From 0edc9a6709d8e7d4f26c7f2a4b5ebdb641f8dfa0 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Mon, 12 Apr 2010 16:38:47 +0900 Subject: [PATCH] ath5k: Use high bitrates for ACK/CTS There was a confusion in the usage of the bits AR5K_STA_ID1_ACKCTS_6MB and AR5K_STA_ID1_BASE_RATE_11B. If they are set (1), we will get lower bitrates for ACK and CTS. Therefore ath5k_hw_set_ack_bitrate_high(ah, false) actually resulted in high bitrates, which i think is what we want anyways. Cleared the confusion and added some documentation. Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 3 +-- drivers/net/wireless/ath/ath5k/pcu.c | 4 ++-- drivers/net/wireless/ath/ath5k/reg.h | 4 ++-- 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index f7f57c1..3f59bc2 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2558,8 +2558,7 @@ ath5k_init(struct ath5k_softc *sc) for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) ath5k_hw_reset_key(ah, i); - /* Set ack to be sent at low bit-rates */ - ath5k_hw_set_ack_bitrate_high(ah, false); + ath5k_hw_set_ack_bitrate_high(ah, true); ret = 0; done: mmiowb(); diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 710870e..174412f 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -154,9 +154,9 @@ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) else { u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; if (high) - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); - else AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); } } diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index 45d62e9..55b4ac6d 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -1139,8 +1139,8 @@ #define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ #define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ #define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ -#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ -#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */ +#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Rate to use for ACK/CTS. 0: highest mandatory rate <= RX rate; 1: 1Mbps in B mode */ +#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* 802.11b base rate. 0: 1, 2, 5.5 and 11Mbps; 1: 1 and 2Mbps. [5211+] */ #define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ #define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ #define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ -- 2.7.4