From 0a0b7a5f7a043d86a95990d3227cf7e823ae52ac Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 11 Jan 2011 04:34:28 +0000 Subject: [PATCH] can: add driver for Softing card This patch adds the driver that creates a platform:softing device from a pcmcia_device Note: the Kconfig indicates a dependency on the softing.ko driver, but this is purely to make configuration intuitive. This driver will work independent, but no CAN network devices appear until softing.ko is loaded too. Signed-off-by: Kurt Van Dijck Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/softing/Kconfig | 14 ++ drivers/net/can/softing/Makefile | 1 + drivers/net/can/softing/softing_cs.c | 359 +++++++++++++++++++++++++++++++++++ 3 files changed, 374 insertions(+) create mode 100644 drivers/net/can/softing/softing_cs.c diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 072f337..92bd6bd 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -14,3 +14,17 @@ config CAN_SOFTING controls the 2 busses on the card together. As such, some actions (start/stop/busoff recovery) on 1 bus must bring down the other bus too temporarily. + +config CAN_SOFTING_CS + tristate "Softing Gmbh CAN pcmcia cards" + depends on PCMCIA + select CAN_SOFTING + ---help--- + Support for PCMCIA cards from Softing Gmbh & some cards + from Vector Gmbh. + You need firmware for these, which you can get at + http://developer.berlios.de/projects/socketcan/ + This version of the driver is written against + firmware version 4.6 (softing-fw-4.6-binaries.tar.gz) + In order to use the card as CAN device, you need the Softing generic + support too. diff --git a/drivers/net/can/softing/Makefile b/drivers/net/can/softing/Makefile index 7db0445..c5e5016 100644 --- a/drivers/net/can/softing/Makefile +++ b/drivers/net/can/softing/Makefile @@ -1,5 +1,6 @@ softing-y := softing_main.o softing_fw.o obj-$(CONFIG_CAN_SOFTING) += softing.o +obj-$(CONFIG_CAN_SOFTING_CS) += softing_cs.o ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/softing/softing_cs.c b/drivers/net/can/softing/softing_cs.c new file mode 100644 index 0000000..300fe75 --- /dev/null +++ b/drivers/net/can/softing/softing_cs.c @@ -0,0 +1,359 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +#include "softing_platform.h" + +static int softingcs_index; +static spinlock_t softingcs_index_lock; + +static int softingcs_reset(struct platform_device *pdev, int v); +static int softingcs_enable_irq(struct platform_device *pdev, int v); + +/* + * platform_data descriptions + */ +#define MHZ (1000*1000) +static const struct softing_platform_data softingcs_platform_data[] = { +{ + .name = "CANcard", + .manf = 0x0168, .prod = 0x001, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-NEC", + .manf = 0x0168, .prod = 0x002, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-SJA", + .manf = 0x0168, .prod = 0x004, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-2", + .manf = 0x0168, .prod = 0x005, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "Vector-CANcard", + .manf = 0x0168, .prod = 0x081, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-SJA", + .manf = 0x0168, .prod = 0x084, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-2", + .manf = 0x0168, .prod = 0x085, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "EDICcard-NEC", + .manf = 0x0168, .prod = 0x102, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "EDICcard-2", + .manf = 0x0168, .prod = 0x105, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + 0, 0, +}, +}; + +MODULE_FIRMWARE(fw_dir "bcard.bin"); +MODULE_FIRMWARE(fw_dir "ldcard.bin"); +MODULE_FIRMWARE(fw_dir "cancard.bin"); +MODULE_FIRMWARE(fw_dir "cansja.bin"); + +MODULE_FIRMWARE(fw_dir "bcard2.bin"); +MODULE_FIRMWARE(fw_dir "ldcard2.bin"); +MODULE_FIRMWARE(fw_dir "cancrd2.bin"); + +static __devinit const struct softing_platform_data +*softingcs_find_platform_data(unsigned int manf, unsigned int prod) +{ + const struct softing_platform_data *lp; + + for (lp = softingcs_platform_data; lp->manf; ++lp) { + if ((lp->manf == manf) && (lp->prod == prod)) + return lp; + } + return NULL; +} + +/* + * platformdata callbacks + */ +static int softingcs_reset(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [2] %02x\n", v ? 0 : 0x20); + return pcmcia_write_config_byte(pcmcia, 2, v ? 0 : 0x20); +} + +static int softingcs_enable_irq(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [0] %02x\n", v ? 0x60 : 0); + return pcmcia_write_config_byte(pcmcia, 0, v ? 0x60 : 0); +} + +/* + * pcmcia check + */ +static __devinit int softingcs_probe_config(struct pcmcia_device *pcmcia, + void *priv_data) +{ + struct softing_platform_data *pdat = priv_data; + struct resource *pres; + int memspeed = 0; + + WARN_ON(!pdat); + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (resource_size(pres) < 0x1000) + return -ERANGE; + + pres->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE; + if (pdat->generation < 2) { + pres->flags |= WIN_USE_WAIT | WIN_DATA_WIDTH_8; + memspeed = 3; + } else { + pres->flags |= WIN_DATA_WIDTH_16; + } + return pcmcia_request_window(pcmcia, pres, memspeed); +} + +static __devexit void softingcs_remove(struct pcmcia_device *pcmcia) +{ + struct platform_device *pdev = pcmcia->priv; + + /* free bits */ + platform_device_unregister(pdev); + /* release pcmcia stuff */ + pcmcia_disable_device(pcmcia); +} + +/* + * platform_device wrapper + * pdev->resource has 2 entries: io & irq + */ +static void softingcs_pdev_release(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + kfree(pdev); +} + +static __devinit int softingcs_probe(struct pcmcia_device *pcmcia) +{ + int ret; + struct platform_device *pdev; + const struct softing_platform_data *pdat; + struct resource *pres; + struct dev { + struct platform_device pdev; + struct resource res[2]; + } *dev; + + /* find matching platform_data */ + pdat = softingcs_find_platform_data(pcmcia->manf_id, pcmcia->card_id); + if (!pdat) + return -ENOTTY; + + /* setup pcmcia device */ + pcmcia->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(pcmcia, softingcs_probe_config, (void *)pdat); + if (ret) + goto pcmcia_failed; + + ret = pcmcia_enable_device(pcmcia); + if (ret < 0) + goto pcmcia_failed; + + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (!pres) { + ret = -EBADF; + goto pcmcia_bad; + } + + /* create softing platform device */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + ret = -ENOMEM; + goto mem_failed; + } + dev->pdev.resource = dev->res; + dev->pdev.num_resources = ARRAY_SIZE(dev->res); + dev->pdev.dev.release = softingcs_pdev_release; + + pdev = &dev->pdev; + pdev->dev.platform_data = (void *)pdat; + pdev->dev.parent = &pcmcia->dev; + pcmcia->priv = pdev; + + /* platform device resources */ + pdev->resource[0].flags = IORESOURCE_MEM; + pdev->resource[0].start = pres->start; + pdev->resource[0].end = pres->end; + + pdev->resource[1].flags = IORESOURCE_IRQ; + pdev->resource[1].start = pcmcia->irq; + pdev->resource[1].end = pdev->resource[1].start; + + /* platform device setup */ + spin_lock(&softingcs_index_lock); + pdev->id = softingcs_index++; + spin_unlock(&softingcs_index_lock); + pdev->name = "softing"; + dev_set_name(&pdev->dev, "softingcs.%i", pdev->id); + ret = platform_device_register(pdev); + if (ret < 0) + goto platform_failed; + + dev_info(&pcmcia->dev, "created %s\n", dev_name(&pdev->dev)); + return 0; + +platform_failed: + kfree(dev); +mem_failed: +pcmcia_bad: +pcmcia_failed: + pcmcia_disable_device(pcmcia); + pcmcia->priv = NULL; + return ret ?: -ENODEV; +} + +static /*const*/ struct pcmcia_device_id softingcs_ids[] = { + /* softing */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0004), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0005), + /* vector, manufacturer? */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0081), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0084), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0085), + /* EDIC */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0102), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0105), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, softingcs_ids); + +static struct pcmcia_driver softingcs_driver = { + .owner = THIS_MODULE, + .name = "softingcs", + .id_table = softingcs_ids, + .probe = softingcs_probe, + .remove = __devexit_p(softingcs_remove), +}; + +static int __init softingcs_start(void) +{ + spin_lock_init(&softingcs_index_lock); + return pcmcia_register_driver(&softingcs_driver); +} + +static void __exit softingcs_stop(void) +{ + pcmcia_unregister_driver(&softingcs_driver); +} + +module_init(softingcs_start); +module_exit(softingcs_stop); + +MODULE_DESCRIPTION("softing CANcard driver" + ", links PCMCIA card to softing driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4