From 1f69dcfdaef84614b3ac7ac113d1b9a286afb9a0 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Tue, 2 Oct 2007 00:12:09 +1000 Subject: [PATCH] [POWERPC] 4xx: Add RGMII support for Sequoia 440EPx This adds RGMII support to Sequoia DTS and sets correct phy-mode for EMACs. According to Sequoia datasheet, both ethernet ports are connected to RGMII interface, while ZMII is used only for MDIO. Signed-off-by: Valentine Barshak Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/sequoia.dts | 14 ++++++++++++-- arch/powerpc/platforms/44x/Kconfig | 1 + 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 36be75b..8833dfe 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -241,6 +241,12 @@ reg = ; }; + RGMII0: emac-rgmii@ef601000 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii-440epx", "ibm,rgmii"; + reg = ; + }; + EMAC0: ethernet@ef600e00 { linux,network-index = <0>; device_type = "network"; @@ -261,10 +267,12 @@ max-frame-size = <5dc>; rx-fifo-size = <1000>; tx-fifo-size = <800>; - phy-mode = "rmii"; + phy-mode = "rgmii"; phy-map = <00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; }; EMAC1: ethernet@ef600f00 { @@ -287,10 +295,12 @@ max-frame-size = <5dc>; rx-fifo-size = <1000>; tx-fifo-size = <800>; - phy-mode = "rmii"; + phy-mode = "rgmii"; phy-map = <00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; }; }; }; diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 51f3ea4..49a4f09 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -50,6 +50,7 @@ config 440EPX select PPC_FPU # Disabled until the new EMAC Driver is merged. # select IBM_NEW_EMAC_EMAC4 +# select IBM_NEW_EMAC_RGMII # select IBM_NEW_EMAC_ZMII config 440GP -- 2.7.4