From 12fb0eb4c963452f727752aae03bbef192abed40 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 27 Jul 2010 11:26:02 +0000 Subject: [PATCH] powerpc/5121: add initial support for PDM360NG board Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer Signed-off-by: Wolfgang Grandegger Signed-off-by: Michael Weiss Signed-off-by: Detlev Zundel Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/pdm360ng.dts | 410 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/512x/Kconfig | 7 + arch/powerpc/platforms/512x/Makefile | 1 + arch/powerpc/platforms/512x/pdm360ng.c | 129 +++++++++++ 4 files changed, 547 insertions(+) create mode 100644 arch/powerpc/boot/dts/pdm360ng.dts create mode 100644 arch/powerpc/platforms/512x/pdm360ng.c diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts new file mode 100644 index 0000000..94dfa5c --- /dev/null +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -0,0 +1,410 @@ +/* + * Device Tree Source for IFM PDM360NG. + * + * Copyright 2009 - 2010 DENX Software Engineering. + * Anatolij Gustschin + * + * Based on MPC5121E ADS dts. + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "pdm360ng"; + compatible = "ifm,pdm360ng"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5121@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; + interrupts = <0x6 0x8>; + #address-cells = <0x1>; + #size-cells = <0x1>; + bank-width = <0x1>; + chips = <0x1>; + + partition@0 { + label = "nand0"; + reg = <0x0 0x40000000>; + }; + }; + + sram@50000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x50000000 0x20000>; // 128K at 0x50000000 + }; + + localbus@80000020 { + compatible = "fsl,mpc5121-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x80000020 0x40>; + + ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ + 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ + + flash@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + reg = <0 0x00000000 0x08000000 + 0 0x08000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "environment"; + reg = <0x00080000 0x00080000>; + read-only; + }; + partition@100000 { + label = "splash-image"; + reg = <0x00100000 0x00080000>; + read-only; + }; + partition@180000 { + label = "device-tree"; + reg = <0x00180000 0x00040000>; + }; + partition@1c0000 { + label = "kernel"; + reg = <0x001c0000 0x00500000>; + }; + partition@6c0000 { + label = "filesystem"; + reg = <0x006c0000 0x07940000>; + }; + }; + + mram0@2,0 { + compatible = "mtd-ram"; + reg = <2 0x00000 0x10000>; + bank-width = <2>; + }; + + mram1@2,10000 { + compatible = "mtd-ram"; + reg = <2 0x010000 0x10000>; + bank-width = <2>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ //Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + }; + + can@1300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + fsl,preserve-clocking; + + eeprom@50 { + compatible = "at,24c01"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + fsl,preserve-clocking; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + }; + + can@2300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <90 0x8>; + reg = <0x2300 0x80>; + }; + + can@2380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <91 0x8>; + reg = <0x2380 0x80>; + }; + + viu@2400 { + compatible = "fsl,mpc5121-viu"; + reg = <0x2400 0x400>; + interrupts = <67 0x8>; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x200>; + #address-cells = <1>; + #size-cells = <0>; + phy: ethernet-phy@0 { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy >; + }; + + // USB1 using external ULPI PHY + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + // USB0 using internal UTMI PHY + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + fsl,invert-pwr-fault; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + // 512x PSCs are not 52xx PSCs compatible + serial@11000 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <0>; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11100 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <1>; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11200 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <2>; + reg = <0x11200 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <3>; + reg = <0x11300 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <4>; + reg = <0x11400 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11600 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <6>; + reg = <0x11600 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <8>; + reg = <0x11800 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11B00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <11>; + reg = <0x11B00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + }; + + spi@11900 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + cell-index = <9>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + + // 7845 touch screen controller + ts@0 { + compatible = "ti,ads7846"; + reg = <0x0>; + spi-max-frequency = <3000000>; + // pen irq is GPIO25 + interrupts = <78 0x8>; + }; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; +}; diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index e9dca28..27b0651 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -25,3 +25,10 @@ config MPC5121_GENERIC Compatible boards include: Protonic LVT base boards (ZANMCU and VICVT2). + +config PDM360NG + bool "ifm PDM360NG board" + depends on PPC_MPC512x + select DEFAULT_UIMAGE + help + This option enables support for the PDM360NG board. diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 90be2f5..4efc1c4 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -4,3 +4,4 @@ obj-y += clock.o mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o +obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c new file mode 100644 index 0000000..0575e85 --- /dev/null +++ b/arch/powerpc/platforms/512x/pdm360ng.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 DENX Software Engineering + * + * Anatolij Gustschin, + * + * PDM360NG board setup + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include +#include + +#include "mpc512x.h" + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include +#include +#include +#include + +static void *pdm360ng_gpio_base; + +static int pdm360ng_get_pendown_state(void) +{ + u32 reg; + + reg = in_be32(pdm360ng_gpio_base + 0xc); + if (reg & 0x40) + setbits32(pdm360ng_gpio_base + 0xc, 0x40); + + reg = in_be32(pdm360ng_gpio_base + 0x8); + + /* return 1 if pen is down */ + return (reg & 0x40) == 0; +} + +static struct ads7846_platform_data pdm360ng_ads7846_pdata = { + .model = 7845, + .get_pendown_state = pdm360ng_get_pendown_state, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static int __init pdm360ng_penirq_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio"); + if (!np) { + pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); + return -ENODEV; + } + + pdm360ng_gpio_base = of_iomap(np, 0); + of_node_put(np); + if (!pdm360ng_gpio_base) { + pr_err("%s: Can't map gpio regs.\n", __func__); + return -ENODEV; + } + out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff); + setbits32(pdm360ng_gpio_base + 0x18, 0x2000); + setbits32(pdm360ng_gpio_base + 0x10, 0x40); + + return 0; +} + +static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb, + unsigned long event, void *__dev) +{ + struct device *dev = __dev; + + if ((event == BUS_NOTIFY_ADD_DEVICE) && + of_device_is_compatible(dev->of_node, "ti,ads7846")) { + dev->platform_data = &pdm360ng_ads7846_pdata; + return NOTIFY_OK; + } + return NOTIFY_DONE; +} + +static struct notifier_block pdm360ng_touchscreen_nb = { + .notifier_call = pdm360ng_touchscreen_notifier_call, +}; + +static void __init pdm360ng_touchscreen_init(void) +{ + if (pdm360ng_penirq_init()) + return; + + bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb); +} +#else +static inline void __init pdm360ng_touchscreen_init(void) +{ +} +#endif /* CONFIG_TOUCHSCREEN_ADS7846 */ + +void __init pdm360ng_init(void) +{ + mpc512x_init(); + pdm360ng_touchscreen_init(); +} + +static int __init pdm360ng_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ifm,pdm360ng"); +} + +define_machine(pdm360ng) { + .name = "PDM360NG", + .probe = pdm360ng_probe, + .setup_arch = mpc512x_setup_diu, + .init = pdm360ng_init, + .init_early = mpc512x_init_diu, + .init_IRQ = mpc512x_init_IRQ, + .get_irq = ipic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = mpc512x_restart, +}; -- 2.7.4