protection that isn't removed when the - addressed object is out of scope will either degrade execution speed - (false hits) or give false triggers (when the address is recycled by - other calls). - - Since either of these points results in a slow-running inferior, we might - as well use normal watchpoints, aka single-step & test. */ -#define TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT(pid,start,len) \ - hppa_range_profitable_for_hw_watchpoint(pid, start, (LONGEST)(len)) - /* On HP-UX, we're using page-protection to implement hardware watchpoints. When an instruction attempts to write to a write-protected memory page, a SIGBUS is raised. At that point, the write has not actually occurred. @@ -249,10 +224,6 @@ extern int hppa_resume_execd_vforking_child_to_get_parent_vfork (void); #define HPUXHPPA -#define MAY_SWITCH_FROM_INFERIOR_PID (1) - #define MAY_FOLLOW_EXEC (1) -#define USE_THREAD_STEP_NEEDED (1) - #include "infttrace.h" /* For parent_attach_all. */ diff --git a/gdb/config/tm-nto.h b/gdb/config/tm-nto.h index 359ff06..98494a9 100644 --- a/gdb/config/tm-nto.h +++ b/gdb/config/tm-nto.h @@ -32,30 +32,4 @@ #define REALTIME_LO 41 #define REALTIME_HI 56 -/* Set up the undefined useable signals. */ -#define RAW_SIGNAL_LO 32 -#define RAW_SIGNAL_HI (REALTIME_LO - 1) - -#define TARGET_SIGNAL_RAW_VALUES \ -TARGET_SIGNAL_RAW0, \ -TARGET_SIGNAL_RAW1, \ -TARGET_SIGNAL_RAW2, \ -TARGET_SIGNAL_RAW3, \ -TARGET_SIGNAL_RAW4, \ -TARGET_SIGNAL_RAW5, \ -TARGET_SIGNAL_RAW6, \ -TARGET_SIGNAL_RAW7, \ -TARGET_SIGNAL_RAW8 - -#define TARGET_SIGNAL_RAW_TABLE \ -{"SIGNAL32", "Signal 32"}, \ -{"SIGNAL33", "Signal 33"}, \ -{"SIGNAL34", "Signal 34"}, \ -{"SIGNAL35", "Signal 35"}, \ -{"SIGNAL36", "Signal 36"}, \ -{"SIGNAL37", "Signal 37"}, \ -{"SIGNAL38", "Signal 38"}, \ -{"SIGNAL39", "Signal 39"}, \ -{"SIGNAL40", "Signal 40"} - #endif /* _TM_QNXNTO_H */ diff --git a/gdb/minimon.h b/gdb/minimon.h deleted file mode 100644 index 94fd774..0000000 --- a/gdb/minimon.h +++ /dev/null @@ -1,601 +0,0 @@ -/* Definitions and macros for support of AMD's remote debugger, MiniMON. - Copyright 1990, 1991 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* - * Some basic types. FIXME, this should be done by declaring bitfield - * sizes in the structs. We can't portably depend on a "long int" being - * 32 bits, etc. - */ -typedef long int INT32; /* 32 bit integer */ -typedef unsigned long int UINT32; /* 32 bit integer (unsigned) */ -typedef unsigned long int ADDR32; /* 32 bit address */ -typedef unsigned long int INST32; /* 32 bit instruction */ -typedef long int BOOLEAN; /* Boolean value (32 bit) */ -typedef unsigned char BYTE; /* byte (8 bit) */ -typedef short int INT16; /* 16 bit integer */ -typedef unsigned short int UINT16; /* 16 bit integer (unsigned) */ - -/****************************************************************************/ -/************************* Message Information ******************************/ -/****************************************************************************/ - -/* - * Error codes - */ - -/* General errors */ -#define EMUSAGE 1 /* Bad args / flags */ -#define EMFAIL 2 /* Unrecoverable error */ -#define EMBADADDR 3 /* Illegal address */ -#define EMBADREG 4 /* Illegal register */ -#define EMSYNTAX 5 /* Illegal command syntax */ -#define EMACCESS 6 /* Could not access memory */ -#define EMALLOC 7 /* Could not allocate memory */ -#define EMTARGET 8 /* Unknown target type */ -#define EMHINIT 9 /* Could not initialize host */ -#define EMCOMM 10 /* Could not open communication channel */ - -/* Message errors */ -#define EMBADMSG 11 /* Unknown message type */ -#define EMMSG2BIG 12 /* Message to large for buffer */ -#define EMNOSEND 13 /* Could not send message */ -#define EMNORECV 14 /* Could not receive message */ - -#define EMRESET 15 /* Could not RESET target */ -#define EMCONFIG 16 /* Could not get target CONFIG */ -#define EMSTATUS 17 /* Could not get target STATUS */ -#define EMREAD 18 /* Could not READ target memory */ -#define EMWRITE 19 /* Could not WRITE target memory */ -#define EMBKPTSET 20 /* Could not set breakpoint */ -#define EMBKPTRM 21 /* Could not remove breakpoint */ -#define EMBKPTSTAT 22 /* Could not get breakpoint status */ -#define EMBKPTNONE 23 /* All breakpoints in use */ -#define EMBKPTUSED 24 /* Breakpoints already in use */ -#define EMCOPY 25 /* Could not COPY target memory */ -#define EMFILL 26 /* Could not FILL target memory */ -#define EMINIT 27 /* Could not initialize target memory */ -#define EMGO 28 /* Could not start execution */ -#define EMSTEP 29 /* Could not single step */ -#define EMBREAK 30 /* Could not BREAK */ -#define EMHIF 31 /* Could not perform HIF service */ -#define EMCHANNEL0 32 /* Could not read CHANNEL0 */ -#define EMCHANNEL1 33 /* Could not write CHANNEL1 */ - -/* COFF file loader errors */ -#define EMOPEN 34 /* Could not open COFF file */ -#define EMHDR 35 /* Could not read COFF header */ -#define EMMAGIC 36 /* Bad magic number */ -#define EMAOUT 37 /* Could not read COFF a.out header */ -#define EMSCNHDR 38 /* Could not read COFF section header */ -#define EMSCN 39 /* Could not read COFF section */ -#define EMCLOSE 40 /* Could not close COFF file */ - -/* Log file errors */ -#define EMLOGOPEN 41 /* Could not open log file */ -#define EMLOGREAD 42 /* Could not read log file */ -#define EMLOGWRITE 43 /* Could not write to log file */ -#define EMLOGCLOSE 44 /* Could not close log file */ - -/* Command file errors */ -#define EMCMDOPEN 45 /* Could not open command file */ -#define EMCMDREAD 46 /* Could not read command file */ -#define EMCMDWRITE 47 /* Could not write to command file */ -#define EMCMDCLOSE 48 /* Could not close comand file */ - -#define EMTIMEOUT 49 /* Host timed out waiting for a message */ -#define EMCOMMTYPE 50 /* A '-t' flag must be specified */ -#define EMCOMMERR 51 /* Communication error */ -#define EMBAUD 52 /* Invalid baud rate specified */ -/* - * Memory Spaces - */ -#define LOCAL_REG 0 /* Local processor register */ -#define GLOBAL_REG 1 /* Global processor register */ -#define SPECIAL_REG 2 /* Special processor register */ -#define TLB_REG 3 /* Translation Lookaside Buffer */ -#define COPROC_REG 4 /* Coprocessor register */ -#define I_MEM 5 /* Instruction Memory */ -#define D_MEM 6 /* Data Memory */ -#define I_ROM 7 /* Instruction ROM */ -#define D_ROM 8 /* Data ROM */ -#define I_O 9 /* Input/Output */ -#define I_CACHE 10 /* Instruction Cache */ -#define D_CACHE 11 /* Data Cache */ - -/* To supress warnings for zero length array definitions */ -#define DUMMY 1 - -/* - ** Host to target definitions - */ - -#define RESET 0 -#define CONFIG_REQ 1 -#define STATUS_REQ 2 -#define READ_REQ 3 -#define WRITE_REQ 4 -#define BKPT_SET 5 -#define BKPT_RM 6 -#define BKPT_STAT 7 -#define COPY 8 -#define FILL 9 -#define INIT 10 -#define GO 11 -#define STEP 12 -#define BREAK 13 - -#define HIF_CALL_RTN 64 -#define CHANNEL0 65 -#define CHANNEL1_ACK 66 - - -/* - ** Target to host definitions - */ - -#define RESET_ACK 32 -#define CONFIG 33 -#define STATUS 34 -#define READ_ACK 35 -#define WRITE_ACK 36 -#define BKPT_SET_ACK 37 -#define BKPT_RM_ACK 38 -#define BKPT_STAT_ACK 39 -#define COPY_ACK 40 -#define FILL_ACK 41 -#define INIT_ACK 42 -#define HALT 43 - -#define ERROR 63 - -#define HIF_CALL 96 -#define CHANNEL0_ACK 97 -#define CHANNEL1 98 - - -/* A "generic" message */ -struct generic_msg_t - { - INT32 code; /* generic */ - INT32 length; - BYTE byte[DUMMY]; - }; - - -/* A "generic" message (with an INT32 array) */ -struct generic_int32_msg_t - { - INT32 code; /* generic */ - INT32 length; - INT32 int32[DUMMY]; - }; - - -/* - ** Host to target messages - */ - -struct reset_msg_t - { - INT32 code; /* 0 */ - INT32 length; - }; - - -struct config_req_msg_t - { - INT32 code; /* 1 */ - INT32 length; - }; - - -struct status_req_msg_t - { - INT32 code; /* 2 */ - INT32 length; - }; - - -struct read_req_msg_t - { - INT32 code; /* 3 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 byte_count; - }; - - -struct write_req_msg_t - { - INT32 code; /* 4 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 byte_count; - BYTE data[DUMMY]; - }; - - -struct write_r_msg_t - { - INT32 code; /* 4 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 byte_count; - INT32 data[DUMMY]; - }; - - -struct bkpt_set_msg_t - { - INT32 code; /* 5 */ - INT32 length; - INT32 memory_space; - ADDR32 bkpt_addr; - INT32 pass_count; - INT32 bkpt_type; - }; - - -struct bkpt_rm_msg_t - { - INT32 code; /* 6 */ - INT32 length; - INT32 memory_space; - ADDR32 bkpt_addr; - }; - - -struct bkpt_stat_msg_t - { - INT32 code; /* 7 */ - INT32 length; - INT32 memory_space; - ADDR32 bkpt_addr; - }; - - -struct copy_msg_t - { - INT32 code; /* 8 */ - INT32 length; - INT32 source_space; - ADDR32 source_addr; - INT32 dest_space; - ADDR32 dest_addr; - INT32 byte_count; - }; - - -struct fill_msg_t - { - INT32 code; /* 9 */ - INT32 length; - INT32 memory_space; - ADDR32 start_addr; - INT32 fill_count; - INT32 byte_count; - BYTE fill_data[DUMMY]; - }; - - -struct init_msg_t - { - INT32 code; /* 10 */ - INT32 length; - ADDR32 text_start; - ADDR32 text_end; - ADDR32 data_start; - ADDR32 data_end; - ADDR32 entry_point; - INT32 mem_stack_size; - INT32 reg_stack_size; - ADDR32 arg_start; - INT32 os_control; - }; - - -struct go_msg_t - { - INT32 code; /* 11 */ - INT32 length; - }; - - -struct step_msg_t - { - INT32 code; /* 12 */ - INT32 length; - INT32 count; - }; - - -struct break_msg_t - { - INT32 code; /* 13 */ - INT32 length; - }; - - -struct hif_call_rtn_msg_t - { - INT32 code; /* 64 */ - INT32 length; - INT32 service_number; - INT32 gr121; - INT32 gr96; - INT32 gr97; - }; - - -struct channel0_msg_t - { - INT32 code; /* 65 */ - INT32 length; - BYTE data; - }; - - -struct channel1_ack_msg_t - { - INT32 code; /* 66 */ - INT32 length; - }; - - -/* - ** Target to host messages - */ - - -struct reset_ack_msg_t - { - INT32 code; /* 32 */ - INT32 length; - }; - - -struct config_msg_t - { - INT32 code; /* 33 */ - INT32 length; - INT32 processor_id; - INT32 version; - ADDR32 I_mem_start; - INT32 I_mem_size; - ADDR32 D_mem_start; - INT32 D_mem_size; - ADDR32 ROM_start; - INT32 ROM_size; - INT32 max_msg_size; - INT32 max_bkpts; - INT32 coprocessor; - INT32 reserved; - }; - - -struct status_msg_t - { - INT32 code; /* 34 */ - INT32 length; - INT32 msgs_sent; - INT32 msgs_received; - INT32 errors; - INT32 bkpts_hit; - INT32 bkpts_free; - INT32 traps; - INT32 fills; - INT32 spills; - INT32 cycles; - INT32 reserved; - }; - - -struct read_ack_msg_t - { - INT32 code; /* 35 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 byte_count; - BYTE data[DUMMY]; - }; - -struct read_r_ack_msg_t - { - INT32 code; /* 35 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 byte_count; - INT32 data[DUMMY]; - }; - - -struct write_ack_msg_t - { - INT32 code; /* 36 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 byte_count; - }; - - -struct bkpt_set_ack_msg_t - { - INT32 code; /* 37 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 pass_count; - INT32 bkpt_type; - }; - - -struct bkpt_rm_ack_msg_t - { - INT32 code; /* 38 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - }; - - -struct bkpt_stat_ack_msg_t - { - INT32 code; /* 39 */ - INT32 length; - INT32 memory_space; - ADDR32 address; - INT32 pass_count; - INT32 bkpt_type; - }; - - -struct copy_ack_msg_t - { - INT32 code; /* 40 */ - INT32 length; - INT32 source_space; - ADDR32 source_addr; - INT32 dest_space; - ADDR32 dest_addr; - INT32 byte_count; - }; - - -struct fill_ack_msg_t - { - INT32 code; /* 41 */ - INT32 length; - INT32 memory_space; - ADDR32 start_addr; - INT32 fill_count; - INT32 byte_count; - }; - - -struct init_ack_msg_t - { - INT32 code; /* 42 */ - INT32 length; - }; - - -struct halt_msg_t - { - INT32 code; /* 43 */ - INT32 length; - INT32 memory_space; - ADDR32 pc0; - ADDR32 pc1; - INT32 trap_number; - }; - - -struct error_msg_t - { - INT32 code; /* 63 */ - INT32 length; - INT32 error_code; - INT32 memory_space; - ADDR32 address; - }; - - -struct hif_call_msg_t - { - INT32 code; /* 96 */ - INT32 length; - INT32 service_number; - INT32 lr2; - INT32 lr3; - INT32 lr4; - }; - - -struct channel0_ack_msg_t - { - INT32 code; /* 97 */ - INT32 length; - }; - - -struct channel1_msg_t - { - INT32 code; /* 98 */ - INT32 length; - BYTE data[DUMMY]; - }; - - - -/* - ** Union all of the message types together - */ - -union msg_t - { - struct generic_msg_t generic_msg; - struct generic_int32_msg_t generic_int32_msg; - - struct reset_msg_t reset_msg; - struct config_req_msg_t config_req_msg; - struct status_req_msg_t status_req_msg; - struct read_req_msg_t read_req_msg; - struct write_req_msg_t write_req_msg; - struct write_r_msg_t write_r_msg; - struct bkpt_set_msg_t bkpt_set_msg; - struct bkpt_rm_msg_t bkpt_rm_msg; - struct bkpt_stat_msg_t bkpt_stat_msg; - struct copy_msg_t copy_msg; - struct fill_msg_t fill_msg; - struct init_msg_t init_msg; - struct go_msg_t go_msg; - struct step_msg_t step_msg; - struct break_msg_t break_msg; - - struct hif_call_rtn_msg_t hif_call_rtn_msg; - struct channel0_msg_t channel0_msg; - struct channel1_ack_msg_t channel1_ack_msg; - - struct reset_ack_msg_t reset_ack_msg; - struct config_msg_t config_msg; - struct status_msg_t status_msg; - struct read_ack_msg_t read_ack_msg; - struct read_r_ack_msg_t read_r_ack_msg; - struct write_ack_msg_t write_ack_msg; - struct bkpt_set_ack_msg_t bkpt_set_ack_msg; - struct bkpt_rm_ack_msg_t bkpt_rm_ack_msg; - struct bkpt_stat_ack_msg_t bkpt_stat_ack_msg; - struct copy_ack_msg_t copy_ack_msg; - struct fill_ack_msg_t fill_ack_msg; - struct init_ack_msg_t init_ack_msg; - struct halt_msg_t halt_msg; - - struct error_msg_t error_msg; - - struct hif_call_msg_t hif_call_msg; - struct channel0_ack_msg_t channel0_ack_msg; - struct channel1_msg_t channel1_msg; - }; -- 2.7.4