From 1689387487afaa68e5a91c454d78508b2d665b57 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 11 Oct 2019 16:43:45 +0200 Subject: [PATCH] dt-bindings: iio: adc: max1027: Mark interrupts as optional The chips have a 'start conversion' and a 'end of conversion' pair of pins. They can be used but this is absolutely not mandatory as regular polling is supported by the chip depending on its internal clocking setup. There is no physical reason to force the use of interrupts so turn them optional. Also, once the interrupt turned optional, these devices fit perfectly the "trivial devices" described in the generic (yaml) bindings file, so instead of converting this text file to json schema, we can just add the relevant compatibles in: Documentation/devicetree/bindings/trivial-devices.yaml. Signed-off-by: Miquel Raynal Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/max1027-adc.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt index e680c61..7b23d68 100644 --- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt @@ -3,6 +3,8 @@ Required properties: - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031" - reg: SPI chip select number for the device + +Optional properties: - interrupts: IRQ line for the ADC see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- 2.7.4