From 18d85d6e8ad766de9dd35c4d5c0d984233fb9b21 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Pali=20Roh=C3=A1r?= Date: Wed, 12 Jan 2022 18:20:47 +0100 Subject: [PATCH] arm: mvebu: Enable BootROM output on A38x MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit BootROMs on pre-A38x SoCs enabled its output on UART by default, but A38x' BootROM has its output on UART disabled by default. To enable BootROM output on A38x SoC, it is required to set DEBUG flag (which only enables BootROM output and nothing more) in kwbimage. For UART images this DEBUG flag is ignored by BootROM. Enable kwbimage DEBUG flag for all A38x boards. With this change BootROM prints the following (success) information on UART before booting U-Boot kwbimage: BootROM - 1.73 Booting from SPI flash Signed-off-by: Pali Rohár Reviewed-by: Marek Behún Reviewed-by: Stefan Roese --- arch/arm/mach-mvebu/Makefile | 7 +++++++ arch/arm/mach-mvebu/kwbimage.cfg.in | 3 +++ 2 files changed, 10 insertions(+) diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 799935c..a5a2087 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -70,6 +70,13 @@ KWB_REPLACE += SEC_FUSE_DUMP KWB_CFG_SEC_FUSE_DUMP = a38x endif +ifdef CONFIG_ARMADA_38X +# BootROM output is by default enabled on pre-A38x and disabled on A38x +# DEBUG flag on A38x for non-UART boot source only enable BootROM output and nothing more +KWB_REPLACE += DEBUG +KWB_CFG_DEBUG = 1 +endif + quiet_cmd_kwbcfg = KWBCFG $@ cmd_kwbcfg = sed -ne '$(foreach V,$(KWB_REPLACE),s/\#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \ <$< >$(dir $@)$(@F) diff --git a/arch/arm/mach-mvebu/kwbimage.cfg.in b/arch/arm/mach-mvebu/kwbimage.cfg.in index 603e886..ccb0997 100644 --- a/arch/arm/mach-mvebu/kwbimage.cfg.in +++ b/arch/arm/mach-mvebu/kwbimage.cfg.in @@ -11,5 +11,8 @@ VERSION 1 # Boot Media configurations #@BOOT_FROM +# Enable BootROM output via DEBUG flag on SoCs which require it +#@DEBUG + # Include U-Boot SPL with DDR3 training code into Binary Header BINARY spl/u-boot-spl.bin #@LOAD_ADDRESS -- 2.7.4