From 13a971046a23990a00419d031642a09605903caa Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Fri, 6 Mar 2020 16:50:51 +0800 Subject: [PATCH] dt-bindings: convert mtk-quadspi binding doc for spi-mtk-nor spi-mtk-nor is a driver to replace mtk-quadspi and they have almost the same device-tree bindings. Reuse this binding documentation and convert it for new driver: 1. "Mediatek SoCs" -> "Mediatek ARM SoCs" because MTK MIPS SoCs use different controllers. 2. document "interrupts" as a required property because it's available on all SoCs with this controller and new driver takes advantages of it. It's implemented as optional only to maintain backward compatibility. 3. add a dummy interrupt binding in example. Signed-off-by: Chuanhong Guo Link: https://lore.kernel.org/r/20200306085052.28258-4-gch981213@gmail.com Signed-off-by: Mark Brown --- .../bindings/{mtd/mtk-quadspi.txt => spi/spi-mtk-nor.txt} | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) rename Documentation/devicetree/bindings/{mtd/mtk-quadspi.txt => spi/spi-mtk-nor.txt} (75%) diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt similarity index 75% rename from Documentation/devicetree/bindings/mtd/mtk-quadspi.txt rename to Documentation/devicetree/bindings/spi/spi-mtk-nor.txt index a12e3b5..984ae7f 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MediaTek SoCs +* Serial NOR flash controller for MediaTek ARM SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -13,6 +13,7 @@ Required properties: "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register +- interrupts: Interrupt number used by the controller. - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks the clocks should be named "spi" and "sf". "spi" is used for spi bus, @@ -22,20 +23,16 @@ Required properties: - #address-cells: should be <1> - #size-cells: should be <0> -The SPI flash must be a child of the nor_flash node and must have a -compatible property. Also see jedec,spi-nor.txt. - -Required properties: -- compatible: May include a device-specific string consisting of the manufacturer - and name of the chip. Must also include "jedec,spi-nor" for any - SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). -- reg : Chip-Select number +There should be only one spi slave device following generic spi bindings. +It's not recommended to use this controller for devices other than SPI NOR +flash due to limited transfer capability of this controller. Example: nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + interrupts = <&spi_flash_irq>; clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; clock-names = "spi", "sf"; -- 2.7.4