From 14b54e39b4121f679376d4175682fe47a9a86447 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 6 Nov 2011 19:06:20 +0100 Subject: [PATCH] USB: serial: remove changelogs and old todo entries Remove remaining changelogs from file headers (can still be retrieved through git). Remove even older changelog entries stored in Changelog.history. Remove outdated todo entries from belkin_sa. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ChangeLog.history | 730 ----------------------------------- drivers/usb/serial/belkin_sa.c | 43 --- drivers/usb/serial/cypress_m8.c | 26 -- drivers/usb/serial/digi_acceleport.c | 216 ----------- drivers/usb/serial/io_ti.c | 7 - drivers/usb/serial/ipaq.c | 34 -- drivers/usb/serial/ir-usb.c | 32 -- drivers/usb/serial/keyspan.c | 67 ---- drivers/usb/serial/keyspan_pda.c | 53 --- drivers/usb/serial/kobil_sct.c | 12 - drivers/usb/serial/mct_u232.c | 44 --- drivers/usb/serial/omninet.c | 25 -- drivers/usb/serial/whiteheat.c | 51 --- 13 files changed, 1340 deletions(-) delete mode 100644 drivers/usb/serial/ChangeLog.history diff --git a/drivers/usb/serial/ChangeLog.history b/drivers/usb/serial/ChangeLog.history deleted file mode 100644 index f13fd48..0000000 --- a/drivers/usb/serial/ChangeLog.history +++ /dev/null @@ -1,730 +0,0 @@ -This is the contents of some of the drivers/usb/serial/ files that had old -changelog comments. They were quite old, and out of date, and we don't keep -them anymore, so I've put them here, away from the source files, in case -people still care to see them. - -- Greg Kroah-Hartman October 20, 2005 - ------------------------------------------------------------------------ -usb-serial.h Change Log comments: - - (03/26/2002) gkh - removed the port->tty check from port_paranoia_check() due to serial - consoles not having a tty device assigned to them. - - (12/03/2001) gkh - removed active from the port structure. - added documentation to the usb_serial_device_type structure - - (10/10/2001) gkh - added vendor and product to serial structure. Needed to determine device - owner when the device is disconnected. - - (05/30/2001) gkh - added sem to port structure and removed port_lock - - (10/05/2000) gkh - Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help - fix bug with urb->dev not being set properly, now that the usb core - needs it. - - (09/11/2000) gkh - Added usb_serial_debug_data function to help get rid of #DEBUG in the - drivers. - - (08/28/2000) gkh - Added port_lock to port structure. - - (08/08/2000) gkh - Added open_count to port structure. - - (07/23/2000) gkh - Added bulk_out_endpointAddress to port structure. - - (07/19/2000) gkh, pberger, and borchers - Modifications to allow usb-serial drivers to be modules. - ------------------------------------------------------------------------ -usb-serial.c Change Log comments: - - (12/10/2002) gkh - Split the ports off into their own struct device, and added a - usb-serial bus driver. - - (11/19/2002) gkh - removed a few #ifdefs for the generic code and cleaned up the failure - logic in initialization. - - (10/02/2002) gkh - moved the console code to console.c and out of this file. - - (06/05/2002) gkh - moved location of startup() call in serial_probe() until after all - of the port information and endpoints are initialized. This makes - things easier for some drivers. - - (04/10/2002) gkh - added serial_read_proc function which creates a - /proc/tty/driver/usb-serial file. - - (03/27/2002) gkh - Got USB serial console code working properly and merged into the main - version of the tree. Thanks to Randy Dunlap for the initial version - of this code, and for pushing me to finish it up. - The USB serial console works with any usb serial driver device. - - (03/21/2002) gkh - Moved all manipulation of port->open_count into the core. Now the - individual driver's open and close functions are called only when the - first open() and last close() is called. Making the drivers a bit - smaller and simpler. - Fixed a bug if a driver didn't have the owner field set. - - (02/26/2002) gkh - Moved all locking into the main serial_* functions, instead of having - the individual drivers have to grab the port semaphore. This should - reduce races. - Reworked the MOD_INC logic a bit to always increment and decrement, even - if the generic driver is being used. - - (10/10/2001) gkh - usb_serial_disconnect() now sets the serial->dev pointer is to NULL to - help prevent child drivers from accessing the device since it is now - gone. - - (09/13/2001) gkh - Moved generic driver initialize after we have registered with the USB - core. Thanks to Randy Dunlap for pointing this problem out. - - (07/03/2001) gkh - Fixed module paramater size. Thanks to John Brockmeyer for the pointer. - Fixed vendor and product getting defined through the MODULE_PARM macro - if the Generic driver wasn't compiled in. - Fixed problem with generic_shutdown() not being called for drivers that - don't have a shutdown() function. - - (06/06/2001) gkh - added evil hack that is needed for the prolific pl2303 device due to the - crazy way its endpoints are set up. - - (05/30/2001) gkh - switched from using spinlock to a semaphore, which fixes lots of problems. - - (04/08/2001) gb - Identify version on module load. - - 2001_02_05 gkh - Fixed buffer overflows bug with the generic serial driver. Thanks to - Todd Squires for fixing this. - - (01/10/2001) gkh - Fixed bug where the generic serial adaptor grabbed _any_ device that was - offered to it. - - (12/12/2000) gkh - Removed MOD_INC and MOD_DEC from poll and disconnect functions, and - moved them to the serial_open and serial_close functions. - Also fixed bug with there not being a MOD_DEC for the generic driver - (thanks to Gary Brubaker for finding this.) - - (11/29/2000) gkh - Small NULL pointer initialization cleanup which saves a bit of disk image - - (11/01/2000) Adam J. Richter - instead of using idVendor/idProduct pairs, usb serial drivers - now identify their hardware interest with usb_device_id tables, - which they usually have anyhow for use with MODULE_DEVICE_TABLE. - - (10/05/2000) gkh - Fixed bug with urb->dev not being set properly, now that the usb - core needs it. - - (09/11/2000) gkh - Removed DEBUG #ifdefs with call to usb_serial_debug_data - - (08/28/2000) gkh - Added port_lock to port structure. - Added locks for SMP safeness to generic driver - Fixed the ability to open a generic device's port more than once. - - (07/23/2000) gkh - Added bulk_out_endpointAddress to port structure. - - (07/19/2000) gkh, pberger, and borchers - Modifications to allow usb-serial drivers to be modules. - - (07/03/2000) gkh - Added more debugging to serial_ioctl call - - (06/25/2000) gkh - Changed generic_write_bulk_callback to not call wake_up_interruptible - directly, but to have port_softint do it at a safer time. - - (06/23/2000) gkh - Cleaned up debugging statements in a quest to find UHCI timeout bug. - - (05/22/2000) gkh - Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be - removed from the individual device source files. - - (05/03/2000) gkh - Added the Digi Acceleport driver from Al Borchers and Peter Berger. - - (05/02/2000) gkh - Changed devfs and tty register code to work properly now. This was based on - the ACM driver changes by Vojtech Pavlik. - - (04/27/2000) Ryan VanderBijl - Put calls to *_paranoia_checks into one function. - - (04/23/2000) gkh - Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. - Moved when the startup code printed out the devices that are supported. - - (04/19/2000) gkh - Added driver for ZyXEL omni.net lcd plus ISDN TA - Made startup info message specify which drivers were compiled in. - - (04/03/2000) gkh - Changed the probe process to remove the module unload races. - Changed where the tty layer gets initialized to have devfs work nicer. - Added initial devfs support. - - (03/26/2000) gkh - Split driver up into device specific pieces. - - (03/19/2000) gkh - Fixed oops that could happen when device was removed while a program - was talking to the device. - Removed the static urbs and now all urbs are created and destroyed - dynamically. - Reworked the internal interface. Now everything is based on the - usb_serial_port structure instead of the larger usb_serial structure. - This fixes the bug that a multiport device could not have more than - one port open at one time. - - (03/17/2000) gkh - Added config option for debugging messages. - Added patch for keyspan pda from Brian Warner. - - (03/06/2000) gkh - Added the keyspan pda code from Brian Warner - Moved a bunch of the port specific stuff into its own structure. This - is in anticipation of the true multiport devices (there's a bug if you - try to access more than one port of any multiport device right now) - - (02/21/2000) gkh - Made it so that any serial devices only have to specify which functions - they want to overload from the generic function calls (great, - inheritance in C, in a driver, just what I wanted...) - Added support for set_termios and ioctl function calls. No drivers take - advantage of this yet. - Removed the #ifdef MODULE, now there is no module specific code. - Cleaned up a few comments in usb-serial.h that were wrong (thanks again - to Miles Lott). - Small fix to get_free_serial. - - (02/14/2000) gkh - Removed the Belkin and Peracom functionality from the driver due to - the lack of support from the vendor, and me not wanting people to - accidenatly buy the device, expecting it to work with Linux. - Added read_bulk_callback and write_bulk_callback to the type structure - for the needs of the FTDI and WhiteHEAT driver. - Changed all reverences to FTDI to FTDI_SIO at the request of Bill - Ryder. - Changed the output urb size back to the max endpoint size to make - the ftdi_sio driver have it easier, and due to the fact that it didn't - really increase the speed any. - - (02/11/2000) gkh - Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a - patch from Miles Lott (milos@insync.net). - Fixed bug with not restoring the minor range that a device grabs, if - the startup function fails (thanks Miles for finding this). - - (02/05/2000) gkh - Added initial framework for the Keyspan PDA serial converter so that - Brian Warner has a place to put his code. - Made the ezusb specific functions generic enough that different - devices can use them (whiteheat and keyspan_pda both need them). - Split out a whole bunch of structure and other stuff to a separate - usb-serial.h file. - Made the Visor connection messages a little more understandable, now - that Miles Lott (milos@insync.net) has gotten the Generic channel to - work. Also made them always show up in the log file. - - (01/25/2000) gkh - Added initial framework for FTDI serial converter so that Bill Ryder - has a place to put his code. - Added the vendor specific info from Handspring. Now we can print out - informational debug messages as well as understand what is happening. - - (01/23/2000) gkh - Fixed problem of crash when trying to open a port that didn't have a - device assigned to it. Made the minor node finding a little smarter, - now it looks to find a continuous space for the new device. - - (01/21/2000) gkh - Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) - Fixed get_serial_by_minor which was all messed up for multi port - devices. Fixed multi port problem for generic devices. Now the number - of ports is determined by the number of bulk out endpoints for the - generic device. - - (01/19/2000) gkh - Removed lots of cruft that was around from the old (pre urb) driver - interface. - Made the serial_table dynamic. This should save lots of memory when - the number of minor nodes goes up to 256. - Added initial support for devices that have more than one port. - Added more debugging comments for the Visor, and added a needed - set_configuration call. - - (01/17/2000) gkh - Fixed the WhiteHEAT firmware (my processing tool had a bug) - and added new debug loader firmware for it. - Removed the put_char function as it isn't really needed. - Added visor startup commands as found by the Win98 dump. - - (01/13/2000) gkh - Fixed the vendor id for the generic driver to the one I meant it to be. - - (01/12/2000) gkh - Forget the version numbering...that's pretty useless... - Made the driver able to be compiled so that the user can select which - converter they want to use. This allows people who only want the Visor - support to not pay the memory size price of the WhiteHEAT. - Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) - grabbed the root hub. Not good. - - version 0.4.0 (01/10/2000) gkh - Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT - device. Added startup function to allow firmware to be downloaded to - a device if it needs to be. - Added firmware download logic to the WhiteHEAT device. - Started to add #defines to split up the different drivers for potential - configuration option. - - version 0.3.1 (12/30/99) gkh - Fixed problems with urb for bulk out. - Added initial support for multiple sets of endpoints. This enables - the Handspring Visor to be attached successfully. Only the first - bulk in / bulk out endpoint pair is being used right now. - - version 0.3.0 (12/27/99) gkh - Added initial support for the Handspring Visor based on a patch from - Miles Lott (milos@sneety.insync.net) - Cleaned up the code a bunch and converted over to using urbs only. - - version 0.2.3 (12/21/99) gkh - Added initial support for the Connect Tech WhiteHEAT converter. - Incremented the number of ports in expectation of getting the - WhiteHEAT to work properly (4 ports per connection). - Added notification on insertion and removal of what port the - device is/was connected to (and what kind of device it was). - - version 0.2.2 (12/16/99) gkh - Changed major number to the new allocated number. We're legal now! - - version 0.2.1 (12/14/99) gkh - Fixed bug that happens when device node is opened when there isn't a - device attached to it. Thanks to marek@webdesign.no for noticing this. - - version 0.2.0 (11/10/99) gkh - Split up internals to make it easier to add different types of serial - converters to the code. - Added a "generic" driver that gets it's vendor and product id - from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) - for the idea and sample code (from the usb scanner driver.) - Cleared up any licensing questions by releasing it under the GNU GPL. - - version 0.1.2 (10/25/99) gkh - Fixed bug in detecting device. - - version 0.1.1 (10/05/99) gkh - Changed the major number to not conflict with anything else. - - version 0.1 (09/28/99) gkh - Can recognize the two different devices and start up a read from - device when asked to. Writes also work. No control signals yet, this - all is vendor specific data (i.e. no spec), also no control for - different baud rates or other bit settings. - Currently we are using the same devid as the acm driver. This needs - to change. - ------------------------------------------------------------------------ -visor.c Change Log comments: - - (06/03/2003) Judd Montgomery - Added support for module parameter options for untested/unknown - devices. - - (03/09/2003) gkh - Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - for the information. - - (03/05/2003) gkh - Think Treo support is now working. - - (04/03/2002) gkh - Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - for the information. - - (03/27/2002) gkh - Removed assumptions that port->tty was always valid (is not true - for usb serial console devices.) - - (03/23/2002) gkh - Added support for the Palm i705 device, thanks to Thomas Riemer - for the information. - - (03/21/2002) gkh - Added support for the Palm m130 device, thanks to Udo Eisenbarth - for the information. - - (02/27/2002) gkh - Reworked the urb handling logic. We have no more pool, but dynamically - allocate the urb and the transfer buffer on the fly. In testing this - does not incure any measurable overhead. This also relies on the fact - that we have proper reference counting logic for urbs. - - (02/21/2002) SilaS - Added initial support for the Palm m515 devices. - - (02/14/2002) gkh - Added support for the Clie S-360 device. - - (12/18/2001) gkh - Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - for the patch. - - (11/11/2001) gkh - Added support for the m125 devices, and added check to prevent oopses - for Clié devices that lie about the number of ports they have. - - (08/30/2001) gkh - Added support for the Clie devices, both the 3.5 and 4.0 os versions. - Many thanks to Daniel Burke, and Bryan Payne for helping with this. - - (08/23/2001) gkh - fixed a few potential bugs pointed out by Oliver Neukum. - - (05/30/2001) gkh - switched from using spinlock to a semaphore, which fixes lots of problems. - - (05/28/2000) gkh - Added initial support for the Palm m500 and Palm m505 devices. - - (04/08/2001) gb - Identify version on module load. - - (01/21/2000) gkh - Added write_room and chars_in_buffer, as they were previously using the - generic driver versions which is all wrong now that we are using an urb - pool. Thanks to Wolfgang Grandegger for pointing this out to me. - Removed count assignment in the write function, which was not needed anymore - either. Thanks to Al Borchers for pointing this out. - - (12/12/2000) gkh - Moved MOD_DEC to end of visor_close to be nicer, as the final write - message can sleep. - - (11/12/2000) gkh - Fixed bug with data being dropped on the floor by forcing tty->low_latency - to be on. Hopefully this fixes the OHCI issue! - - (11/01/2000) Adam J. Richter - usb_device_id table support - - (10/05/2000) gkh - Fixed bug with urb->dev not being set properly, now that the usb - core needs it. - - (09/11/2000) gkh - Got rid of always calling kmalloc for every urb we wrote out to the - device. - Added visor_read_callback so we can keep track of bytes in and out for - those people who like to know the speed of their device. - Removed DEBUG #ifdefs with call to usb_serial_debug_data - - (09/06/2000) gkh - Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - the host controller drivers set urb->dev = NULL when the urb is finished. - - (08/28/2000) gkh - Added locks for SMP safeness. - - (08/08/2000) gkh - Fixed endian problem in visor_startup. - Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - than once. - - (07/23/2000) gkh - Added pool of write urbs to speed up transfers to the visor. - - (07/19/2000) gkh - Added module_init and module_exit functions to handle the fact that this - driver is a loadable module now. - - (07/03/2000) gkh - Added visor_set_ioctl and visor_set_termios functions (they don't do much - of anything, but are good for debugging.) - - (06/25/2000) gkh - Fixed bug in visor_unthrottle that should help with the disconnect in PPP - bug that people have been reporting. - - (06/23/2000) gkh - Cleaned up debugging statements in a quest to find UHCI timeout bug. - - (04/27/2000) Ryan VanderBijl - Fixed memory leak in visor_close - - (03/26/2000) gkh - Split driver up into device specific pieces. - ------------------------------------------------------------------------ -pl2303.c Change Log comments: - - 2002_Mar_26 gkh - allowed driver to work properly if there is no tty assigned to a port - (this happens for serial console devices.) - - 2001_Oct_06 gkh - Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. - - 2001_Sep_19 gkh - Added break support. - - 2001_Aug_30 gkh - fixed oops in write_bulk_callback. - - 2001_Aug_28 gkh - reworked buffer logic to be like other usb-serial drivers. Hopefully - removing some reported problems. - - 2001_Jun_06 gkh - finished porting to 2.4 format. - - ------------------------------------------------------------------------ -io_edgeport.c Change Log comments: - - 2003_04_03 al borchers - - fixed a bug (that shows up with dosemu) where the tty struct is - used in a callback after it has been freed - - 2.3 2002_03_08 greg kroah-hartman - - fixed bug when multiple devices were attached at the same time. - - 2.2 2001_11_14 greg kroah-hartman - - fixed bug in edge_close that kept the port from being used more - than once. - - fixed memory leak on device removal. - - fixed potential double free of memory when command urb submitting - failed. - - other small cleanups when the device is removed - - 2.1 2001_07_09 greg kroah-hartman - - added support for TIOCMBIS and TIOCMBIC. - - (04/08/2001) gb - - Identify version on module load. - - 2.0 2001_03_05 greg kroah-hartman - - reworked entire driver to fit properly in with the other usb-serial - drivers. Occasional oopses still happen, but it's a good start. - - 1.2.3 (02/23/2001) greg kroah-hartman - - changed device table to work properly for 2.4.x final format. - - fixed problem with dropping data at high data rates. - - 1.2.2 (11/27/2000) greg kroah-hartman - - cleaned up more NTisms. - - Added device table for 2.4.0-test11 - - 1.2.1 (11/08/2000) greg kroah-hartman - - Started to clean up NTisms. - - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 - - 1.2 (10/17/2000) David Iacovelli - Remove all EPIC code and GPL source - Fix RELEVANT_IFLAG macro to include flow control - changes port configuration changes. - Fix redefinition of SERIAL_MAGIC - Change all timeout values to 5 seconds - Tried to fix the UHCI multiple urb submission, but failed miserably. - it seems to work fine with OHCI. - ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must - find a way to work arount this UHCI bug ) - - 1.1 (10/11/2000) David Iacovelli - Fix XON/XOFF flow control to support both IXON and IXOFF - - 0.9.27 (06/30/2000) David Iacovelli - Added transmit queue and now allocate urb for command writes. - - 0.9.26 (06/29/2000) David Iacovelli - Add support for 80251 based edgeport - - 0.9.25 (06/27/2000) David Iacovelli - Do not close the port if it has multiple opens. - - 0.9.24 (05/26/2000) David Iacovelli - Add IOCTLs to support RXTX and JAVA POS - and first cut at running BlackBox Demo - - 0.9.23 (05/24/2000) David Iacovelli - Add IOCTLs to support RXTX and JAVA POS - - 0.9.22 (05/23/2000) David Iacovelli - fixed bug in enumeration. If epconfig turns on mapping by - path after a device is already plugged in, we now update - the mapping correctly - - 0.9.21 (05/16/2000) David Iacovelli - Added BlockUntilChaseResp() to also wait for txcredits - Updated the way we allocate and handle write URBs - Add debug code to dump buffers - - 0.9.20 (05/01/2000) David Iacovelli - change driver to use usb/tts/ - - 0.9.19 (05/01/2000) David Iacovelli - Update code to compile if DEBUG is off - - 0.9.18 (04/28/2000) David Iacovelli - cleanup and test tty_register with devfs - - 0.9.17 (04/27/2000) greg kroah-hartman - changed tty_register around to be like the way it - was before, but now it works properly with devfs. - - 0.9.16 (04/26/2000) david iacovelli - Fixed bug in GetProductInfo() - - 0.9.15 (04/25/2000) david iacovelli - Updated enumeration - - 0.9.14 (04/24/2000) david iacovelli - Removed all config/status IOCTLS and - converted to using /proc/edgeport - still playing with devfs - - 0.9.13 (04/24/2000) david iacovelli - Removed configuration based on ttyUSB0 - Added support for configuration using /prod/edgeport - first attempt at using devfs (not working yet!) - Added IOCTL to GetProductInfo() - Added support for custom baud rates - Add support for random port numbers - - 0.9.12 (04/18/2000) david iacovelli - added additional configuration IOCTLs - use ttyUSB0 for configuration - - 0.9.11 (04/17/2000) greg kroah-hartman - fixed module initialization race conditions. - made all urbs dynamically allocated. - made driver devfs compatible. now it only registers the tty device - when the device is actually plugged in. - - 0.9.10 (04/13/2000) greg kroah-hartman - added proc interface framework. - - 0.9.9 (04/13/2000) david iacovelli - added enumeration code and ioctls to configure the device - - 0.9.8 (04/12/2000) david iacovelli - Change interrupt read start when device is plugged in - and stop when device is removed - process interrupt reads when all ports are closed - (keep value of rxBytesAvail consistent with the edgeport) - set the USB_BULK_QUEUE flag so that we can shove a bunch - of urbs at once down the pipe - - 0.9.7 (04/10/2000) david iacovelli - start to add enumeration code. - generate serial number for epic devices - add support for kdb - - 0.9.6 (03/30/2000) david iacovelli - add IOCTL to get string, manufacture, and boot descriptors - - 0.9.5 (03/14/2000) greg kroah-hartman - more error checking added to SerialOpen to try to fix UHCI open problem - - 0.9.4 (03/09/2000) greg kroah-hartman - added more error checking to handle oops when data is hanging - around and tty is abruptly closed. - - 0.9.3 (03/09/2000) david iacovelli - Add epic support for xon/xoff chars - play with performance - - 0.9.2 (03/08/2000) greg kroah-hartman - changed most "info" calls to "dbg" - implemented flow control properly in the termios call - - 0.9.1 (03/08/2000) david iacovelli - added EPIC support - enabled bootloader update - - 0.9 (03/08/2000) greg kroah-hartman - Release to IO networks. - Integrated changes that David made - made getting urbs for writing SMP safe - - 0.8 (03/07/2000) greg kroah-hartman - Release to IO networks. - Fixed problems that were seen in code by David. - Now both Edgeport/4 and Edgeport/2 works properly. - Changed most of the functions to use port instead of serial. - - 0.7 (02/27/2000) greg kroah-hartman - Milestone 3 release. - Release to IO Networks - ioctl for waiting on line change implemented. - ioctl for getting statistics implemented. - multiport support working. - lsr and msr registers are now handled properly. - change break now hooked up and working. - support for all known Edgeport devices. - - 0.6 (02/22/2000) greg kroah-hartman - Release to IO networks. - CHASE is implemented correctly when port is closed. - SerialOpen now blocks correctly until port is fully opened. - - 0.5 (02/20/2000) greg kroah-hartman - Release to IO networks. - Known problems: - modem status register changes are not sent on to the user - CHASE is not implemented when the port is closed. - - 0.4 (02/16/2000) greg kroah-hartman - Second cut at the CeBit demo. - Doesn't leak memory on every write to the port - Still small leaks on startup. - Added support for Edgeport/2 and Edgeport/8 - - 0.3 (02/15/2000) greg kroah-hartman - CeBit demo release. - Force the line settings to 4800, 8, 1, e for the demo. - Warning! This version leaks memory like crazy! - - 0.2 (01/30/2000) greg kroah-hartman - Milestone 1 release. - Device is found by USB subsystem, enumerated, firmware is downloaded - and the descriptors are printed to the debug log, config is set, and - green light starts to blink. Open port works, and data can be sent - and received at the default settings of the UART. Loopback connector - and debug log confirms this. - - 0.1 (01/23/2000) greg kroah-hartman - Initial release to help IO Networks try to set up their test system. - Edgeport4 is recognized, firmware is downloaded, config is set so - device blinks green light every 3 sec. Port is bound, but opening, - closing, and sending data do not work properly. - - diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index d6921fa..f9f29b2 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -20,50 +20,7 @@ * TODO: * -- Add true modem contol line query capability. Currently we track the * states reported by the interrupt and the states we request. - * -- Add error reporting back to application for UART error conditions. - * Just point me at how to implement this and I'll do it. I've put the - * framework in, but haven't analyzed the "tty_flip" interface yet. * -- Add support for flush commands - * -- Add everything that is missing :) - * - * 27-Nov-2001 gkh - * compressed all the differnent device entries into 1. - * - * 30-May-2001 gkh - * switched from using spinlock to a semaphore, which fixes lots of - * problems. - * - * 08-Apr-2001 gb - * - Identify version on module load. - * - * 12-Mar-2001 gkh - * - Added support for the GoHubs GO-COM232 device which is the same as the - * Peracom device. - * - * 06-Nov-2000 gkh - * - Added support for the old Belkin and Peracom devices. - * - Made the port able to be opened multiple times. - * - Added some defaults incase the line settings are things these devices - * can't support. - * - * 18-Oct-2000 William Greathouse - * Released into the wild (linux-usb-devel) - * - * 17-Oct-2000 William Greathouse - * Add code to recognize firmware version and set hardware flow control - * appropriately. Belkin states that firmware prior to 3.05 does not - * operate correctly in hardware handshake mode. I have verified this - * on firmware 2.05 -- for both RTS and DTR input flow control, the control - * line is not reset. The test performed by the Belkin Win* driver is - * to enable hardware flow control for firmware 2.06 or greater and - * for 1.00 or prior. I am only enabling for 2.06 or greater. - * - * 12-Oct-2000 William Greathouse - * First cut at supporting Belkin USB Serial Adapter F5U103 - * I did not have a copy of the original work to support this - * adapter, so pardon any stupid mistakes. All of the information - * I am using to write this driver was acquired by using a modified - * UsbSnoop on Windows2000 and from examining the other USB drivers. */ #include diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d9906eb..b20440e 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -16,32 +16,6 @@ * * See http://geocities.com/i0xox0i for information on this driver and the * earthmate usb device. - * - * Lonnie Mendez - * 4-29-2005 - * Fixed problem where setting or retreiving the serial config would fail - * with EPIPE. Removed CRTS toggling so the driver behaves more like - * other usbserial adapters. Issued new interval of 1ms instead of the - * default 10ms. As a result, transfer speed has been substantially - * increased from avg. 850bps to avg. 3300bps. initial termios has also - * been modified. Cleaned up code and formatting issues so it is more - * readable. Replaced the C++ style comments. - * - * Lonnie Mendez - * 12-15-2004 - * Incorporated write buffering from pl2303 driver. Fixed bug with line - * handling so both lines are raised in cypress_open. (was dropping rts) - * Various code cleanups made as well along with other misc bug fixes. - * - * Lonnie Mendez - * 04-10-2004 - * Driver modified to support dynamic line settings. Various improvements - * and features. - * - * Neil Whelchel - * 10-2003 - * Driver first released. - * */ /* Thanks to Neil Whelchel for writing the first cypress m8 implementation diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index e92cbefc..3786e95 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -13,222 +13,6 @@ * * Peter Berger (pberger@brimson.com) * Al Borchers (borchers@steinerpoint.com) -* -* (12/03/2001) gkh -* switched to using port->port.count instead of private version. -* Removed port->active -* -* (04/08/2001) gb -* Identify version on module load. -* -* (11/01/2000) Adam J. Richter -* usb_device_id table support -* -* (11/01/2000) pberger and borchers -* -- Turned off the USB_DISABLE_SPD flag for write bulk urbs--it caused -* USB 4 ports to hang on startup. -* -- Serialized access to write urbs by adding the dp_write_urb_in_use -* flag; otherwise, the driver caused SMP system hangs. Watching the -* urb status is not sufficient. -* -* (10/05/2000) gkh -* -- Fixed bug with urb->dev not being set properly, now that the usb -* core needs it. -* -* (8/8/2000) pberger and borchers -* -- Fixed close so that -* - it can timeout while waiting for transmit idle, if needed; -* - it ignores interrupts when flushing the port, turning -* of modem signalling, and so on; -* - it waits for the flush to really complete before returning. -* -- Read_bulk_callback and write_bulk_callback check for a closed -* port before using the tty struct or writing to the port. -* -- The two changes above fix the oops caused by interrupted closes. -* -- Added interruptible args to write_oob_command and set_modem_signals -* and added a timeout arg to transmit_idle; needed for fixes to -* close. -* -- Added code for rx_throttle and rx_unthrottle so that input flow -* control works. -* -- Added code to set overrun, parity, framing, and break errors -* (untested). -* -- Set USB_DISABLE_SPD flag for write bulk urbs, so no 0 length -* bulk writes are done. These hung the Digi USB device. The -* 0 length bulk writes were a new feature of usb-uhci added in -* the 2.4.0-test6 kernels. -* -- Fixed mod inc race in open; do mod inc before sleeping to wait -* for a close to finish. -* -* (7/31/2000) pberger -* -- Fixed bugs with hardware handshaking: -* - Added code to set/clear tty->hw_stopped in digi_read_oob_callback() -* and digi_set_termios() -* -- Added code in digi_set_termios() to -* - add conditional in code handling transition from B0 to only -* set RTS if RTS/CTS flow control is either not in use or if -* the port is not currently throttled. -* - handle turning off CRTSCTS. -* -* (7/30/2000) borchers -* -- Added support for more than one Digi USB device by moving -* globals to a private structure in the pointed to from the -* usb_serial structure. -* -- Moved the modem change and transmit idle wait queues into -* the port private structure, so each port has its own queue -* rather than sharing global queues. -* -- Added support for break signals. -* -* (7/25/2000) pberger -* -- Added USB-2 support. Note: the USB-2 supports 3 devices: two -* serial and a parallel port. The parallel port is implemented -* as a serial-to-parallel converter. That is, the driver actually -* presents all three USB-2 interfaces as serial ports, but the third -* one physically connects to a parallel device. Thus, for example, -* one could plug a parallel printer into the USB-2's third port, -* but from the kernel's (and userland's) point of view what's -* actually out there is a serial device. -* -* (7/15/2000) borchers -* -- Fixed race in open when a close is in progress. -* -- Keep count of opens and dec the module use count for each -* outstanding open when shutdown is called (on disconnect). -* -- Fixed sanity checks in read_bulk_callback and write_bulk_callback -* so pointers are checked before use. -* -- Split read bulk callback into in band and out of band -* callbacks, and no longer restart read chains if there is -* a status error or a sanity error. This fixed the seg -* faults and other errors we used to get on disconnect. -* -- Port->active is once again a flag as usb-serial intended it -* to be, not a count. Since it was only a char it would -* have been limited to 256 simultaneous opens. Now the open -* count is kept in the port private structure in dp_open_count. -* -- Added code for modularization of the digi_acceleport driver. -* -* (6/27/2000) pberger and borchers -* -- Zeroed out sync field in the wakeup_task before first use; -* otherwise the uninitialized value might prevent the task from -* being scheduled. -* -- Initialized ret value to 0 in write_bulk_callback, otherwise -* the uninitialized value could cause a spurious debugging message. -* -* (6/22/2000) pberger and borchers -* -- Made cond_wait_... inline--apparently on SPARC the flags arg -* to spin_lock_irqsave cannot be passed to another function -* to call spin_unlock_irqrestore. Thanks to Pauline Middelink. -* -- In digi_set_modem_signals the inner nested spin locks use just -* spin_lock() rather than spin_lock_irqsave(). The old code -* mistakenly left interrupts off. Thanks to Pauline Middelink. -* -- copy_from_user (which can sleep) is no longer called while a -* spinlock is held. We copy to a local buffer before getting -* the spinlock--don't like the extra copy but the code is simpler. -* -- Printk and dbg are no longer called while a spin lock is held. -* -* (6/4/2000) pberger and borchers -* -- Replaced separate calls to spin_unlock_irqrestore and -* interruptible_sleep_on_timeout with a new function -* cond_wait_interruptible_timeout_irqrestore. This eliminates -* the race condition where the wake up could happen after -* the unlock and before the sleep. -* -- Close now waits for output to drain. -* -- Open waits until any close in progress is finished. -* -- All out of band responses are now processed, not just the -* first in a USB packet. -* -- Fixed a bug that prevented the driver from working when the -* first Digi port was not the first USB serial port--the driver -* was mistakenly using the external USB serial port number to -* try to index into its internal ports. -* -- Fixed an SMP bug -- write_bulk_callback is called directly from -* an interrupt, so spin_lock_irqsave/spin_unlock_irqrestore are -* needed for locks outside write_bulk_callback that are also -* acquired by write_bulk_callback to prevent deadlocks. -* -- Fixed support for select() by making digi_chars_in_buffer() -* return 256 when -EINPROGRESS is set, as the line discipline -* code in n_tty.c expects. -* -- Fixed an include file ordering problem that prevented debugging -* messages from working. -* -- Fixed an intermittent timeout problem that caused writes to -* sometimes get stuck on some machines on some kernels. It turns -* out in these circumstances write_chan() (in n_tty.c) was -* asleep waiting for our wakeup call. Even though we call -* wake_up_interruptible() in digi_write_bulk_callback(), there is -* a race condition that could cause the wakeup to fail: if our -* wake_up_interruptible() call occurs between the time that our -* driver write routine finishes and write_chan() sets current->state -* to TASK_INTERRUPTIBLE, the effect of our wakeup setting the state -* to TASK_RUNNING will be lost and write_chan's subsequent call to -* schedule() will never return (unless it catches a signal). -* This race condition occurs because write_bulk_callback() (and thus -* the wakeup) are called asynchronously from an interrupt, rather than -* from the scheduler. We can avoid the race by calling the wakeup -* from the scheduler queue and that's our fix: Now, at the end of -* write_bulk_callback() we queue up a wakeup call on the scheduler -* task queue. We still also invoke the wakeup directly since that -* squeezes a bit more performance out of the driver, and any lost -* race conditions will get cleaned up at the next scheduler run. -* -* NOTE: The problem also goes away if you comment out -* the two code lines in write_chan() where current->state -* is set to TASK_RUNNING just before calling driver.write() and to -* TASK_INTERRUPTIBLE immediately afterwards. This is why the -* problem did not show up with the 2.2 kernels -- they do not -* include that code. -* -* (5/16/2000) pberger and borchers -* -- Added timeouts to sleeps, to defend against lost wake ups. -* -- Handle transition to/from B0 baud rate in digi_set_termios. -* -* (5/13/2000) pberger and borchers -* -- All commands now sent on out of band port, using -* digi_write_oob_command. -* -- Get modem control signals whenever they change, support TIOCMGET/ -* SET/BIS/BIC ioctls. -* -- digi_set_termios now supports parity, word size, stop bits, and -* receive enable. -* -- Cleaned up open and close, use digi_set_termios and -* digi_write_oob_command to set port parameters. -* -- Added digi_startup_device to start read chains on all ports. -* -- Write buffer is only used when count==1, to be sure put_char can -* write a char (unless the buffer is full). -* -* (5/10/2000) pberger and borchers -* -- Added MOD_INC_USE_COUNT/MOD_DEC_USE_COUNT calls on open/close. -* -- Fixed problem where the first incoming character is lost on -* port opens after the first close on that port. Now we keep -* the read_urb chain open until shutdown. -* -- Added more port conditioning calls in digi_open and digi_close. -* -- Convert port->active to a use count so that we can deal with multiple -* opens and closes properly. -* -- Fixed some problems with the locking code. -* -* (5/3/2000) pberger and borchers -* -- First alpha version of the driver--many known limitations and bugs. -* -* -* Locking and SMP -* -* - Each port, including the out-of-band port, has a lock used to -* serialize all access to the port's private structure. -* - The port lock is also used to serialize all writes and access to -* the port's URB. -* - The port lock is also used for the port write_wait condition -* variable. Holding the port lock will prevent a wake up on the -* port's write_wait; this can be used with cond_wait_... to be sure -* the wake up is not lost in a race when dropping the lock and -* sleeping waiting for the wakeup. -* - digi_write() does not sleep, since it is sometimes called on -* interrupt time. -* - digi_write_bulk_callback() and digi_read_bulk_callback() are -* called directly from interrupts. Hence spin_lock_irqsave() -* and spin_unlock_irqrestore() are used in the rest of the code -* for any locks they acquire. -* - digi_write_bulk_callback() gets the port lock before waking up -* processes sleeping on the port write_wait. It also schedules -* wake ups so they happen from the scheduler, because the tty -* system can miss wake ups from interrupts. -* - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to -* recheck the condition they are sleeping on. This is defensive, -* in case a wake up is lost. -* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks -* are held when calling copy_to/from_user or printk. */ #include diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 0aac00a..e42ddfc 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -15,13 +15,6 @@ * For questions or problems with this driver, contact Inside Out * Networks technical support, or Peter Berger , * or Al Borchers . - * - * Version history: - * - * July 11, 2002 Removed 4 port device structure since all TI UMP - * chips have only 2 ports - * David Iacovelli (davidi@ionetworks.com) - * */ #include diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 4735931..36f5cbe 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -8,40 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * (12/12/2002) ganesh - * Added support for practically all devices supported by ActiveSync - * on Windows. Thanks to Wes Cilldhaire . - * - * (26/11/2002) ganesh - * Added insmod options to specify product and vendor id. - * Use modprobe ipaq vendor=0xfoo product=0xbar - * - * (26/7/2002) ganesh - * Fixed up broken error handling in ipaq_open. Retry the "kickstart" - * packet much harder - this drastically reduces connection failures. - * - * (30/4/2002) ganesh - * Added support for the Casio EM500. Completely untested. Thanks - * to info from Nathan - * - * (19/3/2002) ganesh - * Don't submit urbs while holding spinlocks. Not strictly necessary - * in 2.5.x. - * - * (8/3/2002) ganesh - * The ipaq sometimes emits a '\0' before the CLIENT string. At this - * point of time, the ppp ldisc is not yet attached to the tty, so - * n_tty echoes "^ " to the ipaq, which messes up the chat. In 2.5.6-pre2 - * this causes a panic because echo_char() tries to sleep in interrupt - * context. - * The fix is to tell the upper layers that this is a raw device so that - * echoing is suppressed. Thanks to Lyle Lindholm for a detailed bug - * report. - * - * (25/2/2002) ganesh - * Added support for the HP Jornada 548 and 568. Completely untested. - * Thanks to info from Heath Robinson and Arieh Davidoff. */ #include diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index ccbce40..0c537da 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -22,38 +22,6 @@ * * See Documentation/usb/usb-serial.txt for more information on using this * driver - * - * 2008_Jun_02 Felipe Balbi - * Introduced common header to be used also in USB Gadget Framework. - * Still needs some other style fixes. - * - * 2007_Jun_21 Alan Cox - * Minimal cleanups for some of the driver problens and tty layer abuse. - * Still needs fixing to allow multiple dongles. - * - * 2002_Mar_07 greg kh - * moved some needed structures and #define values from the - * net/irda/irda-usb.h file into our file, as we don't want to depend on - * that codebase compiling correctly :) - * - * 2002_Jan_14 gb - * Added module parameter to force specific number of XBOFs. - * Added ir_xbof_change(). - * Reorganized read_bulk_callback error handling. - * Switched from FILL_BULK_URB() to usb_fill_bulk_urb(). - * - * 2001_Nov_08 greg kh - * Changed the irda_usb_find_class_desc() function based on comments and - * code from Martin Diehl. - * - * 2001_Nov_01 greg kh - * Added support for more IrDA USB devices. - * Added support for zero packet. Added buffer override paramater, so - * users can transfer larger packets at once if they wish. Both patches - * came from Dag Brattli . - * - * 2001_Oct_07 greg kh - * initial version released. */ #include diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index a442352..6535662 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -25,73 +25,6 @@ Tip 'o the hat to IBM (and previously Linuxcare :) for supporting staff in their work on open source projects. - - Change History - - 2003sep04 LPM (Keyspan) add support for new single port product USA19HS. - Improve setup message handling for all devices. - - Wed Feb 19 22:00:00 PST 2003 (Jeffrey S. Laing ) - Merged the current (1/31/03) Keyspan code with the current (2.4.21-pre4) - Linux source tree. The Linux tree lacked support for the 49WLC and - others. The Keyspan patches didn't work with the current kernel. - - 2003jan30 LPM add support for the 49WLC and MPR - - Wed Apr 25 12:00:00 PST 2002 (Keyspan) - Started with Hugh Blemings' code dated Jan 17, 2002. All adapters - now supported (including QI and QW). Modified port open, port - close, and send setup() logic to fix various data and endpoint - synchronization bugs and device LED status bugs. Changed keyspan_ - write_room() to accurately return transmit buffer availability. - Changed forwardingLength from 1 to 16 for all adapters. - - Fri Oct 12 16:45:00 EST 2001 - Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV) - - Wed Apr 25 12:00:00 PST 2002 (Keyspan) - Started with Hugh Blemings' code dated Jan 17, 2002. All adapters - now supported (including QI and QW). Modified port open, port - close, and send setup() logic to fix various data and endpoint - synchronization bugs and device LED status bugs. Changed keyspan_ - write_room() to accurately return transmit buffer availability. - Changed forwardingLength from 1 to 16 for all adapters. - - Fri Oct 12 16:45:00 EST 2001 - Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV) - - Mon Oct 8 14:29:00 EST 2001 hugh - Fixed bug that prevented mulitport devices operating correctly - if they weren't the first unit attached. - - Sat Oct 6 12:31:21 EST 2001 hugh - Added support for USA-28XA and -28XB, misc cleanups, break support - for usa26 based models thanks to David Gibson. - - Thu May 31 11:56:42 PDT 2001 gkh - switched from using spinlock to a semaphore - - (04/08/2001) gb - Identify version on module load. - - (11/01/2000) Adam J. Richter - usb_device_id table support. - - Tue Oct 10 23:15:33 EST 2000 Hugh - Merged Paul's changes with my USA-49W mods. Work in progress - still... - - Wed Jul 19 14:00:42 EST 2000 gkh - Added module_init and module_exit functions to handle the fact that - this driver is a loadable module now. - - Tue Jul 18 16:14:52 EST 2000 Hugh - Basic character input/output for USA-19 now mostly works, - fixed at 9600 baud for the moment. - - Sat Jul 8 11:11:48 EST 2000 Hugh - First public release - nothing works except the firmware upload. - Tested on PPC and x86 architectures, seems to behave... */ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index d5c0c6a..fde5537 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -12,59 +12,6 @@ * * See Documentation/usb/usb-serial.txt for more information on using this * driver - * - * (09/07/2001) gkh - * cleaned up the Xircom support. Added ids for Entregra device which is - * the same as the Xircom device. Enabled the code to be compiled for - * either Xircom or Keyspan devices. - * - * (08/11/2001) Cristian M. Craciunescu - * support for Xircom PGSDB9 - * - * (05/31/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of - * problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * - * (07/20/2000) borchers - * - keyspan_pda_write no longer sleeps if it is called on interrupt time; - * PPP and the line discipline with stty echo on can call write on - * interrupt time and this would cause an oops if write slept - * - if keyspan_pda_write is in an interrupt, it will not call - * usb_control_msg (which sleeps) to query the room in the device - * buffer, it simply uses the current room value it has - * - if the urb is busy or if it is throttled keyspan_pda_write just - * returns 0, rather than sleeping to wait for this to change; the - * write_chan code in n_tty.c will sleep if needed before calling - * keyspan_pda_write again - * - if the device needs to be unthrottled, write now queues up the - * call to usb_control_msg (which sleeps) to unthrottle the device - * - the wakeups from keyspan_pda_write_bulk_callback are queued rather - * than done directly from the callback to avoid the race in write_chan - * - keyspan_pda_chars_in_buffer also indicates its buffer is full if the - * urb status is -EINPROGRESS, meaning it cannot write at the moment - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index ddd1463..2ecfc01 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -20,18 +20,6 @@ * * Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus * (Adapter K), B1 Professional and KAAN Professional (Adapter B) - * - * (21/05/2004) tw - * Fix bug with P'n'P readers - * - * (28/05/2003) tw - * Add support for KAAN SIM - * - * (12/09/2002) tw - * Adapted to 2.5. - * - * (11/08/2002) tw - * Initial version. */ diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ba0d287..6804efe 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -19,50 +19,6 @@ * DTR/RTS signal handling may be incomplete or incorrect. I have mainly * implemented what I have seen with SniffUSB or found in belkin_sa.c. * For further TODOs check also belkin_sa.c. - * - * TEST STATUS: - * Basic tests have been performed with minicom/zmodem transfers and - * modem dialing under Linux 2.4.0-test10 (for me it works fine). - * - * 04-Nov-2003 Bill Marr - * - Mimic Windows driver by sending 2 USB 'device request' messages - * following normal 'baud rate change' message. This allows data to be - * transmitted to RS-232 devices which don't assert the 'CTS' signal. - * - * 10-Nov-2001 Wolfgang Grandegger - * - Fixed an endianess problem with the baudrate selection for PowerPC. - * - * 06-Dec-2001 Martin Hamilton - * - Added support for the Belkin F5U109 DB9 adaptor - * - * 30-May-2001 Greg Kroah-Hartman - * - switched from using spinlock to a semaphore, which fixes lots of - * problems. - * - * 04-May-2001 Stelian Pop - * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes - * instead of the device reported 32 (using 32 bytes causes many data - * loss, Windows driver uses 16 too). - * - * 02-May-2001 Stelian Pop - * - Fixed the baud calculation for Sitecom U232-P25 model - * - * 08-Apr-2001 gb - * - Identify version on module load. - * - * 06-Jan-2001 Cornel Ciocirlan - * - Added support for Sitecom U232-P25 model (Product Id 0x0230) - * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200) - * - * 29-Nov-2000 Greg Kroah-Hartman - * - Added device id table to fit with 2.4.0-test11 structure. - * - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed - * (lots of things will change if/when the usb-serial core changes to - * handle these issues. - * - * 27-Nov-2000 Wolfgang Grandegge - * A version for kernel 2.4.0-test10 released to the Linux community - * (via linux-usb-devel). */ #include diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 60f38d5..6d7c56d 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -9,31 +9,6 @@ * driver * * Please report both successes and troubles to the author at omninet@kroah.com - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of - * problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * Fixed potential race in omninet_write_bulk_callback - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * */ #include diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 5b073bc..7eb360b 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -14,57 +14,6 @@ * * See Documentation/usb/usb-serial.txt for more information on using this * driver - * - * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com) - * Upgrade to full working driver - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of - * problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * 2001_Mar_19 gkh - * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more - * than once, and the got the proper usb_device_id table entries so - * the driver works again. - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (10/03/2000) smd - * firmware is improved to guard against crap sent to device - * firmware now replies CMD_FAILURE on bad things - * read_callback fix you provided for private info struct - * command_finished now indicates success or fail - * setup_port struct now packed to avoid gcc padding - * firmware uses 1 based port numbering, driver now handles that - * - * (09/11/2000) gkh - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * Fixed bug with port->minor that was found by Al Borchers - * - * (07/04/2000) gkh - * Added support for port settings. Baud rate can now be changed. Line - * signals are not transferred to and from the tty layer yet, but things - * seem to be working well now. - * - * (05/04/2000) gkh - * First cut at open and close commands. Data can flow through the ports at - * default speeds now. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ #include -- 2.7.4