From 115f459a53b0c56a699a76b34b82507452eb3df5 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 12 Nov 2009 18:37:00 +0000 Subject: [PATCH] igb: move timesync init into a seperate function Current code is quite large and making igb_probe difficult to read. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 115 +++++++++++++++++++++++++-------------------- 1 file changed, 65 insertions(+), 50 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b044c98..d72d484 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1566,56 +1566,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, } #endif - switch (hw->mac.type) { - case e1000_82576: - /* - * Initialize hardware timer: we keep it running just in case - * that some program needs it later on. - */ - memset(&adapter->cycles, 0, sizeof(adapter->cycles)); - adapter->cycles.read = igb_read_clock; - adapter->cycles.mask = CLOCKSOURCE_MASK(64); - adapter->cycles.mult = 1; - /** - * Scale the NIC clock cycle by a large factor so that - * relatively small clock corrections can be added or - * substracted at each clock tick. The drawbacks of a large - * factor are a) that the clock register overflows more quickly - * (not such a big deal) and b) that the increment per tick has - * to fit into 24 bits. As a result we need to use a shift of - * 19 so we can fit a value of 16 into the TIMINCA register. - */ - adapter->cycles.shift = IGB_82576_TSYNC_SHIFT; - wr32(E1000_TIMINCA, - (1 << E1000_TIMINCA_16NS_SHIFT) | - (16 << IGB_82576_TSYNC_SHIFT)); - - /* Set registers so that rollover occurs soon to test this. */ - wr32(E1000_SYSTIML, 0x00000000); - wr32(E1000_SYSTIMH, 0xFF800000); - wrfl(); - - timecounter_init(&adapter->clock, - &adapter->cycles, - ktime_to_ns(ktime_get_real())); - /* - * Synchronize our NIC clock against system wall clock. NIC - * time stamp reading requires ~3us per sample, each sample - * was pretty stable even under load => only require 10 - * samples for each offset comparison. - */ - memset(&adapter->compare, 0, sizeof(adapter->compare)); - adapter->compare.source = &adapter->clock; - adapter->compare.target = ktime_get_real; - adapter->compare.num_samples = 10; - timecompare_update(&adapter->compare, 0); - break; - case e1000_82575: - /* 82575 does not support timesync */ - default: - break; - } - dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n"); /* print bus type/speed/width info */ dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n", @@ -1781,6 +1731,70 @@ static void __devinit igb_probe_vfs(struct igb_adapter * adapter) #endif /* CONFIG_PCI_IOV */ } + +/** + * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp + * @adapter: board private structure to initialize + * + * igb_init_hw_timer initializes the function pointer and values for the hw + * timer found in hardware. + **/ +static void igb_init_hw_timer(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + switch (hw->mac.type) { + case e1000_82576: + /* + * Initialize hardware timer: we keep it running just in case + * that some program needs it later on. + */ + memset(&adapter->cycles, 0, sizeof(adapter->cycles)); + adapter->cycles.read = igb_read_clock; + adapter->cycles.mask = CLOCKSOURCE_MASK(64); + adapter->cycles.mult = 1; + /** + * Scale the NIC clock cycle by a large factor so that + * relatively small clock corrections can be added or + * substracted at each clock tick. The drawbacks of a large + * factor are a) that the clock register overflows more quickly + * (not such a big deal) and b) that the increment per tick has + * to fit into 24 bits. As a result we need to use a shift of + * 19 so we can fit a value of 16 into the TIMINCA register. + */ + adapter->cycles.shift = IGB_82576_TSYNC_SHIFT; + wr32(E1000_TIMINCA, + (1 << E1000_TIMINCA_16NS_SHIFT) | + (16 << IGB_82576_TSYNC_SHIFT)); + + /* Set registers so that rollover occurs soon to test this. */ + wr32(E1000_SYSTIML, 0x00000000); + wr32(E1000_SYSTIMH, 0xFF800000); + wrfl(); + + timecounter_init(&adapter->clock, + &adapter->cycles, + ktime_to_ns(ktime_get_real())); + /* + * Synchronize our NIC clock against system wall clock. NIC + * time stamp reading requires ~3us per sample, each sample + * was pretty stable even under load => only require 10 + * samples for each offset comparison. + */ + memset(&adapter->compare, 0, sizeof(adapter->compare)); + adapter->compare.source = &adapter->clock; + adapter->compare.target = ktime_get_real; + adapter->compare.num_samples = 10; + timecompare_update(&adapter->compare, 0); + break; + case e1000_82575: + /* 82575 does not support timesync */ + default: + break; + } + +} + /** * igb_sw_init - Initialize general software structures (struct igb_adapter) * @adapter: board private structure to initialize @@ -1816,6 +1830,7 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter) return -ENOMEM; } + igb_init_hw_timer(adapter); igb_probe_vfs(adapter); /* Explicitly disable IRQ since the NIC can be in any state. */ -- 2.7.4