From 1876bb923c98c605eca69f0bfe295f7b5f5eba28 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 14 Jun 2009 06:45:50 -0300 Subject: [PATCH] V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge gspca_ov519: add support for the ov511 bridge Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 533 +++++++++++++++++++++++++++++++++++++- include/linux/videodev2.h | 1 + 2 files changed, 521 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 9d4b69d..1f8e261 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -76,8 +76,8 @@ struct sd { __u8 stopped; /* Streaming is temporarily paused */ - __u8 frame_rate; /* current Framerate (OV519 only) */ - __u8 clockdiv; /* clockdiv override for OV519 only */ + __u8 frame_rate; /* current Framerate */ + __u8 clockdiv; /* clockdiv override */ char sensor; /* Type of image sensor chip (SEN_*) */ #define SEN_UNKNOWN 0 @@ -304,17 +304,77 @@ static const struct v4l2_pix_format ov518_sif_mode[] = { .priv = 0}, }; +static const struct v4l2_pix_format ov511_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; +static const struct v4l2_pix_format ov511_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 40000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 40000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; /* Registers common to OV511 / OV518 */ +#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ #define R51x_SYS_RESET 0x50 + /* Reset type flags */ + #define OV511_RESET_OMNICE 0x08 #define R51x_SYS_INIT 0x53 #define R51x_SYS_SNAP 0x52 #define R51x_SYS_CUST_ID 0x5F #define R51x_COMP_LUT_BEGIN 0x80 /* OV511 Camera interface register numbers */ +#define R511_CAM_DELAY 0x10 +#define R511_CAM_EDGE 0x11 +#define R511_CAM_PXCNT 0x12 +#define R511_CAM_LNCNT 0x13 +#define R511_CAM_PXDIV 0x14 +#define R511_CAM_LNDIV 0x15 +#define R511_CAM_UV_EN 0x16 +#define R511_CAM_LINE_MODE 0x17 +#define R511_CAM_OPTS 0x18 + +#define R511_SNAP_FRAME 0x19 +#define R511_SNAP_PXCNT 0x1A +#define R511_SNAP_LNCNT 0x1B +#define R511_SNAP_PXDIV 0x1C +#define R511_SNAP_LNDIV 0x1D +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_OPTS 0x1F + +#define R511_DRAM_FLOW_CTL 0x20 +#define R511_FIFO_OPTS 0x31 +#define R511_I2C_CTL 0x40 #define R511_SYS_LED_CTL 0x55 /* OV511+ only */ -#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */ +#define R511_COMP_EN 0x78 +#define R511_COMP_LUT_EN 0x79 /* OV518 Camera interface register numbers */ #define R518_GPIO_OUT 0x56 /* OV518(+) only */ @@ -1079,13 +1139,128 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n) return ret; } +static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + int rc, retries; + + PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg); + + /* Three byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_3, reg); + if (rc < 0) + return rc; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(sd, R51x_I2C_DATA, value); + if (rc < 0) + return rc; + + /* Initiate 3-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x01); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + if (--retries < 0) { + PDEBUG(D_USBO, "i2c write retries exhausted"); + return -1; + } + } + + return 0; +} + +static int ov511_i2c_r(struct sd *sd, __u8 reg) +{ + int rc, value, retries; + + /* Two byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + reg_w(sd, R511_I2C_CTL, 0x10); + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c write retries exhausted"); + return -1; + } + } + + /* Two byte read cycle */ + for (retries = 6; ; ) { + /* Initiate 2-byte read cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = reg_w(sd, R511_I2C_CTL, 0x10); + if (rc < 0) + return rc; + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c read retries exhausted"); + return -1; + } + } + + value = reg_r(sd, R51x_I2C_DATA); + + PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value); + + /* This is needed to make i2c_w() work */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + return value; +} /* * The OV518 I2C I/O procedure is different, hence, this function. * This is normally only called from i2c_w(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_w(struct sd *sd, +static int ov518_i2c_w(struct sd *sd, __u8 reg, __u8 value) { @@ -1120,7 +1295,7 @@ static int i2c_w(struct sd *sd, * This is normally only called from i2c_r(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_r(struct sd *sd, __u8 reg) +static int ov518_i2c_r(struct sd *sd, __u8 reg) { int rc, value; @@ -1143,6 +1318,34 @@ static int i2c_r(struct sd *sd, __u8 reg) return value; } +static int i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_w(sd, reg, value); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_w(sd, reg, value); + } + return -1; /* Should never happen */ +} + +static int i2c_r(struct sd *sd, __u8 reg) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_r(sd, reg); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_r(sd, reg); + } + return -1; /* Should never happen */ +} + /* Writes bits at positions specified by mask to an I2C reg. Bits that are in * the same position as 1's in "mask" are cleared and set to "value". Bits * that are in the same position as 0's in "mask" are preserved, regardless @@ -1490,9 +1693,31 @@ static void ov51x_led_control(struct sd *sd, int on) } } -/* OV518 quantization tables are 8x4 (instead of 8x8) */ -static int ov518_upload_quan_tables(struct sd *sd) +static int ov51x_upload_quan_tables(struct sd *sd) { + const unsigned char yQuanTable511[] = { + 0, 1, 1, 2, 2, 3, 3, 4, + 1, 1, 1, 2, 2, 3, 4, 4, + 1, 1, 2, 2, 3, 4, 4, 4, + 2, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 5, 5, 5, + 3, 3, 4, 4, 5, 5, 5, 5, + 3, 4, 4, 4, 5, 5, 5, 5, + 4, 4, 4, 4, 5, 5, 5, 5 + }; + + const unsigned char uvQuanTable511[] = { + 0, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 2, 4, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 4, 4, 4, + 3, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4 + }; + + /* OV518 quantization tables are 8x4 (instead of 8x8) */ const unsigned char yQuanTable518[] = { 5, 4, 5, 6, 6, 7, 7, 7, 5, 5, 5, 5, 6, 7, 7, 7, @@ -1507,14 +1732,23 @@ static int ov518_upload_quan_tables(struct sd *sd) 7, 7, 7, 7, 7, 7, 8, 8 }; - const unsigned char *pYTable = yQuanTable518; - const unsigned char *pUVTable = uvQuanTable518; + const unsigned char *pYTable, *pUVTable; unsigned char val0, val1; - int i, rc, reg = R51x_COMP_LUT_BEGIN; + int i, size, rc, reg = R51x_COMP_LUT_BEGIN; PDEBUG(D_PROBE, "Uploading quantization tables"); - for (i = 0; i < 16; i++) { + if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) { + pYTable = yQuanTable511; + pUVTable = uvQuanTable511; + size = 32; + } else { + pYTable = yQuanTable518; + pUVTable = uvQuanTable518; + size = 16; + } + + for (i = 0; i < size; i++) { val0 = *pYTable++; val1 = *pYTable++; val0 &= 0x0f; @@ -1529,7 +1763,7 @@ static int ov518_upload_quan_tables(struct sd *sd) val0 &= 0x0f; val1 &= 0x0f; val0 |= val1 << 4; - rc = reg_w(sd, reg + 16, val0); + rc = reg_w(sd, reg + size, val0); if (rc < 0) return rc; @@ -1539,6 +1773,87 @@ static int ov518_upload_quan_tables(struct sd *sd) return 0; } +/* This initializes the OV511/OV511+ and the sensor */ +static int ov511_configure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int rc; + + /* For 511 and 511+ */ + const struct ov_regvals init_511[] = { + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3d }, + }; + + const struct ov_regvals norm_511[] = { + { R511_DRAM_FLOW_CTL, 0x01 }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0x1f }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals norm_511_p[] = { + { R511_DRAM_FLOW_CTL, 0xff }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0xff }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals compress_511[] = { + { 0x70, 0x1f }, + { 0x71, 0x05 }, + { 0x72, 0x06 }, + { 0x73, 0x06 }, + { 0x74, 0x14 }, + { 0x75, 0x03 }, + { 0x76, 0x04 }, + { 0x77, 0x04 }, + }; + + PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID)); + + rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511)); + if (rc < 0) + return rc; + + switch (sd->bridge) { + case BRIDGE_OV511: + rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511)); + if (rc < 0) + return rc; + break; + case BRIDGE_OV511PLUS: + rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p)); + if (rc < 0) + return rc; + break; + } + + /* Init compression */ + rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511)); + if (rc < 0) + return rc; + + rc = ov51x_upload_quan_tables(sd); + if (rc < 0) { + PDEBUG(D_ERR, "Error uploading quantization tables"); + return rc; + } + + return 0; +} + /* This initializes the OV518/OV518+ and the sensor */ static int ov518_configure(struct gspca_dev *gspca_dev) { @@ -1615,7 +1930,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev) break; } - rc = ov518_upload_quan_tables(sd); + rc = ov51x_upload_quan_tables(sd); if (rc < 0) { PDEBUG(D_ERR, "Error uploading quantization tables"); return rc; @@ -1661,6 +1976,10 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->invert_led = id->driver_info & BRIDGE_INVERT_LED; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_configure(gspca_dev); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: ret = ov518_configure(gspca_dev); @@ -1719,6 +2038,16 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + if (!sd->sif) { + cam->cam_mode = ov511_vga_mode; + cam->nmodes = ARRAY_SIZE(ov511_vga_mode); + } else { + cam->cam_mode = ov511_sif_mode; + cam->nmodes = ARRAY_SIZE(ov511_sif_mode); + } + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: if (!sd->sif) { @@ -1810,6 +2139,126 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } +/* Set up the OV511/OV511+ with the given image parameters. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int ov511_mode_init_regs(struct sd *sd) +{ + int hsegs, vsegs, packet_size, fps, needed; + int interlaced = 0; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5); + + reg_w(sd, R511_CAM_UV_EN, 0x01); + reg_w(sd, R511_SNAP_UV_EN, 0x01); + reg_w(sd, R511_SNAP_OPTS, 0x03); + + /* Here I'm assuming that snapshot size == image size. + * I hope that's always true. --claudio + */ + hsegs = (sd->gspca_dev.width >> 3) - 1; + vsegs = (sd->gspca_dev.height >> 3) - 1; + + reg_w(sd, R511_CAM_PXCNT, hsegs); + reg_w(sd, R511_CAM_LNCNT, vsegs); + reg_w(sd, R511_CAM_PXDIV, 0x00); + reg_w(sd, R511_CAM_LNDIV, 0x00); + + /* YUV420, low pass filter on */ + reg_w(sd, R511_CAM_OPTS, 0x03); + + /* Snapshot additions */ + reg_w(sd, R511_SNAP_PXCNT, hsegs); + reg_w(sd, R511_SNAP_LNCNT, vsegs); + reg_w(sd, R511_SNAP_PXDIV, 0x00); + reg_w(sd, R511_SNAP_LNDIV, 0x00); + + /******** Set the framerate ********/ + if (frame_rate > 0) + sd->frame_rate = frame_rate; + + switch (sd->sensor) { + case SEN_OV6620: + /* No framerate control, doesn't like higher rates yet */ + sd->clockdiv = 3; + break; + + /* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed + for more sensors we need to do this for them too */ + case SEN_OV7620: + case SEN_OV7640: + if (sd->gspca_dev.width == 320) + interlaced = 1; + /* Fall through */ + case SEN_OV6630: + case SEN_OV76BE: + case SEN_OV7610: + case SEN_OV7670: + switch (sd->frame_rate) { + case 30: + case 25: + /* Not enough bandwidth to do 640x480 @ 30 fps */ + if (sd->gspca_dev.width != 640) { + sd->clockdiv = 0; + break; + } + /* Fall through for 640x480 case */ + default: +/* case 20: */ +/* case 15: */ + sd->clockdiv = 1; + break; + case 10: + sd->clockdiv = 2; + break; + case 5: + sd->clockdiv = 5; + break; + } + if (interlaced) { + sd->clockdiv = (sd->clockdiv + 1) * 2 - 1; + /* Higher then 10 does not work */ + if (sd->clockdiv > 10) + sd->clockdiv = 10; + } + break; + + case SEN_OV8610: + /* No framerate control ?? */ + sd->clockdiv = 0; + break; + } + + /* Check if we have enough bandwidth to disable compression */ + fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1; + needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2; + /* 1400 is a conservative estimate of the max nr of isoc packets/sec */ + if (needed > 1400 * packet_size) { + /* Enable Y and UV quantization and compression */ + reg_w(sd, R511_COMP_EN, 0x07); + reg_w(sd, R511_COMP_LUT_EN, 0x03); + } else { + reg_w(sd, R511_COMP_EN, 0x06); + reg_w(sd, R511_COMP_LUT_EN, 0x00); + } + + reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE); + reg_w(sd, R51x_SYS_RESET, 0); + + return 0; +} + /* Sets up the OV518/OV518+ with the given image parameters * * OV518 needs a completely different approach, until we can figure out what @@ -2363,6 +2812,10 @@ static int sd_start(struct gspca_dev *gspca_dev) int ret = 0; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_mode_init_regs(sd); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: ret = ov518_mode_init_regs(sd); @@ -2403,6 +2856,56 @@ static void sd_stopN(struct gspca_dev *gspca_dev) ov51x_led_control(sd, 0); } +static void ov511_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *in, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th + * byte non-zero. The EOF packet has image width/height in the + * 10th and 11th bytes. The 9th byte is given as follows: + * + * bit 7: EOF + * 6: compression enabled + * 5: 422/420/400 modes + * 4: 422/420/400 modes + * 3: 1 + * 2: snapshot button on + * 1: snapshot frame + * 0: even/odd field + */ + if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) && + (in[8] & 0x08)) { + if (in[8] & 0x80) { + /* Frame end */ + if ((in[9] + 1) * 8 != gspca_dev->width || + (in[10] + 1) * 8 != gspca_dev->height) { + PDEBUG(D_ERR, "Invalid frame size, got: %dx%d," + " requested: %dx%d\n", + (in[9] + 1) * 8, (in[10] + 1) * 8, + gspca_dev->width, gspca_dev->height); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + /* Add 11 byte footer to frame, might be usefull */ + gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11); + return; + } else { + /* Frame start */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0); + sd->packet_nr = 0; + } + } + + /* Ignore the packet number */ + len--; + + /* intermediate packet */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len); +} + static void ov518_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -2495,6 +2998,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: + ov511_pkt_scan(gspca_dev, frame, data, len); break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: @@ -2862,12 +3366,15 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 }, {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS }, {USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS }, + {USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS }, {} }; diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 772d226..8a025d5 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -348,6 +348,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ #define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ +#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ /* -- 2.7.4