From 208e1ae8d1668278fe46f13d8d7c0e40f7cdc6ec Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Tue, 17 Jan 2017 10:43:55 +0800 Subject: [PATCH] armv8: ls1012a: define esdhc_status_fixup for QDS board The LS1012AQDS board has a hardware issue. When there is no eMMC adapter card inserted in SDHC2 adapter slot, the command inhibit bits of eSDHC2_PRSSTAT register will never release. This would cause below continious error messages in linux since it uses polling mode to detect card. "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." This patch is to define esdhc_status_fixup function for QDS to disable SDHC2 status if no eMMC adapter card is detected. Signed-off-by: Yangbo Lu Reviewed-by: York Sun --- board/freescale/ls1012aqds/ls1012aqds.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index 94440b3..88fb4ce 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -121,6 +121,34 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } +int esdhc_status_fixup(void *blob, const char *compat) +{ + char esdhc0_path[] = "/soc/esdhc@1560000"; + char esdhc1_path[] = "/soc/esdhc@1580000"; + u8 card_id; + + do_fixup_by_path(blob, esdhc0_path, "status", "okay", + sizeof("okay"), 1); + + /* + * The Presence Detect 2 register detects the installation + * of cards in various PCI Express or SGMII slots. + * + * STAT_PRS2[7:5]: Specifies the type of card installed in the + * SDHC2 Adapter slot. 0b111 indicates no adapter is installed. + */ + card_id = (QIXIS_READ(present2) & 0xe0) >> 5; + + /* If no adapter is installed in SDHC2, disable SDHC2 */ + if (card_id == 0x7) + do_fixup_by_path(blob, esdhc1_path, "status", "disabled", + sizeof("disabled"), 1); + else + do_fixup_by_path(blob, esdhc1_path, "status", "okay", + sizeof("okay"), 1); + return 0; +} + #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { -- 2.7.4