From 0c1b7de4f33f64665c45a15980a02582740034ff Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Wed, 21 Sep 2016 20:21:52 -0400 Subject: [PATCH] ixgbe: Add X552 iXFI configuration helper function X553 doesn't need all the initialization that X552 did for iXFI. This patch will allow native SPI SFP+ to work with X553 devices. Future patches will add additional configuration as needed. Signed-off-by: Don Skidmore Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 86 ++++++++++++++++----------- 1 file changed, 52 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 7e6b926..3e3458e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1128,47 +1128,17 @@ out: return ret; } -/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. +/** + * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration * @hw: pointer to hardware structure - * @speed: the link speed to force * - * Configures the integrated KR PHY to use iXFI mode. Used to connect an - * internal and external PHY at a specific speed, without autonegotiation. + * iXfI configuration needed for ixgbe_mac_X550EM_x devices. **/ -static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) { s32 status; u32 reg_val; - /* Disable AN and force speed to 10G Serial. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status) - return status; - - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; - - /* Select forced link speed for internal PHY. */ - switch (*speed) { - case IXGBE_LINK_SPEED_10GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; - break; - case IXGBE_LINK_SPEED_1GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; - break; - default: - /* Other link speeds are not supported by internal KR PHY. */ - return IXGBE_ERR_LINK_SETUP; - } - - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status) - return status; - /* Disable training protocol FSM. */ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), @@ -1228,9 +1198,57 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + return status; +} + +/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated KR PHY to use iXFI mode. Used to connect an + * internal and external PHY at a specific speed, without autonegotiation. + **/ +static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + s32 status; + u32 reg_val; + + /* Disable AN and force speed to 10G Serial. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal KR PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status) return status; + /* Additional configuration needed for x550em_x */ + if (hw->mac.type == ixgbe_mac_X550EM_x) { + status = ixgbe_setup_ixfi_x550em_x(hw); + if (status) + return status; + } + /* Toggle port SW reset by AN reset. */ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), -- 2.7.4