From 1a7904fdfa7d1974410e9dc9b9bfe8aad7fb1311 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 12 Jan 2022 07:53:56 -0600 Subject: [PATCH] mmc: fsl_esdhc_imx: Use esdhc_soc_data flags to set host caps The Linux driver automatically can detect and enable UHS, HS200, HS400 and HS400_ES automatically without extra flags being placed into the device tree. Right now, for U-Boot to use UHS, HS200 or HS400, the extra flags are needed in the device tree. Instead, go through the esdhc_soc_data flags and enable the host caps where applicable to automatically enable higher speeds. Suggested-by: Fabio Estevam Signed-off-by: Adam Ford --- drivers/mmc/fsl_esdhc_imx.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 32b42c3..fcfbaa7 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -1224,8 +1224,29 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv, val |= ESDHC_TUNING_CMD_CRC_CHECK_DISABLE; esdhc_write32(®s->tuning_ctrl, val); } - } + /* + * UHS doesn't have explicit ESDHC flags, so if it's + * not supported, disable it in config. + */ + if (CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)) + cfg->host_caps |= UHS_CAPS; + + if (CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)) { + if (priv->flags & ESDHC_FLAG_HS200) + cfg->host_caps |= MMC_CAP(MMC_HS_200); + } + + if (CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)) { + if (priv->flags & ESDHC_FLAG_HS400) + cfg->host_caps |= MMC_CAP(MMC_HS_400); + } + + if (CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)) { + if (priv->flags & ESDHC_FLAG_HS400_ES) + cfg->host_caps |= MMC_CAP(MMC_HS_400_ES); + } + } return 0; } -- 2.7.4