From 0c0ef67ed8043b77b2015410c97ee5ca82a8ab28 Mon Sep 17 00:00:00 2001 From: Danilo Krummrich Date: Tue, 15 Feb 2022 14:55:44 -0800 Subject: [PATCH] Input: ps2-gpio - enforce GPIOs flag open drain The PS/2 bus defines the data and clock line be open drain, therefore for both enforce the particular GPIO flags in the driver. Without enforcing to flag at least the clock gpio as open drain we run into the following warning: WARNING: CPU: 1 PID: 40 at drivers/gpio/gpiolib.c:3175 gpiochip_enable_irq+0x54/0x90 gpiochip_enable_irq() warns on a GPIO being configured as output while serving as IRQ source without being flagged as open drain. Signed-off-by: Danilo Krummrich Link: https://lore.kernel.org/r/20220215180829.63543-4-danilokrummrich@dk-develop.de Signed-off-by: Dmitry Torokhov --- drivers/input/serio/ps2-gpio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c index a1e5f3b..9b02dd5d 100644 --- a/drivers/input/serio/ps2-gpio.c +++ b/drivers/input/serio/ps2-gpio.c @@ -372,14 +372,19 @@ static irqreturn_t ps2_gpio_irq(int irq, void *dev_id) static int ps2_gpio_get_props(struct device *dev, struct ps2_gpio_data *drvdata) { - drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN); + enum gpiod_flags gflags; + + /* Enforce open drain, since this is required by the PS/2 bus. */ + gflags = GPIOD_IN | GPIOD_FLAGS_BIT_OPEN_DRAIN; + + drvdata->gpio_data = devm_gpiod_get(dev, "data", gflags); if (IS_ERR(drvdata->gpio_data)) { dev_err(dev, "failed to request data gpio: %ld", PTR_ERR(drvdata->gpio_data)); return PTR_ERR(drvdata->gpio_data); } - drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN); + drvdata->gpio_clk = devm_gpiod_get(dev, "clk", gflags); if (IS_ERR(drvdata->gpio_clk)) { dev_err(dev, "failed to request clock gpio: %ld", PTR_ERR(drvdata->gpio_clk)); -- 2.7.4