From 2012579b31293d0a8cf2024e9dab66810bf1a15e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 9 Aug 2021 14:13:24 +0200 Subject: [PATCH] ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM, which causes additional signal delay. At 108 MHz, this delay triggers a sporadic issue where the first bit of RX data is not received by the QSPI controller. There are two options of addressing this problem, either by using the DLYB block to compensate the extra delay, or by reducing the QSPI bus clock frequency. The former requires calibration and that is overly complex, so opt for the second option. Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 2b0ac60..44ecc47 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -202,7 +202,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; - spi-max-frequency = <108000000>; + spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; }; -- 2.7.4