From 1325a6c91a880e3aacb7a0acc3dfba3840361653 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Mon, 5 Mar 2018 11:25:58 +0800 Subject: [PATCH] clk: rockchip: Prevent calculating mmc phase if clock rate is zero [ Upstream commit 4bf59902b50012b1dddeeaa23b217d9c4956cdda ] The MMC sample and drv clock for rockchip platforms are derived from the bus clock output to the MMC/SDIO card. So it should never happens that the clk rate is zero given it should inherits the clock rate from its parent. If something goes wrong and makes the clock rate to be zero, the calculation would be wrong but may still make the mmc tuning process work luckily. However it makes people harder to debug when the following data transfer is unstable. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/clk/rockchip/clk-mmc-phase.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index 077fcdc..fe7d9ed 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -58,6 +58,12 @@ static int rockchip_mmc_get_phase(struct clk_hw *hw) u16 degrees; u32 delay_num = 0; + /* See the comment for rockchip_mmc_set_phase below */ + if (!rate) { + pr_err("%s: invalid clk rate\n", __func__); + return -EINVAL; + } + raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift); degrees = (raw_value & ROCKCHIP_MMC_DEGREE_MASK) * 90; @@ -84,6 +90,23 @@ static int rockchip_mmc_set_phase(struct clk_hw *hw, int degrees) u32 raw_value; u32 delay; + /* + * The below calculation is based on the output clock from + * MMC host to the card, which expects the phase clock inherits + * the clock rate from its parent, namely the output clock + * provider of MMC host. However, things may go wrong if + * (1) It is orphan. + * (2) It is assigned to the wrong parent. + * + * This check help debug the case (1), which seems to be the + * most likely problem we often face and which makes it difficult + * for people to debug unstable mmc tuning results. + */ + if (!rate) { + pr_err("%s: invalid clk rate\n", __func__); + return -EINVAL; + } + nineties = degrees / 90; remainder = (degrees % 90); -- 2.7.4