From 1268d8339ca46e3a5c642b38baa1512a19378af4 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 29 Mar 2019 13:13:10 -0500 Subject: [PATCH] ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name The correct DT property for specifying a GPIO used for reset is "reset-gpios", the driver now accepts this name, use it here. Note the GPIO polarity in the driver was ignored before and always assumed to be active low, when all the DTs are fixed we will start respecting the specified polarity. Switch polarity in DT to the currently assumed one, this way when the driver changes the behavior will not change. Signed-off-by: Andrew F. Davis Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 9f66489..7fa989e 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -385,7 +385,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; accel@1c { @@ -578,7 +578,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; touchscreen@20 { -- 2.7.4