From 13265568a8633ab0d22e9def8cd9b8b0edb3ca85 Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Thu, 3 Nov 2022 16:05:10 +0800 Subject: [PATCH] net: hinic: Add control command support for VF PMD driver in DPDK HINIC has a mailbox for PF-VF communication and the VF driver could send port control command to PF driver via mailbox. The control command only can be set to register in PF, so add support in PF driver for VF PMD driver control command when VF PMD driver work with linux PF driver. Then, no need to add handlers to nic_vf_cmd_msg_handler[], because the host driver just forwards it to the firmware. Actually the firmware works on a coprocessor MGMT_CPU(inside the NIC) which will recv and deal with these commands. Signed-off-by: Cai Huoqing Signed-off-by: David S. Miller --- drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h | 66 ++++++++++++++++++++++++ drivers/net/ethernet/huawei/hinic/hinic_sriov.c | 18 +++++++ 2 files changed, 84 insertions(+) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h index 6dae116..6b5797e 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h @@ -51,6 +51,9 @@ enum hinic_port_cmd { HINIC_PORT_CMD_ADD_VLAN = 0x3, HINIC_PORT_CMD_DEL_VLAN = 0x4, + HINIC_PORT_CMD_SET_ETS = 0x7, + HINIC_PORT_CMD_GET_ETS = 0x8, + HINIC_PORT_CMD_SET_PFC = 0x5, HINIC_PORT_CMD_SET_MAC = 0x9, @@ -59,6 +62,8 @@ enum hinic_port_cmd { HINIC_PORT_CMD_SET_RX_MODE = 0xC, + HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE = 0xD, + HINIC_PORT_CMD_GET_PAUSE_INFO = 0x14, HINIC_PORT_CMD_SET_PAUSE_INFO = 0x15, @@ -81,6 +86,7 @@ enum hinic_port_cmd { HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 0x25, HINIC_PORT_CMD_SET_PORT_STATE = 0x29, + HINIC_PORT_CMD_GET_PORT_STATE = 0x30, HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 0x2B, @@ -100,17 +106,29 @@ enum hinic_port_cmd { HINIC_PORT_CMD_RSS_CFG = 0x42, + HINIC_PORT_CMD_GET_PHY_TYPE = 0x44, + HINIC_PORT_CMD_FWCTXT_INIT = 0x45, HINIC_PORT_CMD_GET_LOOPBACK_MODE = 0x48, HINIC_PORT_CMD_SET_LOOPBACK_MODE = 0x49, + HINIC_PORT_CMD_GET_JUMBO_FRAME_SIZE = 0x4A, + HINIC_PORT_CMD_SET_JUMBO_FRAME_SIZE = 0x4B, + HINIC_PORT_CMD_ENABLE_SPOOFCHK = 0x4E, HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58, + HINIC_PORT_CMD_GET_PORT_TYPE = 0x5B, + HINIC_PORT_CMD_SET_FUNC_STATE = 0x5D, + HINIC_PORT_CMD_GET_PORT_ID_BY_FUNC_ID = 0x5E, + + HINIC_PORT_CMD_GET_DMA_CS = 0x64, + HINIC_PORT_CMD_SET_DMA_CS = 0x65, + HINIC_PORT_CMD_GET_GLOBAL_QPN = 0x66, HINIC_PORT_CMD_SET_VF_RATE = 0x69, @@ -125,25 +143,73 @@ enum hinic_port_cmd { HINIC_PORT_CMD_SET_RQ_IQ_MAP = 0x73, + HINIC_PORT_CMD_SET_PFC_THD = 0x75, + HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xA0, + HINIC_PORT_CMD_SET_LOSSLESS_ETH = 0xA3, + HINIC_PORT_CMD_UPDATE_MAC = 0xA4, HINIC_PORT_CMD_GET_CAP = 0xAA, + HINIC_PORT_CMD_UP_TC_ADD_FLOW = 0xAF, + HINIC_PORT_CMD_UP_TC_DEL_FLOW = 0xB0, + HINIC_PORT_CMD_UP_TC_GET_FLOW = 0xB1, + + HINIC_PORT_CMD_UP_TC_FLUSH_TCAM = 0xB2, + + HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK = 0xB3, + + HINIC_PORT_CMD_UP_TC_ENABLE = 0xB4, + + HINIC_PORT_CMD_UP_TC_GET_TCAM_BLOCK = 0xB5, + + HINIC_PORT_CMD_SET_IPSU_MAC = 0xCB, + HINIC_PORT_CMD_GET_IPSU_MAC = 0xCC, + + HINIC_PORT_CMD_SET_XSFP_STATUS = 0xD4, + HINIC_PORT_CMD_GET_LINK_MODE = 0xD9, HINIC_PORT_CMD_SET_SPEED = 0xDA, HINIC_PORT_CMD_SET_AUTONEG = 0xDB, + HINIC_PORT_CMD_CLEAR_QP_RES = 0xDD, + + HINIC_PORT_CMD_SET_SUPER_CQE = 0xDE, + + HINIC_PORT_CMD_SET_VF_COS = 0xDF, + HINIC_PORT_CMD_GET_VF_COS = 0xE1, + + HINIC_PORT_CMD_CABLE_PLUG_EVENT = 0xE5, + + HINIC_PORT_CMD_LINK_ERR_EVENT = 0xE6, + + HINIC_PORT_CMD_SET_COS_UP_MAP = 0xE8, + + HINIC_PORT_CMD_RESET_LINK_CFG = 0xEB, + HINIC_PORT_CMD_GET_STD_SFP_INFO = 0xF0, + HINIC_PORT_CMD_FORCE_PKT_DROP = 0xF3, + HINIC_PORT_CMD_SET_LRO_TIMER = 0xF4, + HINIC_PORT_CMD_SET_VHD_CFG = 0xF7, + + HINIC_PORT_CMD_SET_LINK_FOLLOW = 0xF8, + HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9, HINIC_PORT_CMD_GET_SFP_ABS = 0xFB, + + HINIC_PORT_CMD_Q_FILTER = 0xFC, + + HINIC_PORT_CMD_TCAM_FILTER = 0xFE, + + HINIC_PORT_CMD_SET_VLAN_FILTER = 0xFF, }; /* cmd of mgmt CPU message for HILINK module */ diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c index f7e05b4..ee35708 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c @@ -489,6 +489,24 @@ static struct vf_cmd_check_handle nic_cmd_support_vf[] = { {HINIC_PORT_CMD_UPDATE_MAC, hinic_mbox_check_func_id_8B}, {HINIC_PORT_CMD_GET_CAP, hinic_mbox_check_func_id_8B}, {HINIC_PORT_CMD_GET_LINK_MODE, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_GET_VF_COS, NULL}, + {HINIC_PORT_CMD_SET_VHD_CFG, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_SET_VLAN_FILTER, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_Q_FILTER, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_TCAM_FILTER, NULL}, + {HINIC_PORT_CMD_UP_TC_ADD_FLOW, NULL}, + {HINIC_PORT_CMD_UP_TC_DEL_FLOW, NULL}, + {HINIC_PORT_CMD_UP_TC_FLUSH_TCAM, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_UP_TC_ENABLE, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_CABLE_PLUG_EVENT, NULL}, + {HINIC_PORT_CMD_LINK_ERR_EVENT, NULL}, + {HINIC_PORT_CMD_SET_PORT_STATE, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_SET_ETS, NULL}, + {HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE, NULL}, + {HINIC_PORT_CMD_RESET_LINK_CFG, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_SET_LINK_FOLLOW, NULL}, + {HINIC_PORT_CMD_CLEAR_QP_RES, NULL}, }; #define CHECK_IPSU_15BIT 0X8000 -- 2.7.4