From 1900e30d0ef74755213811cc23079b1be51298fe Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Mon, 9 May 2022 13:46:34 -0600 Subject: [PATCH] net: macb: simplify/cleanup NAPI reschedule checking Previously the macb_poll method was checking the RSR register after completing its RX receive work to see if additional packets had been received since IRQs were disabled, since this controller does not maintain the pending IRQ status across IRQ disable. It also had to double-check the register after re-enabling IRQs to detect if packets were received after the first check but before IRQs were enabled. Using the RSR register for this purpose is problematic since it reflects the global device state rather than the per-queue state, so if packets are being received on multiple queues it may end up retriggering receive on a queue where the packets did not actually arrive and not on the one where they did arrive. This will also cause problems with an upcoming change to use NAPI for the TX path where use of multiple queues is more likely. Add a macb_rx_pending function to check the RX ring to see if more packets have arrived in the queue, and use that to check if NAPI should be rescheduled rather than the RSR register. By doing this, we can just ignore the global RSR register entirely, and thus save some extra device register accesses at the same time. This also makes the previous first check for pending packets rather redundant, since it would be checking the RX ring state which was just checked in the receive work function. Therefore we can get rid of it and just check after enabling interrupts whether packets are already pending. Signed-off-by: Robert Hancock Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/cadence/macb_main.c | 65 +++++++++++++++----------------- 1 file changed, 31 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 6434e74..160dc5a 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -1554,54 +1554,51 @@ static int macb_rx(struct macb_queue *queue, struct napi_struct *napi, return received; } +static bool macb_rx_pending(struct macb_queue *queue) +{ + struct macb *bp = queue->bp; + unsigned int entry; + struct macb_dma_desc *desc; + + entry = macb_rx_ring_wrap(bp, queue->rx_tail); + desc = macb_rx_desc(queue, entry); + + /* Make hw descriptor updates visible to CPU */ + rmb(); + + return (desc->addr & MACB_BIT(RX_USED)) != 0; +} + static int macb_poll(struct napi_struct *napi, int budget) { struct macb_queue *queue = container_of(napi, struct macb_queue, napi); struct macb *bp = queue->bp; int work_done; - u32 status; - status = macb_readl(bp, RSR); - macb_writel(bp, RSR, status); + work_done = bp->macbgem_ops.mog_rx(queue, napi, budget); - netdev_vdbg(bp->dev, "poll: status = %08lx, budget = %d\n", - (unsigned long)status, budget); + netdev_vdbg(bp->dev, "poll: queue = %u, work_done = %d, budget = %d\n", + (unsigned int)(queue - bp->queues), work_done, budget); - work_done = bp->macbgem_ops.mog_rx(queue, napi, budget); - if (work_done < budget) { - napi_complete_done(napi, work_done); + if (work_done < budget && napi_complete_done(napi, work_done)) { + queue_writel(queue, IER, bp->rx_intr_mask); - /* RSR bits only seem to propagate to raise interrupts when - * interrupts are enabled at the time, so if bits are already - * set due to packets received while interrupts were disabled, + /* Packet completions only seem to propagate to raise + * interrupts when interrupts are enabled at the time, so if + * packets were received while interrupts were disabled, * they will not cause another interrupt to be generated when * interrupts are re-enabled. - * Check for this case here. This has been seen to happen - * around 30% of the time under heavy network load. + * Check for this case here to avoid losing a wakeup. This can + * potentially race with the interrupt handler doing the same + * actions if an interrupt is raised just after enabling them, + * but this should be harmless. */ - status = macb_readl(bp, RSR); - if (status) { + if (macb_rx_pending(queue)) { + queue_writel(queue, IDR, bp->rx_intr_mask); if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) queue_writel(queue, ISR, MACB_BIT(RCOMP)); - napi_reschedule(napi); - } else { - queue_writel(queue, IER, bp->rx_intr_mask); - - /* In rare cases, packets could have been received in - * the window between the check above and re-enabling - * interrupts. Therefore, a double-check is required - * to avoid losing a wakeup. This can potentially race - * with the interrupt handler doing the same actions - * if an interrupt is raised just after enabling them, - * but this should be harmless. - */ - status = macb_readl(bp, RSR); - if (unlikely(status)) { - queue_writel(queue, IDR, bp->rx_intr_mask); - if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) - queue_writel(queue, ISR, MACB_BIT(RCOMP)); - napi_schedule(napi); - } + netdev_vdbg(bp->dev, "poll: packets pending, reschedule\n"); + napi_schedule(napi); } } -- 2.7.4