From 0ef02619ef01ad7e33805e9f9213cd289e2da0fc Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 31 Mar 2022 11:43:06 +0200 Subject: [PATCH] net: phy: marvell: Support reg config via "marvell, reg-init" DT property MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This patch adds support for the "marvell,reg-init" DT property, which is used to describe board specific Marvell PHY register configurations in the board dts file. This DT property is supported in the Linux Kernel since a longer time. Adding it to U-Boot now, enables the boards which describe the register settings in their DT files here as well. I've included calling this marvell_of_reg_init() to all foo_config() functions in this patch as well. If CONFIG_DM_ETH is not set, there is no ofnode, or no "marvell,reg-init" property, the PHY initialization is unchanged. The function marvell_of_reg_init() is a port of the Linux version. Please note that I explicitly did not add error checking and handling to the U-Boot version, as this is basically not done for phy_read/write in this Marvell PHY code. This will be used by the upcoming ethernet support on the MIPS Octeon EBB 7304 board. Signed-off-by: Stefan Roese Cc: Ramon Fried Cc: Joe Hershberger Cc: Aaron Williams Cc: Chandrakala Chavva Cc: Marek Behún Reviewed-by: Marek Behún --- drivers/net/phy/marvell.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index a62c695..1dcb79d 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -104,6 +104,88 @@ #define MIIM_88E151x_MODE_SGMII 1 #define MIIM_88E151x_RESET_OFFS 15 +#if IS_ENABLED(CONFIG_DM_ETH) +static int marvell_read_page(struct phy_device *phydev) +{ + return phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE); +} + +static int marvell_write_page(struct phy_device *phydev, int page) +{ + return phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, page); +} + +/* Set and/or override some configuration registers based on the + * marvell,reg-init property stored in the of_node for the phydev. + * + * marvell,reg-init = ,...; + * + * There may be one or more sets of : + * + * reg-page: which register bank to use. + * reg: the register. + * mask: if non-zero, ANDed with existing register value. + * value: ORed with the masked value and written to the regiser. + * + */ +static int marvell_of_reg_init(struct phy_device *phydev) +{ + const __be32 *prop; + int len, i, saved_page, current_page, ret = 0; + + if (!ofnode_valid(phydev->node)) + return 0; + + prop = ofnode_get_property(phydev->node, "marvell,reg-init", &len); + if (!prop) + return 0; + + saved_page = marvell_read_page(phydev); + if (saved_page < 0) + goto err; + current_page = saved_page; + + len /= sizeof(*prop); + for (i = 0; i < len - 3; i += 4) { + u16 page = be32_to_cpup(prop + i); + u16 reg = be32_to_cpup(prop + i + 1); + u16 mask = be32_to_cpup(prop + i + 2); + u16 val_bits = be32_to_cpup(prop + i + 3); + int val; + + if (page != current_page) { + current_page = page; + ret = marvell_write_page(phydev, page); + if (ret < 0) + goto err; + } + + val = 0; + if (mask) { + val = phy_read(phydev, MDIO_DEVAD_NONE, reg); + if (val < 0) { + ret = val; + goto err; + } + val &= mask; + } + val |= val_bits; + + ret = phy_write(phydev, MDIO_DEVAD_NONE, reg, val); + if (ret < 0) + goto err; + } + +err: + return marvell_write_page(phydev, saved_page); +} +#else +static int marvell_of_reg_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_DM_ETH */ + static int m88e1xxx_phy_extread(struct phy_device *phydev, int addr, int devaddr, int regnum) { @@ -143,6 +225,8 @@ static int m88e1011s_config(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); + marvell_of_reg_init(phydev); + genphy_config_aneg(phydev); return 0; @@ -298,6 +382,8 @@ static int m88e1111s_config(struct phy_device *phydev) /* soft reset */ phy_reset(phydev); + marvell_of_reg_init(phydev); + genphy_config_aneg(phydev); genphy_restart_aneg(phydev); @@ -397,6 +483,8 @@ static int m88e151x_config(struct phy_device *phydev) /* soft reset */ phy_reset(phydev); + marvell_of_reg_init(phydev); + genphy_config_aneg(phydev); genphy_restart_aneg(phydev); @@ -417,6 +505,8 @@ static int m88e1118_config(struct phy_device *phydev) /* Change Page Number */ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); + marvell_of_reg_init(phydev); + return genphy_config_aneg(phydev); } @@ -439,6 +529,8 @@ static int m88e1121_config(struct phy_device *phydev) { int pg; + marvell_of_reg_init(phydev); + /* Configure the PHY */ genphy_config_aneg(phydev); @@ -479,6 +571,8 @@ static int m88e1145_config(struct phy_device *phydev) MIIM_M88E1145_RGMII_TX_DELAY; phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg); + marvell_of_reg_init(phydev); + genphy_config_aneg(phydev); /* soft reset */ @@ -511,6 +605,8 @@ static int m88e1149_config(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0); phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + marvell_of_reg_init(phydev); + genphy_config_aneg(phydev); phy_reset(phydev); @@ -544,6 +640,8 @@ static int m88e1310_config(struct phy_device *phydev) /* Ensure to return to page 0 */ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0000); + marvell_of_reg_init(phydev); + return genphy_config_aneg(phydev); } @@ -578,6 +676,8 @@ static int m88e1680_config(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x9140); + marvell_of_reg_init(phydev); + res = genphy_config_aneg(phydev); if (res < 0) return res; -- 2.7.4