From 21ebddd3efd3aff961153f1bac4793218dfaea9c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 17 Oct 2007 20:35:37 +0200 Subject: [PATCH] x86: unify include/asm/debugreg_32/64.h Almost identical except for the extra DR_LEN_8 and the different DR_CONTROL_RESERVED defines. Signed-off-by: Thomas Gleixner Conflicts: include/asm-x86/Kbuild --- include/asm-x86/Kbuild | 2 -- include/asm-x86/debugreg.h | 79 +++++++++++++++++++++++++++++++++++++------ include/asm-x86/debugreg_32.h | 64 ----------------------------------- include/asm-x86/debugreg_64.h | 65 ----------------------------------- 4 files changed, 68 insertions(+), 142 deletions(-) delete mode 100644 include/asm-x86/debugreg_32.h delete mode 100644 include/asm-x86/debugreg_64.h diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild index 24bbde8..559830e 100644 --- a/include/asm-x86/Kbuild +++ b/include/asm-x86/Kbuild @@ -1,8 +1,6 @@ include include/asm-generic/Kbuild.asm header-y += boot.h -header-y += debugreg_32.h -header-y += debugreg_64.h header-y += debugreg.h header-y += ldt.h header-y += msr-index.h diff --git a/include/asm-x86/debugreg.h b/include/asm-x86/debugreg.h index b6ce7e4..c6344d5 100644 --- a/include/asm-x86/debugreg.h +++ b/include/asm-x86/debugreg.h @@ -1,13 +1,70 @@ -#ifdef __KERNEL__ -# ifdef CONFIG_X86_32 -# include "debugreg_32.h" -# else -# include "debugreg_64.h" -# endif +#ifndef _ASM_X86_DEBUGREG_H +#define _ASM_X86_DEBUGREG_H + + +/* Indicate the register numbers for a number of the specific + debug registers. Registers 0-3 contain the addresses we wish to trap on */ +#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */ +#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */ + +#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */ +#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */ + +/* Define a few things for the status register. We can use this to determine + which debugging register was responsible for the trap. The other bits + are either reserved or not of interest to us. */ + +#define DR_TRAP0 (0x1) /* db0 */ +#define DR_TRAP1 (0x2) /* db1 */ +#define DR_TRAP2 (0x4) /* db2 */ +#define DR_TRAP3 (0x8) /* db3 */ + +#define DR_STEP (0x4000) /* single-step */ +#define DR_SWITCH (0x8000) /* task switch */ + +/* Now define a bunch of things for manipulating the control register. + The top two bytes of the control register consist of 4 fields of 4 + bits - each field corresponds to one of the four debug registers, + and indicates what types of access we trap on, and how large the data + field is that we are looking at */ + +#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */ +#define DR_CONTROL_SIZE 4 /* 4 control bits per register */ + +#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */ +#define DR_RW_WRITE (0x1) +#define DR_RW_READ (0x3) + +#define DR_LEN_1 (0x0) /* Settings for data length to trap on */ +#define DR_LEN_2 (0x4) +#define DR_LEN_4 (0xC) +#define DR_LEN_8 (0x8) + +/* The low byte to the control register determine which registers are + enabled. There are 4 fields of two bits. One bit is "local", meaning + that the processor will reset the bit after a task switch and the other + is global meaning that we have to explicitly reset the bit. With linux, + you can use either one, since we explicitly zero the register when we enter + kernel mode. */ + +#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */ +#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */ +#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */ + +#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */ +#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */ + +/* The second byte to the control register has a few special things. + We can slow the instruction pipeline for instructions coming via the + gdt or the ldt if we want to. I am not sure why this is an advantage */ + +#ifdef __i386__ +#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */ #else -# ifdef __i386__ -# include "debugreg_32.h" -# else -# include "debugreg_64.h" -# endif +#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */ +#endif + +#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */ +#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */ + #endif diff --git a/include/asm-x86/debugreg_32.h b/include/asm-x86/debugreg_32.h deleted file mode 100644 index f0b2b06..0000000 --- a/include/asm-x86/debugreg_32.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef _I386_DEBUGREG_H -#define _I386_DEBUGREG_H - - -/* Indicate the register numbers for a number of the specific - debug registers. Registers 0-3 contain the addresses we wish to trap on */ -#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */ -#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */ - -#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */ -#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */ - -/* Define a few things for the status register. We can use this to determine - which debugging register was responsible for the trap. The other bits - are either reserved or not of interest to us. */ - -#define DR_TRAP0 (0x1) /* db0 */ -#define DR_TRAP1 (0x2) /* db1 */ -#define DR_TRAP2 (0x4) /* db2 */ -#define DR_TRAP3 (0x8) /* db3 */ - -#define DR_STEP (0x4000) /* single-step */ -#define DR_SWITCH (0x8000) /* task switch */ - -/* Now define a bunch of things for manipulating the control register. - The top two bytes of the control register consist of 4 fields of 4 - bits - each field corresponds to one of the four debug registers, - and indicates what types of access we trap on, and how large the data - field is that we are looking at */ - -#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */ -#define DR_CONTROL_SIZE 4 /* 4 control bits per register */ - -#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */ -#define DR_RW_WRITE (0x1) -#define DR_RW_READ (0x3) - -#define DR_LEN_1 (0x0) /* Settings for data length to trap on */ -#define DR_LEN_2 (0x4) -#define DR_LEN_4 (0xC) - -/* The low byte to the control register determine which registers are - enabled. There are 4 fields of two bits. One bit is "local", meaning - that the processor will reset the bit after a task switch and the other - is global meaning that we have to explicitly reset the bit. With linux, - you can use either one, since we explicitly zero the register when we enter - kernel mode. */ - -#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */ -#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */ -#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */ - -#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */ -#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */ - -/* The second byte to the control register has a few special things. - We can slow the instruction pipeline for instructions coming via the - gdt or the ldt if we want to. I am not sure why this is an advantage */ - -#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */ -#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */ -#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */ - -#endif diff --git a/include/asm-x86/debugreg_64.h b/include/asm-x86/debugreg_64.h deleted file mode 100644 index bd1aab1..0000000 --- a/include/asm-x86/debugreg_64.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef _X86_64_DEBUGREG_H -#define _X86_64_DEBUGREG_H - - -/* Indicate the register numbers for a number of the specific - debug registers. Registers 0-3 contain the addresses we wish to trap on */ -#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */ -#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */ - -#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */ -#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */ - -/* Define a few things for the status register. We can use this to determine - which debugging register was responsible for the trap. The other bits - are either reserved or not of interest to us. */ - -#define DR_TRAP0 (0x1) /* db0 */ -#define DR_TRAP1 (0x2) /* db1 */ -#define DR_TRAP2 (0x4) /* db2 */ -#define DR_TRAP3 (0x8) /* db3 */ - -#define DR_STEP (0x4000) /* single-step */ -#define DR_SWITCH (0x8000) /* task switch */ - -/* Now define a bunch of things for manipulating the control register. - The top two bytes of the control register consist of 4 fields of 4 - bits - each field corresponds to one of the four debug registers, - and indicates what types of access we trap on, and how large the data - field is that we are looking at */ - -#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */ -#define DR_CONTROL_SIZE 4 /* 4 control bits per register */ - -#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */ -#define DR_RW_WRITE (0x1) -#define DR_RW_READ (0x3) - -#define DR_LEN_1 (0x0) /* Settings for data length to trap on */ -#define DR_LEN_2 (0x4) -#define DR_LEN_4 (0xC) -#define DR_LEN_8 (0x8) - -/* The low byte to the control register determine which registers are - enabled. There are 4 fields of two bits. One bit is "local", meaning - that the processor will reset the bit after a task switch and the other - is global meaning that we have to explicitly reset the bit. With linux, - you can use either one, since we explicitly zero the register when we enter - kernel mode. */ - -#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */ -#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */ -#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */ - -#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */ -#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */ - -/* The second byte to the control register has a few special things. - We can slow the instruction pipeline for instructions coming via the - gdt or the ldt if we want to. I am not sure why this is an advantage */ - -#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */ -#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */ -#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */ - -#endif -- 2.7.4