From 1852e75a55287156f2a435ca4ea4f8c1c75bac6c Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 27 Jun 2009 05:33:48 -0300 Subject: [PATCH] V4L/DVB (12228): gspca - vc032x: Webcam 0ac8:c301 added. Only the back sensor (mi1320_soc) is usable. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/vc032x.c | 46 ++++++++++++++++++++++++++----------- 2 files changed, 34 insertions(+), 13 deletions(-) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 8978386..7045ebf 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -248,6 +248,7 @@ zc3xx 0ac8:305b Z-star Vimicro zc0305b zc3xx 0ac8:307b Ldlc VC302+Ov7620 vc032x 0ac8:c001 Sony embedded vimicro vc032x 0ac8:c002 Sony embedded vimicro +vc032x 0ac8:c301 Samsung Q1 Ultra Premium spca508 0af9:0010 Hama USB Sightcam 100 spca508 0af9:0011 Hama USB Sightcam 100 sonixb 0c45:6001 Genius VideoCAM NB diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 26dd155..5b6f717 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -52,6 +52,7 @@ struct sd { #define SENSOR_OV7670 6 #define SENSOR_PO1200 7 #define SENSOR_PO3130NC 8 + u8 ninput; /* != 0 when 2 sensors - SamsungQ1 */ }; /* V4L2 controls supported by the driver */ @@ -2342,11 +2343,18 @@ static u16 read_sensor_register(struct gspca_dev *gspca_dev, static int vc032x_probe_sensor(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; int i; u16 value; const struct sensor_info *ptsensor_info; +/*fixme: should also check the other sensor (back mi1320_soc, front mc501cb)*/ + if (sd->ninput != 0) { + reg_w(dev, 0xa0, 0x01, 0xb301); + reg_w(dev, 0x89, 0xf0ff, 0xffff); /* select the back sensor */ + } + reg_r(gspca_dev, 0xa1, 0xbfcf, 1); PDEBUG(D_PROBE, "check sensor header %02x", gspca_dev->usb_buf[0]); for (i = 0; i < ARRAY_SIZE(sensor_info_data); i++) { @@ -2466,7 +2474,8 @@ static int sd_config(struct gspca_dev *gspca_dev, }; cam = &gspca_dev->cam; - sd->bridge = id->driver_info; + sd->bridge = id->driver_info >> 8; + sd->ninput = id->driver_info & 0xff; sensor = vc032x_probe_sensor(gspca_dev); switch (sensor) { case -1: @@ -2635,6 +2644,13 @@ static int sd_start(struct gspca_dev *gspca_dev) mi1320_soc_InitQVGA, }; +/*fixme: back sensor only*/ + if (sd->ninput != 0) { + reg_w(gspca_dev->dev, 0x89, 0xf0ff, 0xffff); + reg_w(gspca_dev->dev, 0xa9, 0x8348, 0x000e); + reg_w(gspca_dev->dev, 0xa9, 0x0000, 0x001a); + } + /* Assume start use the good resolution from gspca_dev->mode */ if (sd->bridge == BRIDGE_VC0321) { reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfec); @@ -2906,19 +2922,23 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ +#define BF(bridge, flags) \ + .driver_info = (BRIDGE_ ## bridge << 8) \ + | (flags) static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x041e, 0x405b), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x046d, 0x0892), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x046d, 0x0896), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x046d, 0x0897), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0x0321), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0x0323), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x0ac8, 0x0328), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0xc001), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0xc002), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x15b8, 0x6001), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x15b8, 0x6002), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x17ef, 0x4802), .driver_info = BRIDGE_VC0323}, + {USB_DEVICE(0x041e, 0x405b), BF(VC0323, 0)}, + {USB_DEVICE(0x046d, 0x0892), BF(VC0321, 0)}, + {USB_DEVICE(0x046d, 0x0896), BF(VC0321, 0)}, + {USB_DEVICE(0x046d, 0x0897), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0x0321), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0x0323), BF(VC0323, 0)}, + {USB_DEVICE(0x0ac8, 0x0328), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc001), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc002), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc301), BF(VC0323, 1)}, + {USB_DEVICE(0x15b8, 0x6001), BF(VC0323, 0)}, + {USB_DEVICE(0x15b8, 0x6002), BF(VC0323, 0)}, + {USB_DEVICE(0x17ef, 0x4802), BF(VC0323, 0)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); -- 2.7.4