From 096d2dac25f9947d1cb1e16a16468de8fda685e6 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Nuno=20S=C3=A1?= Date: Mon, 12 Sep 2022 10:12:22 +0200 Subject: [PATCH] iio: adc: ad7923: support extended range MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit By default the driver was always setting the RANGE bit which means that the analog input goes from 0 to VREF. However, we might want to have 0 to 2xVREF. This change adds a new Firmware property to allow for the extended range while keeping the default behavior if nothing is provided. Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20220912081223.173584-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7923.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c index 502253f..9d6bf6d 100644 --- a/drivers/iio/adc/ad7923.c +++ b/drivers/iio/adc/ad7923.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include @@ -300,6 +301,7 @@ static void ad7923_regulator_disable(void *data) static int ad7923_probe(struct spi_device *spi) { + u32 ad7923_range = AD7923_RANGE; struct ad7923_state *st; struct iio_dev *indio_dev; const struct ad7923_chip_info *info; @@ -311,8 +313,11 @@ static int ad7923_probe(struct spi_device *spi) st = iio_priv(indio_dev); + if (device_property_read_bool(&spi->dev, "adi,range-double")) + ad7923_range = 0; + st->spi = spi; - st->settings = AD7923_CODING | AD7923_RANGE | + st->settings = AD7923_CODING | ad7923_range | AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS); info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data]; -- 2.7.4