From 1dfbec3905548a0cbc820a62e1d8adee1c80bd41 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Tue, 1 Nov 2016 11:22:06 +0800 Subject: [PATCH] clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399 Usually, the 800MHz and 1GHz are supplied for CPLL and NPLL in the RK3399. But dues to the carelessly copying from RK3036 when the RK3399 bringing up, the refdiv == 6, it will increase the lock time, and it is not an optimal configuration. Let's fix them for the lock time and jitter are lower: 800 MHz: - FVCO == 2.4 GHz, revdiv == 1. 1 GHz: - FVCO == 3 GHz, revdiv == 1. Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index a5a3f41..28aff45 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -77,7 +77,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0), RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0), RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), - RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0), + RK3036_PLL_RATE(1000000000, 1, 125, 3, 1, 1, 0), RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0), RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0), RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0), @@ -87,7 +87,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0), RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0), RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0), - RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0), + RK3036_PLL_RATE( 800000000, 1, 100, 3, 1, 1, 0), RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0), RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0), RK3036_PLL_RATE( 676000000, 3, 169, 2, 1, 1, 0), -- 2.7.4