From 1c4e02746147cef8853142a7c71efcb2b9660aed Mon Sep 17 00:00:00 2001 From: =?utf8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 5 Sep 2014 21:52:42 +0300 Subject: [PATCH] drm/i915: Fix DVO 2x clock enable on 830M MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The spec says: "For the correct operation of the muxed DVO pins (GDEVSELB/ I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock Enable) must be set to “1” in both the DPLL A Control Register (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)." The pipe A and B force quirks take care of DPLL_VCO_ENABLE, so we just need a bit of special care to handle DPLL_DVO_2X_MODE. v2: Recompute num_dvo_pipes on the spot, use PIPE_A/PIPE_B instead of pipe/!pipe for the register offsets in disable (Daniel) Add a comment about the ordering in enable and another one about filtering out the DVO 2x bit in state readout Signed-off-by: Ville Syrjälä Tested-by: Thomas Richter (v1) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 53 +++++++++++++++++++++++++++++++++--- 1 file changed, 49 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 1386086..f4b8cb3 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1612,6 +1612,18 @@ static void chv_enable_pll(struct intel_crtc *crtc) mutex_unlock(&dev_priv->dpio_lock); } +static int intel_num_dvo_pipes(struct drm_device *dev) +{ + struct intel_crtc *crtc; + int count = 0; + + for_each_intel_crtc(dev, crtc) + count += crtc->active && + intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO); + + return count; +} + static void i9xx_enable_pll(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; @@ -1628,7 +1640,18 @@ static void i9xx_enable_pll(struct intel_crtc *crtc) if (IS_MOBILE(dev) && !IS_I830(dev)) assert_panel_unlocked(dev_priv, crtc->pipe); - I915_WRITE(reg, dpll); + /* Enable DVO 2x clock on both PLLs if necessary */ + if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) { + /* + * It appears to be important that we don't enable this + * for the current pipe before otherwise configuring the + * PLL. No idea how this should be handled if multiple + * DVO outputs are enabled simultaneosly. + */ + dpll |= DPLL_DVO_2X_MODE; + I915_WRITE(DPLL(!crtc->pipe), + I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE); + } /* Wait for the clocks to stabilize. */ POSTING_READ(reg); @@ -1667,8 +1690,22 @@ static void i9xx_enable_pll(struct intel_crtc *crtc) * * Note! This is for pre-ILK only. */ -static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +static void i9xx_disable_pll(struct intel_crtc *crtc) { + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum pipe pipe = crtc->pipe; + + /* Disable DVO 2x clock on both PLLs if necessary */ + if (IS_I830(dev) && + intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO) && + intel_num_dvo_pipes(dev) == 1) { + I915_WRITE(DPLL(PIPE_B), + I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE); + I915_WRITE(DPLL(PIPE_A), + I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE); + } + /* Don't disable pipe or pipe PLLs if needed */ if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) || (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)) @@ -4941,7 +4978,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) else if (IS_VALLEYVIEW(dev)) vlv_disable_pll(dev_priv, pipe); else - i9xx_disable_pll(dev_priv, pipe); + i9xx_disable_pll(intel_crtc); } if (!IS_GEN2(dev)) @@ -5945,7 +5982,7 @@ static void i8xx_update_pll(struct intel_crtc *crtc, dpll |= PLL_P2_DIVIDE_BY_4; } - if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO)) + if (!IS_I830(dev) && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO)) dpll |= DPLL_DVO_2X_MODE; if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) && @@ -6451,6 +6488,14 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, } pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe)); if (!IS_VALLEYVIEW(dev)) { + /* + * DPLL_DVO_2X_MODE must be enabled for both DPLLs + * on 830. Filter it out here so that we don't + * report errors due to that. + */ + if (IS_I830(dev)) + pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE; + pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe)); pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe)); } else { -- 2.7.4