From 0837bb7260a17283b4518e11206546ffc92265fc Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Fri, 12 Aug 2011 10:28:18 +0200 Subject: [PATCH] mfd: Add db8500-prcmu accessors for PLL and SGA clock This extends the DB8500 PRCMU driver with accessor calls for the PRCMU PLL and SGA clocks. Signed-off-by: Mattias Nilsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 83 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 82 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index cea8145..af36999 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -459,6 +459,35 @@ struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { CLK_MGT_ENTRY(UICCCLK), }; +static struct regulator *hwacc_regulator[NUM_HW_ACC]; +static struct regulator *hwacc_ret_regulator[NUM_HW_ACC]; + +static bool hwacc_enabled[NUM_HW_ACC]; +static bool hwacc_ret_enabled[NUM_HW_ACC]; + +static const char *hwacc_regulator_name[NUM_HW_ACC] = { + [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp", + [HW_ACC_SVAPIPE] = "hwacc-sva-pipe", + [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp", + [HW_ACC_SIAPIPE] = "hwacc-sia-pipe", + [HW_ACC_SGA] = "hwacc-sga", + [HW_ACC_B2R2] = "hwacc-b2r2", + [HW_ACC_MCDE] = "hwacc-mcde", + [HW_ACC_ESRAM1] = "hwacc-esram1", + [HW_ACC_ESRAM2] = "hwacc-esram2", + [HW_ACC_ESRAM3] = "hwacc-esram3", + [HW_ACC_ESRAM4] = "hwacc-esram4", +}; + +static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { + [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret", + [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret", + [HW_ACC_ESRAM1] = "hwacc-esram1-ret", + [HW_ACC_ESRAM2] = "hwacc-esram2-ret", + [HW_ACC_ESRAM3] = "hwacc-esram3-ret", + [HW_ACC_ESRAM4] = "hwacc-esram4-ret", +}; + /* * Used by MCDE to setup all necessary PRCMU registers */ @@ -1023,6 +1052,34 @@ int prcmu_release_usb_wakeup_state(void) return r; } +static int request_pll(u8 clock, bool enable) +{ + int r = 0; + + if (clock == PRCMU_PLLSOC1) + clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF); + else + return -EINVAL; + + mutex_lock(&mb1_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF)); + + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb1_transfer.work); + + if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + /** * db8500_prcmu_set_epod - set the state of a EPOD (power domain) * @epod_id: The EPOD to set @@ -1220,6 +1277,26 @@ static int request_reg_clock(u8 clock, bool enable) return 0; } +static int request_sga_clock(u8 clock, bool enable) +{ + u32 val; + int ret; + + if (enable) { + val = readl(PRCM_CGATING_BYPASS); + writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS); + } + + ret = request_reg_clock(clock, enable); + + if (!ret && !enable) { + val = readl(PRCM_CGATING_BYPASS); + writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS); + } + + return ret; +} + /** * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled. * @clock: The clock for which the request is made. @@ -1230,12 +1307,16 @@ static int request_reg_clock(u8 clock, bool enable) */ int db8500_prcmu_request_clock(u8 clock, bool enable) { - if (clock < PRCMU_NUM_REG_CLOCKS) + if (clock == PRCMU_SGACLK) + return request_sga_clock(clock, enable); + else if (clock < PRCMU_NUM_REG_CLOCKS) return request_reg_clock(clock, enable); else if (clock == PRCMU_TIMCLK) return request_timclk(enable); else if (clock == PRCMU_SYSCLK) return request_sysclk(enable); + else if (clock == PRCMU_PLLSOC1) + return request_pll(clock, enable); else return -EINVAL; } -- 2.7.4