From 18e8feae4a807994e4906d659116d249bfecd4c5 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Sun, 30 Jul 2023 09:41:11 +0200 Subject: [PATCH] net: dsa: qca8k: limit user ports access to the first CPU port on setup In preparation for multi-CPU support, set CPU port LOOKUP MEMBER outside the port loop and setup the LOOKUP MEMBER mask for user ports only to the first CPU port. This is to handle flooding condition where every CPU port is set as target and prevent packet duplication for unknown frames from user ports. Secondary CPU port LOOKUP MEMBER mask will be setup later when port_change_master will be implemented. Signed-off-by: Christian Marangi Reviewed-by: Simon Horman Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230730074113.21889-3-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/dsa/qca/qca8k-8xxx.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index dcef16c..acee5fe 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -1850,18 +1850,16 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; + /* CPU port gets connected to all user ports of the switch */ + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), + QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); + if (ret) + return ret; + /* Setup connection between CPU port & user ports * Configure specific switch configuration for ports */ for (i = 0; i < QCA8K_NUM_PORTS; i++) { - /* CPU port gets connected to all user ports of the switch */ - if (dsa_is_cpu_port(ds, i)) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); - if (ret) - return ret; - } - /* Individual user ports get connected to CPU port only */ if (dsa_is_user_port(ds, i)) { ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), -- 2.7.4