From 178624403c04a4af315583eaf75ebb8545474544 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Tue, 26 Nov 2013 16:57:19 -0800 Subject: [PATCH] watchdog: s3c2410_wdt: Handle rounding a little better for timeout The existing watchdog timeout worked OK but didn't deal with rounding in an ideal way when dividing out all of its clocks. Specifically if you had a timeout of 32 seconds and an input clock of 66666666, you'd end up setting a timeout of 31.9998 seconds and reporting a timeout of 31 seconds. Specifically DBG printouts showed: s3c2410wdt_set_heartbeat: count=16666656, timeout=32, freq=520833 s3c2410wdt_set_heartbeat: timeout=32, divisor=255, count=16666656 (0000ff4f) and the final timeout reported to the user was: ((count / divisor) * divisor) / freq (0xff4f * 255) / 520833 = 31 (truncated from 31.9998) the technically "correct" value is: (0xff4f * 255) / (66666666.0 / 128) = 31.9998 By using "DIV_ROUND_UP" we can be a little more correct. s3c2410wdt_set_heartbeat: count=16666688, timeout=32, freq=520834 s3c2410wdt_set_heartbeat: timeout=32, divisor=255, count=16666688 (0000ff50) and the final timeout reported to the user: (0xff50 * 255) / 520834 = 32 the technically "correct" value is: (0xff50 * 255) / (66666666.0 / 128) = 32.0003 We'll use a DIV_ROUND_UP to solve this, generally erroring on the side of reporting shorter values to the user and setting the watchdog to slightly longer than requested: * Round input frequency up to assume watchdog is counting faster. * Round divisions by divisor up to give us extra time. At the same time we can avoid a for loop by just doing the right math. Signed-off-by: Doug Anderson Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index c1ada33..8beaa17 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -188,7 +188,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou if (timeout < 1) return -EINVAL; - freq /= 128; + freq = DIV_ROUND_UP(freq, 128); count = timeout * freq; DBG("%s: count=%d, timeout=%d, freq=%lu\n", @@ -200,21 +200,18 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou */ if (count >= 0x10000) { - for (divisor = 1; divisor <= 0x100; divisor++) { - if ((count / divisor) < 0x10000) - break; - } + divisor = DIV_ROUND_UP(count, 0xffff); - if ((count / divisor) >= 0x10000) { + if (divisor > 0x100) { dev_err(wdt->dev, "timeout %d too big\n", timeout); return -EINVAL; } } DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n", - __func__, timeout, divisor, count, count/divisor); + __func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor)); - count /= divisor; + count = DIV_ROUND_UP(count, divisor); wdt->count = count; /* update the pre-scaler */ -- 2.7.4