From 1685118f55209a518bb5efbbc91706f8b7fa7ffa Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Mon, 24 Sep 2012 21:12:00 +0400 Subject: [PATCH] serial: sccnxp: Report actual baudrate back to core Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sccnxp.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 05d767c..a7a6659 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -213,7 +213,7 @@ const struct baud_table baud_std[] = { { 0, 0, 0, 0 } }; -static void sccnxp_set_baud(struct uart_port *port, int baud) +static int sccnxp_set_baud(struct uart_port *port, int baud) { struct sccnxp_port *s = dev_get_drvdata(port->dev); int div_std, tmp_baud, bestbaud = baud, besterr = -1; @@ -244,8 +244,11 @@ static void sccnxp_set_baud(struct uart_port *port, int baud) sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE); sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr); - dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n", - baud, bestbaud); + if (baud != bestbaud) + dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n", + baud, bestbaud); + + return bestbaud; } static void sccnxp_enable_irq(struct uart_port *port, int mask) @@ -587,11 +590,14 @@ static void sccnxp_set_termios(struct uart_port *port, baud = uart_get_baud_rate(port, termios, old, 50, (s->flags & SCCNXP_HAVE_MR0) ? 230400 : 38400); - sccnxp_set_baud(port, baud); + baud = sccnxp_set_baud(port, baud); /* Update timeout according to new baud rate */ uart_update_timeout(port, termios->c_cflag, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + /* Enable RX & TX */ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE); -- 2.7.4