From 1dbf7f299f90dc4b45e2322a3af843ad65e1501b Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Thu, 17 Sep 2015 14:21:25 +0200
Subject: [PATCH] gpio: pl061: detail IRQ trigger handling

I couldn't follow this code flow. Make it dirt simple to figure
out what is going on and get proper debug prints. Warn if we
set up an IRQ without any trigger. Should make no semantic
difference.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-pl061.c | 55 ++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 47 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 229ef65..5b1461f 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -158,24 +158,63 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 	gpiois = readb(chip->base + GPIOIS);
 	gpioibe = readb(chip->base + GPIOIBE);
 
+	if ((trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) &&
+	    (trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)))
+	{
+		dev_err(gc->dev,
+			"trying to configure line %d for both level and edge "
+			"detection, choose one!\n",
+			offset);
+		return -EINVAL;
+	}
+
 	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH;
+
+		/* Disable edge detection */
+		gpioibe &= ~bit;
+		/* Enable level detection */
 		gpiois |= bit;
-		if (trigger & IRQ_TYPE_LEVEL_HIGH)
+		/* Select polarity */
+		if (polarity)
 			gpioiev |= bit;
 		else
 			gpioiev &= ~bit;
-	} else
-		gpiois &= ~bit;
 
-	if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
-		/* Setting this makes GPIOEV be ignored */
+		dev_dbg(gc->dev, "line %d: IRQ on %s level\n",
+			offset,
+			polarity ? "HIGH" : "LOW");
+	} else if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		/* Disable level detection */
+		gpiois &= ~bit;
+		/* Select both edges, setting this makes GPIOEV be ignored */
 		gpioibe |= bit;
-	else {
+
+		dev_dbg(gc->dev, "line %d: IRQ on both edges\n", offset);
+	} else if ((trigger & IRQ_TYPE_EDGE_RISING) ||
+		   (trigger & IRQ_TYPE_EDGE_FALLING)) {
+		bool rising = trigger & IRQ_TYPE_EDGE_RISING;
+
+		/* Disable level detection */
+		gpiois &= ~bit;
+		/* Clear detection on both edges */
 		gpioibe &= ~bit;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
+		/* Select edge */
+		if (rising)
 			gpioiev |= bit;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+		else
 			gpioiev &= ~bit;
+
+		dev_dbg(gc->dev, "line %d: IRQ on %s edge\n",
+			offset,
+			rising ? "RISING" : "FALLING");
+	} else {
+		/* No trigger: disable everything */
+		gpiois &= ~bit;
+		gpioibe &= ~bit;
+		gpioiev &= ~bit;
+		dev_warn(gc->dev, "no trigger selected for line %d\n",
+			 offset);
 	}
 
 	writeb(gpiois, chip->base + GPIOIS);
-- 
2.7.4