From 220cad3cbf553f893432919b458da36489373fc6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 18 Nov 2010 09:32:58 +0800 Subject: [PATCH] drm/i915: Always set the DP transcoder config to 8BPC. The pipe is always set to 8BPC, but here we were leaving whatever previous bits were set by the BIOS in place. Signed-off-by: Eric Anholt Tested-by: Keith Packard Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 25ed911a311..878fc766a12 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3033,6 +3033,7 @@ #define TRANS_DP_10BPC (1<<9) #define TRANS_DP_6BPC (2<<9) #define TRANS_DP_12BPC (3<<9) +#define TRANS_DP_BPC_MASK (3<<9) #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) #define TRANS_DP_VSYNC_ACTIVE_LOW 0 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 255b52ee009..9d3af3cb5a0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2120,9 +2120,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); + TRANS_DP_SYNC_MASK | + TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); + temp |= TRANS_DP_8BPC; if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; -- 2.34.1