From 07112465ebfb825a60be301816786656d3055002 Mon Sep 17 00:00:00 2001 From: Jim Kingdon Date: Mon, 9 Jan 1995 21:32:53 +0000 Subject: [PATCH] * gdb.base/help.exp: Replace most of docstrings for "info signals" and "signal" with ".*". --- gdb/testsuite/ChangeLog | 5 + gdb/testsuite/gdb.base/help.exp | 2967 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 2972 insertions(+) create mode 100644 gdb/testsuite/gdb.base/help.exp diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index da954f8..2816bd4 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,8 @@ +Mon Jan 9 16:22:46 1995 Jim Kingdon + + * gdb.base/help.exp: Replace most of docstrings for "info signals" + and "signal" with ".*". + Wed Jan 4 11:35:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add note about "handle all nostop". diff --git a/gdb/testsuite/gdb.base/help.exp b/gdb/testsuite/gdb.base/help.exp new file mode 100644 index 0000000..d585b8d --- /dev/null +++ b/gdb/testsuite/gdb.base/help.exp @@ -0,0 +1,2967 @@ +# Copyright (C) 1988, 1990, 1991, 1992 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# This file was written by Rob Savoye. (rob@cygnus.com) + +# +# test gdb help commands +# + +set prms_id 0 +set bug_id 0 + +# force the height of the debugger to be pretty large so no pagers getused +send "set height 400\n" +expect -re "$prompt $" + +# use a larger expect input buffer for long help outputs. +match_max 6000 + +# test help add-symbol-file +send "help add-symbol-file\n" +expect { + -re "Usage: add-symbol-file FILE ADDR.* +Load the symbols from FILE, assuming FILE has been dynamically loaded..* +ADDR is the starting address of the file\'s text..*$prompt $" \ + { pass "help add-symbol-file" } + -re ".*$prompt $" { fail "help add-symbol-file" } + timeout { fail "(timeout) help add-symbol-file" } + } + + +# test help aliases +send "help aliases\n" +expect { + -re "Aliases of other commands..* +List of commands\:.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help aliases" } + -re "$prompt $" { fail "help aliases" } + timeout { fail "(timeout) help aliases" } + } + + +send "help attach\n" +expect { + -re "Attach to a process or file outside of GDB..* +This command attaches to another target, of the same type as your last.* +`target' command .`info files' will show your target stack.* +The command may take as argument a process id or a device file..* +For a process id, you must have permission to send the process a signal,.* +and it must have the same effective uid as the debugger..* +When using \"attach\", you should use the \"file\" command to specify.* +the program running in the process, and to load its symbol table..*$prompt $"\ + { pass "help attach" } + -re "$prompt $" { fail "help attach" } + timeout { fail "(timeout) help attach" } + } + +# -re "$prompt $" { fail "help attach" } + +# test help breakpoint "b" abbreviation +send "help b\n" +expect { + -re "Set breakpoint at specified line or function..* +Argument may be line number, function name, or \"\[*\]\" and an address..* +If line number is specified, break at start of code for that line..* +If function is specified, break at start of code for that function..* +If an address is specified, break at that exact address..* +With no arg, uses current execution address of selected stack frame..* +This is useful for breaking on return to a stack frame..* +Multiple breakpoints at one place are permitted, and useful if conditional..* +Do \"help breakpoints\" for info on other commands dealing with breakpoints..*$prompt $"\ + { pass "help breakpoint \"b\" abbreviation" } + -re "$prompt $" { fail "help breakpoint \"b\" abbreviation" } + timeout { fail "(timeout) help breakpoint \"b\" abbreviation" } + } + + +# test help breakpoint "br" abbreviation +send "help br\n" +expect { + -re "Set breakpoint at specified line or function..* +Argument may be line number, function name, or \"\[*\]\" and an address..* +If line number is specified, break at start of code for that line..* +If function is specified, break at start of code for that function..* +If an address is specified, break at that exact address..* +With no arg, uses current execution address of selected stack frame..* +This is useful for breaking on return to a stack frame..* +Multiple breakpoints at one place are permitted, and useful if conditional..* +Do \"help breakpoints\" for info on other commands dealing with breakpoints..*$prompt $"\ + { pass "help breakpoint \"br\" abbreviation" } + -re "$prompt $" { fail "help breakpoint \"br\" abbreviation" } + timeout { fail "(timeout) help breakpoint \"br\" abbreviation" } + } + + +# test help breakpoint "bre" abbreviation +send "help bre\n" +expect { + -re "Set breakpoint at specified line or function..* +Argument may be line number, function name, or \"\[*\]\" and an address..* +If line number is specified, break at start of code for that line..* +If function is specified, break at start of code for that function..* +If an address is specified, break at that exact address..* +With no arg, uses current execution address of selected stack frame..* +This is useful for breaking on return to a stack frame..* +Multiple breakpoints at one place are permitted, and useful if conditional..* +Do \"help breakpoints\" for info on other commands dealing with breakpoints..*$prompt $"\ + { pass "help breakpoint \"bre\" abbreviation" } + -re "$prompt $" { fail "help breakpoint \"bre\" abbreviation" } + timeout { fail "(timeout) help breakpoint \"bre\" abbreviation" } + } + + +# test help breakpoint "brea" abbreviation +send "help brea\n" +expect { + -re "Set breakpoint at specified line or function..* +Argument may be line number, function name, or \"\[*\]\" and an address..* +If line number is specified, break at start of code for that line..* +If function is specified, break at start of code for that function..* +If an address is specified, break at that exact address..* +With no arg, uses current execution address of selected stack frame..* +This is useful for breaking on return to a stack frame..* +Multiple breakpoints at one place are permitted, and useful if conditional..* +Do \"help breakpoints\" for info on other commands dealing with breakpoints..*$prompt $"\ + { pass "help breakpoint \"brea\" abbreviation" } + -re "$prompt $" { fail "help breakpoint \"brea\" abbreviation" } + timeout { fail "(timeout) help breakpoint \"brea\" abbreviation" } + } + + +# test help breakpoint "break" abbreviation +send "help break\n" +expect { + -re "Set breakpoint at specified line or function..* +Argument may be line number, function name, or \"\[*\]\" and an address..* +If line number is specified, break at start of code for that line..* +If function is specified, break at start of code for that function..* +If an address is specified, break at that exact address..* +With no arg, uses current execution address of selected stack frame..* +This is useful for breaking on return to a stack frame..* +Multiple breakpoints at one place are permitted, and useful if conditional..* +Do \"help breakpoints\" for info on other commands dealing with breakpoints..*$prompt $"\ + { pass "help breakpoint \"break\" abbreviation" } + -re "$prompt $" { fail "help breakpoint \"break\" abbreviation" } + timeout { fail "(timeout) help breakpoint \"break\" abbreviation" } + } + + +# test help breakpoints +send "help breakpoints\n" +expect { + -re "Making program stop at certain points..* +List of commands\:.* +watch -- Set a watchpoint for an expression.* +catch -- Set breakpoints to catch exceptions that are raised.* +break -- Set breakpoint at specified line or function.* +clear -- Clear breakpoint at specified line or function.* +delete -- Delete some breakpoints or auto-display expressions.* +disable -- Disable some breakpoints.* +enable -- Enable some breakpoints.* +tbreak -- Set a temporary breakpoint.* +condition -- Specify breakpoint number N to break only if COND is true.* +commands -- Set commands to be executed when a breakpoint is hit.* +ignore -- Set ignore-count of breakpoint number N to COUNT.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help breakpoints" } + -re "$prompt $" { fail "help breakpoints" } + timeout { fail "(timeout) help breakpoints" } + } + + +# test help backtrace "bt" abbreviation +send "help bt\n" +expect { + -re "Print backtrace of all stack frames, or innermost COUNT frames..* +With a negative argument, print outermost -COUNT frames..*$prompt $"\ + { pass "help backtrace \"bt\" abbreviation" } + -re "$prompt $" { fail "help backtrace \"bt\" abbreviation" } + timeout { fail "(timeout) help backtrace \"bt\" abbreviation" } + } + + +# test help backtrace +send "help backtrace\n" +expect { + -re "Print backtrace of all stack frames, or innermost COUNT frames..* +With a negative argument, print outermost -COUNT frames..*$prompt $"\ + { pass "help backtrace" } + -re "$prompt $" { fail "help backtrace" } + timeout { fail "(timeout) help backtrace" } + } + + +# test help continue "c" abbreviation +send "help c\n" +expect { + -re "Continue program being debugged.*$prompt $"\ + { pass "help continue \"c\" abbreviation" } + -re "$prompt $" { fail "help continue \"c\" abbreviation" } + timeout { fail "(timeout) help continue \"c\" abbreviation" } + } + + +# test help continue +send "help continue\n" +expect { + -re "Continue program being debugged.*$prompt $"\ + { pass "help continue" } + -re "$prompt $" { fail "help continue" } + timeout { fail "(timeout) help continue" } + } + + +# test help call +send "help call\n" +expect { + -re "Call a function.*$prompt $"\ + { pass "help call" } + -re "$prompt $" { fail "help call" } + timeout { fail "(timeout) help call" } + } + + +# test help catch +send "help catch\n" +expect { + -re "Set breakpoints to catch exceptions that are raised..* +Argument may be a single exception to catch, multiple exceptions.* +to catch, or the default exception \"default\". If no arguments.* +are given, breakpoints are set at all exception handlers catch clauses.* +within the current scope..* +A condition specified for the catch applies to all breakpoints set.* +with this command.* +Do \"help breakpoints\" for info on other commands dealing with breakpoints..*$prompt $"\ + { pass "help catch" } + -re "$prompt $" { fail "help catch" } + timeout { fail "(timeout) help catch" } + } + + +# test help cd +send "help cd\n" +expect { + -re "Set working directory to DIR for debugger and program being debugged..* +The change does not take effect for the program being debugged.* +until the next time it is started..*$prompt $"\ + { pass "help cd" } + -re "$prompt $" { fail "help cd" } + timeout { fail "(timeout) help cd" } + } + + +# test help clear +send "help clear\n" +expect { + -re "Clear breakpoint at specified line or function.* +Argument may be line number, function name, or .* and an address.* +If line number is specified, all breakpoints in that line are cleared.* +If function is specified, breakpoints at beginning of function are cleared.* +If an address is specified, breakpoints at that address are cleared.* +With no argument, clears all breakpoints in the line that the selected frame.* +is executing in..* +See also the \"delete\" command which clears breakpoints by number..*$prompt $"\ + { pass "help clear" } + -re "$prompt $" { fail "help clear" } + timeout { fail "(timeout) help clear" } + } + + +# test help commands +send "help commands\n" +expect { + -re "Set commands to be executed when a breakpoint is hit..* +Give breakpoint number as argument after \"commands\"..* +With no argument, the targeted breakpoint is the last one set..* +The commands themselves follow starting on the next line..* +Type a line containing \"end\" to indicate the end of them..* +Give \"silent\" as the first line to make the breakpoint silent;.* +then no output is printed when it is hit, except what the commands print..*$prompt $"\ + { pass "help commands" } + -re "$prompt $" { fail "help commands" } + timeout { fail "(timeout) help commands" } + } + + +# test help condition +send "help condition\n" +expect { + -re "Specify breakpoint number N to break only if COND is true..* +Usage is `condition N COND', where N is an integer and COND is an.* +expression to be evaluated whenever breakpoint N is reached. .*$prompt $"\ + { pass "help condition" } + -re "$prompt $" { fail "help condition" } + timeout { fail "(timeout) help condition" } + } + + +# test help core-file +send "help core-file\n" +expect { + -re "Use FILE as core dump for examining memory and registers..* +No arg means have no core file. This command has been superseded by the.* +`target core' and `detach' commands..*$prompt $"\ + { pass "help core-file" } + -re "$prompt $" { fail "help core-file" } + timeout { fail "(timeout) help core-file" } + } + + +# test help delete "d" abbreviation +send "help d\n" +expect { + -re "Delete some breakpoints or auto-display expressions..* +Arguments are breakpoint numbers with spaces in between..* +To delete all breakpoints, give no argument..* +Also a prefix command for deletion of other GDB objects..* +The \"unset\" command is also an alias for \"delete\"..* +List of delete subcommands:.* +delete display -- Cancel some expressions to be displayed when program stops.* +delete breakpoints -- Delete some breakpoints or auto-display expressions.* +Type \"help delete\" followed by delete subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help delete \"d\" abbreviation" } + -re "$prompt $" { fail "help delete \"d\" abbreviation" } + timeout { fail "(timeout) help delete \"d\" abbreviation" } + } + + +# test help delete +send "help delete\n" +expect { + -re "Delete some breakpoints or auto-display expressions..* +Arguments are breakpoint numbers with spaces in between..* +To delete all breakpoints, give no argument..* +Also a prefix command for deletion of other GDB objects..* +The \"unset\" command is also an alias for \"delete\"..* +List of delete subcommands:.* +delete display -- Cancel some expressions to be displayed when program stops.* +delete breakpoints -- Delete some breakpoints or auto-display expressions.* +Type \"help delete\" followed by delete subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help delete" } + -re "$prompt $" { fail "help delete" } + timeout { fail "(timeout) help delete" } + } + + +# test help data +send "help data\n" +expect { + -re ".* +Examining data..* +List of commands:.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help data" } + -re "$prompt $" { fail "help data" } + timeout { fail "(timeout) help data" } + } + + +# test help define +send "help define\n" +expect { + -re "Define a new command name. Command name is argument..* +Definition appears on following lines, one command per line..* +End with a line of just \"end\"..* +Use the \"document\" command to give documentation for the new command..* +Commands defined in this way do not take arguments..*$prompt $"\ + { pass "help define" } + -re "$prompt $" { fail "help define" } + timeout { fail "(timeout) help define" } + } + + +# test help delete breakpoints +send "help delete breakpoints\n" +expect { + -re "Delete some breakpoints or auto-display expressions..* +Arguments are breakpoint numbers with spaces in between..* +To delete all breakpoints, give no argument..* +This command may be abbreviated \"delete\"..*$prompt $"\ + { pass "help delete breakpoints" } + -re "$prompt $" { fail "help delete breakpoints" } + timeout { fail "(timeout) help delete breakpoints" } + } + + +# test help delete display +send "help delete display\n" +expect { + -re "Cancel some expressions to be displayed when program stops..* +Arguments are the code numbers of the expressions to stop displaying..* +No argument means cancel all automatic-display expressions..* +Do \"info display\" to see current list of code numbers..*$prompt $"\ + { pass "help delete display" } + -re "$prompt $" { fail "help delete display" } + timeout { fail "(timeout) help delete display" } + } + + +# test help detach +send "help detach\n" +expect { + -re "Detach a process or file previously attached..* +If a process, it is no longer traced, and it continues its execution. If you.* +were debugging a file, the file is closed and gdb no longer accesses it..*$prompt $"\ + { pass "help detach" } + -re "$prompt $" { fail "help detach" } + timeout { fail "(timeout) help detach" } + } + + +# test help directory +send "help directory\n" +expect { + -re "Add directory DIR to beginning of search path for source files..* +Forget cached info on source file locations and line positions..* +DIR can also be .cwd for the current working directory, or .cdir for the.* +directory in which the source file was compiled into object code..* +With no argument, reset the search path to .cdir:.cwd, the default..*$prompt $"\ + { pass "help directory" } + -re "$prompt $" { fail "help directory" } + timeout { fail "(timeout) help directory" } + } + + +# test help disable "dis" abbreviation +send "help dis\n" +expect { + -re "Disable some breakpoints..* +Arguments are breakpoint numbers with spaces in between..* +To disable all breakpoints, give no argument..* +A disabled breakpoint is not forgotten, but has no effect until reenabled..* +List of disable subcommands:.* +disable display -- Disable some expressions to be displayed when program stops.* +disable breakpoints -- Disable some breakpoints.* +Type \"help disable\" followed by disable subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help disable \"dis\" abbreviation" } + -re "$prompt $" { fail "help disable \"dis\" abbreviation" } + timeout { fail "(timeout) help disable \"dis\" abbreviation" } + } + + +# test help disable "disa" abbreviation +send "help disa\n" +expect { + -re "Disable some breakpoints..* +Arguments are breakpoint numbers with spaces in between..* +To disable all breakpoints, give no argument..* +A disabled breakpoint is not forgotten, but has no effect until reenabled..* +List of disable subcommands:.* +disable display -- Disable some expressions to be displayed when program stops.* +disable breakpoints -- Disable some breakpoints.* +Type \"help disable\" followed by disable subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help disable \"disa\" abbreviation" } + -re "$prompt $" { fail "help disable \"disa\" abbreviation" } + timeout { fail "(timeout) help disable \"disa\" abbreviation" } + } + + +# test help disable +send "help disable\n" +expect { + -re "Disable some breakpoints..* +Arguments are breakpoint numbers with spaces in between..* +To disable all breakpoints, give no argument..* +A disabled breakpoint is not forgotten, but has no effect until reenabled..* +List of disable subcommands:.* +disable display -- Disable some expressions to be displayed when program stops.* +disable breakpoints -- Disable some breakpoints.* +Type \"help disable\" followed by disable subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help disable" } + -re "$prompt $" { fail "help disable" } + timeout { fail "(timeout) help disable" } + } + + +# test help disable breakpoints +send "help disable breakpoints\n" +expect { + -re "Disable some breakpoints..* +Arguments are breakpoint numbers with spaces in between..* +To disable all breakpoints, give no argument..* +A disabled breakpoint is not forgotten, but has no effect until reenabled..* +This command may be abbreviated \"disable\"..*$prompt $"\ + { pass "help disable breakpoints" } + -re "$prompt $" { fail "help disable breakpoints" } + timeout { fail "(timeout) help disable breakpoints" } + } + + +# test help disable display +send "help disable display\n" +expect { + -re "Disable some expressions to be displayed when program stops..* +Arguments are the code numbers of the expressions to stop displaying..* +No argument means disable all automatic-display expressions..* +Do \"info display\" to see current list of code numbers..*$prompt $"\ + { pass "help disable display" } + -re "$prompt $" { fail "help disable display" } + timeout { fail "(timeout) help disable display" } + } + + +# test help disassemble +send "help disassemble\n" +expect { + -re "Disassemble a specified section of memory..* +Default is the function surrounding the pc of the selected frame..* +With a single argument, the function surrounding that address is dumped..* +Two arguments are taken as a range of memory to dump..*$prompt $"\ + { pass "help disassemble" } + -re "$prompt $" { fail "help disassemble" } + timeout { fail "(timeout) help disassemble" } + } + + +# test help display +send "help display\n" +expect { + -re "Print value of expression EXP each time the program stops..* +/FMT may be used before EXP as in the \"print\" command..* +/FMT \"i\" or \"s\" or including a size-letter is allowed,.* +as in the \"x\" command, and then EXP is used to get the address to examine.* +and examining is done as in the \"x\" command..* +With no argument, display all currently requested auto-display expressions..* +Use \"undisplay\" to cancel display requests previously made..*$prompt $"\ + { pass "help display" } + -re "$prompt $" { fail "help display" } + timeout { fail "(timeout) help display" } + } + + +# test help do +send "help do\n" +expect { + -re "Select and print stack frame called by this one..* +An argument says how many frames down to go..*$prompt $"\ + { pass "help do" } + -re "$prompt $" { fail "help do" } + timeout { fail "(timeout) help do" } + } + + +# test help document +send "help document\n" +expect { + -re "Document a user-defined command..* +Give command name as argument. Give documentation on following lines..* +End with a line of just \"end\"..*$prompt $"\ + { pass "help document" } + -re "$prompt $" { fail "help document" } + timeout { fail "(timeout) help document" } + } + + + +# test help down +send "help down\n" +expect { + -re "Select and print stack frame called by this one..* +An argument says how many frames down to go..*$prompt $"\ + { pass "help down" } + -re "$prompt $" { fail "help down" } + timeout { fail "(timeout) help down" } + } + + +# test help down-silently +send "help down-silently\n" +expect { + -re "Same as the `down' command, but does not print anything..* +This is useful in command scripts..*$prompt $"\ + { pass "help down-silently" } + -re "$prompt $" { fail "help down-silently" } + timeout { fail "(timeout) help down-silently" } + } + + +# this command was removed from GDB 4.5.8 +# test help dump-me +#send "help dump-me\n" +#expect { +# -re "Get fatal error; make debugger dump its core..*$prompt $"\ +# { pass "help dump-me" } +# -re "$prompt $" { fail "help dump-me" } +# timeout { fail "(timeout) help dump-me" } +# } + +# test help echo +send "help echo\n" +expect { + -re "Print a constant string. Give string as argument..* +C escape sequences may be used in the argument..* +No newline is added at the end of the argument;.* +use \".n\" if you want a newline to be printed..* +Since leading and trailing whitespace are ignored in command arguments,.* +if you want to print some you must use \".\" before leading whitespace.* +to be printed or after trailing whitespace..*$prompt $"\ + { pass "help echo" } + -re "$prompt $" { fail "help echo" } + timeout { fail "(timeout) help echo" } + } + + +# test help enable breakpoints delete +send "help enable breakpoints delete\n" +expect { + -re "Enable breakpoints and delete when hit. Give breakpoint numbers..* +If a breakpoint is hit while enabled in this fashion, it is deleted..*$prompt $"\ + { pass "help enable breakpoints delete" } + -re "$prompt $" { fail "help enable breakpoints delete" } + timeout { fail "(timeout) help enable breakpoints delete" } + } + + +# test help enable breakpoints once +send "help enable breakpoints once\n" +expect { + -re "Enable breakpoints for one hit..*$prompt $"\ + { pass "help enable breakpoints once" } + -re "$prompt $" { fail "help enable breakpoints once" } + timeout { fail "(timeout) help enable breakpoints once" } + } + + +# test help enable breakpoints +send "help enable breakpoints\n" +expect { + -re "Enable some breakpoints..* +Give breakpoint numbers .separated by spaces. as arguments..* +This is used to cancel the effect of the \"disable\" command..* +May be abbreviated to simply \"enable\"..*.* +List of enable breakpoints subcommands:.* +enable breakpoints delete -- Enable breakpoints and delete when hit.* +enable breakpoints once -- Enable breakpoints for one hit.* +Type \"help enable breakpoints\" followed by enable breakpoints subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help enable breakpoints" } + -re "$prompt $" { fail "help enable breakpoints" } + timeout { fail "(timeout) help enable breakpoints" } + } + + +# test help enable delete +send "help enable delete\n" +expect { + -re "Enable breakpoints and delete when hit. Give breakpoint numbers..* +If a breakpoint is hit while enabled in this fashion, it is deleted..*$prompt $"\ + { pass "help enable delete" } + -re "$prompt $" { fail "help enable delete" } + timeout { fail "(timeout) help enable delete" } + } + + +# test help enable display +send "help enable display\n" +expect { + -re "Enable some expressions to be displayed when program stops..* +Arguments are the code numbers of the expressions to resume displaying..* +No argument means enable all automatic-display expressions..* +Do \"info display\" to see current list of code numbers..*$prompt $"\ + { pass "help enable display" } + -re "$prompt $" { fail "help enable display" } + timeout { fail "(timeout) help enable display" } + } + + +# test help enable once +send "help enable once\n" +expect { + -re "Enable breakpoints for one hit.*$prompt $"\ + { pass "help enable once" } + -re "$prompt $" { fail "help enable once" } + timeout { fail "(timeout) help enable once" } + } + + +# test help enable +send "help enable\n" +expect { + -re "Enable some breakpoints..* +Give breakpoint numbers .separated by spaces. as arguments..* +With no subcommand, breakpoints are enabled until you command otherwise..* +This is used to cancel the effect of the \"disable\" command..* +With a subcommand you can enable temporarily..* +List of enable subcommands:.* +enable display -- Enable some expressions to be displayed when program stops.* +enable once -- Enable breakpoints for one hit.* +enable delete -- Enable breakpoints and delete when hit.* +Type \"help enable\" followed by enable subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help enable" } + -re "$prompt $" { fail "help enable" } + timeout { fail "(timeout) help enable" } + } + + +# test help exec-file +send "help exec-file\n" +expect { + -re "Use FILE as program for getting contents of pure memory..* +If FILE cannot be found as specified, your execution directory path.* +is searched for a command of that name..* +No arg means have no executable file..*$prompt $"\ + { pass "help exec-file" } + -re "$prompt $" { fail "help exec-file" } + timeout { fail "(timeout) help exec-file" } + } + + +# test help frame "f" abbreviation +send "help f\n" +expect { + -re "Select and print a stack frame..* +With no argument, print the selected stack frame. .See also \"info frame\".* +An argument specifies the frame to select..* +It can be a stack frame number or the address of the frame..* +With argument, nothing is printed if input is coming from.* +a command file or a user-defined command..*$prompt $"\ + { pass "help frame \"f\" abbreviation" } + -re "$prompt $" { fail "help frame \"f\" abbreviation" } + timeout { fail "(timeout) help frame \"f\" abbreviation" } + } + + +# test help frame +send "help frame\n" +expect { + -re "Select and print a stack frame..* +With no argument, print the selected stack frame. .See also \"info frame\"...* +An argument specifies the frame to select..* +It can be a stack frame number or the address of the frame..* +With argument, nothing is printed if input is coming from.* +a command file or a user-defined command..*$prompt $"\ + { pass "help frame" } + -re "$prompt $" { fail "help frame" } + timeout { fail "(timeout) help frame" } + } + + +# test help fg +send "help fg\n" +expect { + -re "Continue program being debugged.*$prompt $"\ + { pass "help fg" } + -re "$prompt $" { fail "help fg" } + timeout { fail "(timeout) help fg" } + } + + +# test help file +send "help file\n" +expect { + -re "Use FILE as program to be debugged..* +It is read for its symbols, for getting the contents of pure memory,.* +and it is the program executed when you use the `run' command..* +If FILE cannot be found as specified, your execution directory path.* +..PATH. is searched for a command of that name..* +No arg means to have no executable file and no symbols..*$prompt $"\ + { pass "help file" } + -re "$prompt $" { fail "help file" } + timeout { fail "(timeout) help file" } + } + + +# test help files +send "help files\n" +expect { + -re "Specifying.*$prompt $" { pass "help files" } + -re "$prompt $" { fail "help files" } + timeout { fail "(timeout) help files" } + } + + +# test help finish +send "help finish\n" +expect { + -re "Execute until selected stack frame returns..* +Upon return, the value returned is printed and put in the value history..*$prompt $"\ + { pass "help finish" } + -re "$prompt $" { fail "help finish" } + timeout { fail "(timeout) help finish" } + } + + +# test help forward-search +send "help forward-search\n" +expect { + -re "Search for regular expression .see regex.3.. from last line listed..*$prompt $"\ + { pass "help forward-search" } + -re "$prompt $" { fail "help forward-search" } + timeout { fail "(timeout) help forward-search" } + } + + +# test help help "h" abbreviation +send "help h\n" +expect { + -re "Print list of commands..*$prompt $"\ + { pass "help help \"h\" abbreviation" } + -re "$prompt $" { fail "help help \"h\" abbreviation" } + timeout { fail "(timeout) help help \"h\" abbreviation" } + } + + +# test help help +send "help help\n" +expect { + -re "Print list of commands..*$prompt $"\ + { pass "help help" } + -re "$prompt $" { fail "help help" } + timeout { fail "(timeout) help help" } + } + + +# test help handle +send "help handle\n" +expect { + -re "Specify how to handle a signal..*$prompt $"\ + { pass "help handle" } + -re "$prompt $" { fail "help handle" } + timeout { fail "(timeout) help handle" } + } + + +# test help info "i" abbreviation +send "help i\n" +expect { + -re "Generic command for showing things about the program being debugged..* +List of info subcommands:.* +Type \"help info\" followed by info subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help info \"i\" abbreviation" } + -re "$prompt $" { fail "help info \"i\" abbreviation" } + timeout { fail "(timeout) help info \"i\" abbreviation" } + } + + +# test help info +send "help info\n" +expect { + -re "Generic command for showing things about the program being debugged..* +List of info subcommands:.* +Type \"help info\" followed by info subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help info" } + -re "$prompt $" { fail "help info" } + timeout { fail "(timeout) help info" } + } + + +# test help ignore +send "help ignore\n" +expect { + -re "Set ignore-count of breakpoint number N to COUNT..* +Usage is `ignore N COUNT'..*$prompt $"\ + { pass "help ignore" } + -re "$prompt $" { fail "help ignore" } + timeout { fail "(timeout) help ignore" } + } + + +# test help info address +send "help info address\n" +expect { + -re "Describe where variable VAR is stored..*$prompt $"\ + { pass "help info address" } + -re "$prompt $" { fail "help info address" } + timeout { fail "(timeout) help info address" } + } + + +# test help info all-registers +send "help info all-registers\n" +expect { + -re "List of all registers and their contents, for selected stack frame..* +Register name as argument means describe only that register..*$prompt $"\ + { pass "help info all-registers" } + -re "$prompt $" { fail "help info all-registers" } + timeout { fail "(timeout) help info all-registers" } + } + + +# test help info args +send "help info args\n" +expect { + -re "Argument variables of current stack frame..*$prompt $"\ + { pass "help info args" } + -re "$prompt $" { fail "help info args" } + timeout { fail "(timeout) help info args" } + } + + +# test help info breakpoints +send "help info breakpoints\n" +expect { + -re "Status of user-settable breakpoints, or breakpoint number NUMBER..* +breakpoint set..*$prompt $"\ + { pass "help info breakpoints" } + -re "$prompt $" { fail "help info breakpoints" } + timeout { fail "(timeout) help info breakpoints" } + } + + +# test help info catch +send "help info catch\n" +expect { + -re "Exceptions that can be caught in the current stack frame..*$prompt $"\ + { pass "help info catch" } + -re "$prompt $" { fail "help info catch" } + timeout { fail "(timeout) help info catch" } + } + + +# test help info copying +send "help info copying\n" +expect { + -re "Conditions for redistributing copies of GDB..*$prompt $"\ + { pass "help info copying" } + -re "$prompt $" { fail "help info copying" } + timeout { fail "(timeout) help info copying" } + } + + +# test help info display +send "help info display\n" +expect { + -re "Expressions to display when program stops, with code numbers..*$prompt $"\ + { pass "help info display" } + -re "$prompt $" { fail "help info display" } + timeout { fail "(timeout) help info display" } + } + + +# test help info frame "f" abbreviation +send "help info f\n" +expect { + -re "All about selected stack frame, or frame at ADDR..*$prompt $"\ + { pass "help info frame \"f\" abbreviation" } + -re "$prompt $" { fail "help info frame \"f\" abbreviation" } + timeout { fail "(timeout) help info frame \"f\" abbreviation" } + } + + +# test help info frame +send "help info frame\n" +expect { + -re "All about selected stack frame, or frame at ADDR..*$prompt $"\ + { pass "help info frame" } + -re "$prompt $" { fail "help info frame" } + timeout { fail "(timeout) help info frame" } + } + + +# test help info files +send "help info files\n" +expect { + -re "Names of targets and files being debugged..* +Shows the entire stack of targets currently in use .including the exec-file,.* +core-file, and process, if any., as well as the symbol file name..*$prompt $"\ + { pass "help info files" } + -re "$prompt $" { fail "help info files" } + timeout { fail "(timeout) help info files" } + } + + +# test help info float +send "help info float\n" +expect { + -re "Print the status of the floating point unit.*$prompt $"\ + { pass "help info float" } + -re "$prompt $" { fail "help info float" } + timeout { fail "(timeout) help info float" } + } + + +# test help info functions +send "help info functions\n" +expect { + -re "All function names, or those matching REGEXP..*$prompt $"\ + { pass "help info functions" } + -re "$prompt $" { fail "help info functions" } + timeout { fail "(timeout) help info functions" } + } + + +# test help info line +send "help info line\n" +expect { + -re "Core addresses of the code for a source line..* +Line can be specified as.* + LINENUM, to list around that line in current file,.* + FILE:LINENUM, to list around that line in that file,.* + FUNCTION, to list around beginning of that function,.* + FILE:FUNCTION, to distinguish among like-named static functions..* +Default is to describe the last source line that was listed..* +This sets the default address for \"x\" to the line's first instruction.* +so that \"x.i\" suffices to start examining the machine code..* +The address is also stored as the value of \"._\"..*$prompt $"\ + { pass "help info line" } + -re "$prompt $" { fail "help info line" } + timeout { fail "(timeout) help info line" } + } + + +# test help info locals +send "help info locals\n" +expect { + -re "Local variables of current stack frame..*$prompt $"\ + { pass "help info locals" } + -re "$prompt $" { fail "help info locals" } + timeout { fail "(timeout) help info locals" } + } + + +# test help info program +send "help info program\n" +expect { + -re "Execution status of the program..*$prompt $"\ + { pass "help info program" } + -re "$prompt $" { fail "help info program" } + timeout { fail "(timeout) help info program" } + } + + +# test help info registers +send "help info registers\n" +expect { + -re "List of integer registers and their contents, for selected stack frame..* +Register name as argument means describe only that register..*$prompt $"\ + { pass "help info registers" } + -re "$prompt $" { fail "help info registers" } + timeout { fail "(timeout) help info registers" } + } + + +# test help info stack "s" abbreviation +send "help info s\n" +expect { + -re "Backtrace of the stack, or innermost COUNT frames..*$prompt $"\ + { pass "help info stack \"s\" abbreviation" } + -re "$prompt $" { fail "help info stack \"s\" abbreviation" } + timeout { fail "(timeout) help info stack \"s\" abbreviation" } + } + + +# test help info stack +send "help info stack\n" +expect { + -re "Backtrace of the stack, or innermost COUNT frames..*$prompt $"\ + { pass "help info stack" } + -re "$prompt $" { fail "help info stack" } + timeout { fail "(timeout) help info stack" } + } + + +# test help info set +send "help info set\n" +expect { + -re "Show all GDB settings..*$prompt $"\ + { pass "help info set" } + -re "$prompt $" { fail "help info set" } + timeout { fail "(timeout) help info set" } + } + + +# test help info signals +send "help info signals\n" +expect { + -re "What debugger does when program gets various signals.*$prompt $"\ + { pass "help info signals" } + -re "$prompt $" { fail "help info signals" } + timeout { fail "(timeout) help info signals" } + } + + +# test help info source +send "help info source\n" +expect { + -re "Information about the current source file..*$prompt $"\ + { pass "help info source" } + -re "$prompt $" { fail "help info source" } + timeout { fail "(timeout) help aliases" } + } + + +# test help info sources +send "help info sources\n" +expect { + -re "Source files in the program..*$prompt $"\ + { pass "help info sources" } + -re "$prompt $" { fail "help info sources" } + timeout { fail "(timeout) help info sources" } + } + + +# test help info target +send "help info target\n" +expect { + -re "Names of targets and files being debugged..* +Shows the entire stack of targets currently in use .including the exec-file,.* +core-file, and process, if any., as well as the symbol file name..*$prompt $"\ + { pass "help info target" } + -re "$prompt $" { fail "help info target" } + timeout { fail "(timeout) help info target" } + } + + +# test help info terminal +send "help info terminal\n" +expect { + -re "Print inferior's saved terminal status..*$prompt $"\ + { pass "help info terminal" } + -re "$prompt $" { fail "help info terminal" } + timeout { fail "(timeout) help info terminal" } + } + + +# test help info types +send "help info types\n" +expect { + -re "All type names, or those matching REGEXP..*$prompt $"\ + { pass "help info types" } + -re "$prompt $" { fail "help info types" } + timeout { fail "(timeout) help info types" } + } + + +# test help info variables +send "help info variables\n" +expect { + -re "All global and static variable names, or those matching REGEXP..*$prompt $"\ + { pass "help info variables" } + -re "$prompt $" { fail "help info variables" } + timeout { fail "(timeout) help info variables" } + } + + +# test help info warranty +send "help info warranty\n" +expect { + -re "Various kinds of warranty you do not have..*$prompt $"\ + { pass "help info warranty" } + -re "$prompt $" { fail "help info warranty" } + timeout { fail "(timeout) help info warranty" } + } + + +# test help info watchpoints +send "help info watchpoints\n" +expect { + -re "Synonym for ``info breakpoints''..*$prompt $"\ + { pass "help info watchpoints" } + -re "$prompt $" { fail "help info watchpoints" } + timeout { fail "(timeout) help info watchpoints" } + } + + +# test help inspect +send "help inspect\n" +expect { + -re "Same as \"print\" command, except that if you are running in the epoch.* +environment, the value is printed in its own window..*$prompt $"\ + { pass "help inspect" } + -re "$prompt $" { fail "help inspect" } + timeout { fail "(timeout) help inspect" } + } + + +# test help jump +send "help jump\n" +expect { + -re "Continue program being debugged at specified line or address..* +Give as argument either LINENUM or \[*\]+ADDR, where ADDR is an expression.* +for an address to start at..*$prompt $"\ + { pass "help jump" } + -re "$prompt $" { fail "help jump" } + timeout { fail "(timeout) help jump" } + } + + +# test help kill +send "help kill\n" +expect { + -re "Kill execution of program being debugged..*$prompt $"\ + { pass "help kill" } + -re "$prompt $" { fail "help kill" } + timeout { fail "(timeout) help kill" } + } + + +# test help list "l" abbreviation +send "help l\n" +expect { + -re "List specified function or line..* +With no argument, lists ten more lines after or around previous listing..* +\"list -\" lists the ten lines before a previous ten-line listing..* +One argument specifies a line, and ten lines are listed around that line..* +Two arguments with comma between specify starting and ending lines to list..* +Lines can be specified in these ways:.* + LINENUM, to list around that line in current file,.* + FILE:LINENUM, to list around that line in that file,.* + FUNCTION, to list around beginning of that function,.* + FILE:FUNCTION, to distinguish among like-named static functions..* + \[*\]+ADDRESS, to list around the line containing that address..* +With two args if one is empty it stands for ten lines away from the other arg..*$prompt $"\ + { pass "help list \"l\" abbreviation" } + -re "$prompt $" { fail "help list \"l\" abbreviation" } + timeout { fail "(timeout) help list \"l\" abbreviation" } + } + + +# test help list +send "help list\n" +expect { + -re "List specified function or line..* +With no argument, lists ten more lines after or around previous listing..* +\"list -\" lists the ten lines before a previous ten-line listing..* +One argument specifies a line, and ten lines are listed around that line..* +Two arguments with comma between specify starting and ending lines to list..* +Lines can be specified in these ways:.* + LINENUM, to list around that line in current file,.* + FILE:LINENUM, to list around that line in that file,.* + FUNCTION, to list around beginning of that function,.* + FILE:FUNCTION, to distinguish among like-named static functions..* + \[*\]+ADDRESS, to list around the line containing that address..* +With two args if one is empty it stands for ten lines away from the other arg..*$prompt $"\ + { pass "help list" } + -re "$prompt $" { fail "help list" } + timeout { fail "(timeout) help list" } + } + + +# test help load +send "help load\n" +expect { + -re "Dynamically load FILE into the running program, and record its symbols.* +for access from GDB..*$prompt $"\ + { pass "help load" } + -re "$prompt $" { fail "help load" } + timeout { fail "(timeout) help load" } + } + + +# test help make +send "help make\n" +expect { + -re "Run the ``make'' program using the rest of the line as arguments..*$prompt $"\ + { pass "help make" } + -re "$prompt $" { fail "help make" } + timeout { fail "(timeout) help make" } + } + + +# test help next "n" abbreviation +send "help n\n" +expect { + -re "Step program, proceeding through subroutine calls..* +Like the \"step\" command as long as subroutine calls do not happen;.* +when they do, the call is treated as one instruction..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help next \"n\" abbreviation" } + -re "$prompt $" { fail "help next \"n\" abbreviation" } + timeout { fail "(timeout) help next \"n\" abbreviation" } + } + + +# test help next +send "help next\n" +expect { + -re "Step program, proceeding through subroutine calls..* +Like the \"step\" command as long as subroutine calls do not happen;.* +when they do, the call is treated as one instruction..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help next" } + -re "$prompt $" { fail "help next" } + timeout { fail "(timeout) help next" } + } + + +# test help nexti +send "help ni\n" +expect { + -re "Step one instruction, but proceed through subroutine calls..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help nexti" } + -re "$prompt $" { fail "help nexti" } + timeout { fail "(timeout) help nexti" } + } + + +# all the commands that used to be here are now in "maintainance" instead +# test help obscure +send "help obscure\n" +expect { + -re "Obscure features..* +List of commands:.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help obscure" } + -re "$prompt $" { fail "help obscure" } + timeout { fail "(timeout) help obscure" } + } + + +# test help output +send "help output\n" +expect { + -re "Like \"print\" but don't put in value history and don't print newline..* +This is useful in user-defined commands..*$prompt $"\ + { pass "help output" } + -re "$prompt $" { fail "help output" } + timeout { fail "(timeout) help output" } + } + + +# test help print "p" abbreviation +send "help p\n" +expect { + -re "Print value of expression EXP..* +Variables accessible are those of the lexical environment of the selected.* +EXP may be preceded with /FMT, where FMT is a format letter.* +but no count or size letter .see \"x\" command...*$prompt $"\ + { pass "help print \"p\" abbreviation" } + -re "$prompt $" { fail "help print \"p\" abbreviation" } + timeout { fail "(timeout) help print \"p\" abbreviation" } + } + + +# test help print +send "help print\n" +expect { + -re "Print value of expression EXP..* +Variables accessible are those of the lexical environment of the selected.* +EXP may be preceded with /FMT, where FMT is a format letter.* +but no count or size letter .see \"x\" command...*$prompt $"\ + { pass "help print" } + -re "$prompt $" { fail "help print" } + timeout { fail "(timeout) help print" } + } + + +# test help path +send "help path\n" +expect { + -re "Add directory DIR.s. to beginning of search path for object files..* +.cwd in the path means the current working directory..* +This path is equivalent to the .PATH shell variable. It is a list of.* +directories, separated by colons. These directories are searched to find.* +fully linked executable files and separately compiled object files as needed..*$prompt $"\ + { pass "help path" } + -re "$prompt $" { fail "help path" } + timeout { fail "(timeout) help path" } + } + + +# test help printcmds +send "help printcmds\n" +expect { + -re "Undefined command: \"printcmds\". Try \"help\"..*$prompt $"\ + { pass "help printcmds" } + -re "$prompt $" { fail "help printcmds" } + timeout { fail "(timeout) help printcmds" } + } + + +# test help printf +send "help printf\n" +expect { + -re "printf \"printf format string\", arg1, arg2, arg3, ..., argn.* +This is useful for formatted output in user-defined commands..*$prompt $"\ + { pass "help printf" } + -re "$prompt $" { fail "help printf" } + timeout { fail "(timeout) help printf" } + } + + +# this command doesn't exist in GDB 4.5.8 +# test help printsyms +#send "help printsyms\n" +#expect { +# -re "Print dump of current symbol definitions to file OUTFILE..* +#If a SOURCE file is specified, dump only that file's symbols..*$prompt $"\ +# { pass "help printsyms" } +# -re "$prompt $" { fail "help printsyms" } +# timeout { fail "(timeout) help printsyms" } +# } + +# test help ptype +send "help ptype\n" +expect { + -re "Print definition of type.*$prompt $"\ + { pass "help ptype" } + -re "$prompt $" { fail "help ptype" } + timeout { fail "(timeout) help ptype" } + } + + +# test help pwd +send "help pwd\n" +expect { + -re "Print working directory. This is used for your program as well..*$prompt $"\ + { pass "help pwd" } + -re "$prompt $" { fail "help pwd" } + timeout { fail "(timeout) help pwd" } + } + + +# test help quit "q" abbreviation +send "help q\n" +expect { + -re "Exit gdb..*$prompt $"\ + { pass "help quit \"q\" abbreviation" } + -re "$prompt $" { fail "help quit \"q\" abbreviation" } + timeout { fail "(timeout) help quit \"q\" abbreviation" } + } + + +# test help quit +send "help quit\n" +expect { + -re "Exit gdb..*$prompt $"\ + { pass "help quit" } + -re "$prompt $" { fail "help quit" } + timeout { fail "(timeout) help quit" } + } + + +# test help run "r" abbreviation +send "help r\n" +expect { + -re "Start debugged program. You may specify arguments to give it..* +Args may include .*, or .*; they are expanded using \"sh\"..* +Input and output redirection with \".\", \".\", or \"..\" are also allowed..* +With no arguments, uses arguments last specified .with \"run\" or \"set args\"...* +To cancel previous arguments and run with no arguments,.* +use \"set args\" without arguments..*$prompt $"\ + { pass "help run \"r\" abbreviation" } + -re "$prompt $" { fail "help run \"r\" abbreviation" } + timeout { fail "(timeout) help run \"r\" abbreviation" } + } + + +# test help run +send "help run\n" +expect { + -re "Start debugged program. You may specify arguments to give it..* +Args may include .*, or .*; they are expanded using \"sh\"..* +Input and output redirection with \".\", \".\", or \"..\" are also allowed..* +With no arguments, uses arguments last specified .with \"run\" or \"set args\"...* +To cancel previous arguments and run with no arguments,.* +use \"set args\" without arguments..*$prompt $"\ + { pass "help run" } + -re "$prompt $" { fail "help run" } + timeout { fail "(timeout) help run" } + } + + +# test help rbreak +send "help rbreak\n" +expect { + -re "Set a breakpoint for all functions matching REGEXP..*$prompt $"\ + { pass "help rbreak" } + -re "$prompt $" { fail "help rbreak" } + timeout { fail "(timeout) help rbreak" } + } + + +# test help return +send "help return\n" +expect { + -re "Make selected stack frame return to its caller..* +Control remains in the debugger, but when you continue.* +execution will resume in the frame above the one now selected..* +If an argument is given, it is an expression for the value to return..*$prompt $"\ + { pass "help return" } + -re "$prompt $" { fail "help return" } + timeout { fail "(timeout) help return" } + } + + +# test help reverse-search +send "help reverse-search\n" +expect { + -re "Search backward for regular expression .see regex.3.. from last line listed..*$prompt $"\ + { pass "help reverse-search" } + -re "$prompt $" { fail "help reverse-search" } + timeout { fail "(timeout) help reverse-search" } + } + + +# test help running +send "help running\n" +expect { + -re "Running the program..* +List of commands:.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help running" } + -re "$prompt $" { fail "help running" } + timeout { fail "(timeout) help running" } + } + + +# test help step "s" abbreviation +send "help s\n" +expect { + -re "Step program until it reaches a different source line..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help step \"s\" abbreviation" } + -re "$prompt $" { fail "help step \"s\" abbreviation" } + timeout { fail "(timeout) help step \"s\" abbreviation" } + } + + +# test help step +send "help step\n" +expect { + -re "Step program until it reaches a different source line..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help step" } + -re "$prompt $" { fail "help step" } + timeout { fail "(timeout) help step" } + } + + +# test help search +send "help search\n" +expect { + -re "Search for regular expression .see regex.3.. from last line listed..*$prompt $"\ + { pass "help search" } + -re "$prompt $" { fail "help search" } + timeout { fail "(timeout) help search" } + } + + +# test help section +send "help section\n" +expect { + -re "Change the base address of section SECTION of the exec file to ADDR..* +This can be used if the exec file does not contain section addresses,.* +.such as in the a.out format., or when the addresses specified in the.* +file itself are wrong. Each section must be changed separately. The.* +``info files'' command lists all the sections and their addresses..*$prompt $"\ + { pass "help section" } + -re "$prompt $" { fail "help section" } + timeout { fail "(timeout) help section" } + } + + +# test help set args +send "help set args\n" +expect { + -re "Set arguments to give program being debugged when it is started..* +Follow this command with any number of args, to be passed to the program..*$prompt $"\ + { pass "help set args" } + -re "$prompt $" { fail "help set args" } + timeout { fail "(timeout) help set args" } + } + + +# test help set check "c" abbreviation +send "help set c\n" +expect { + -re "Set the status of the type/range checker.* +List of set check subcommands:.* +set check range -- Set range checking.* +set check type -- Set type checking.* +Type \"help set check\" followed by set check subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help set check \"c\" abbreviation" } + -re "$prompt $" { fail "help set check \"c\" abbreviation" } + timeout { fail "(timeout) help set check \"c\" abbreviation" } + } + + +# test help set check "ch" abbreviation +send "help set ch\n" +expect { + -re "Set the status of the type/range checker.* +List of set check subcommands:.* +set check range -- Set range checking.* +set check type -- Set type checking.* +Type \"help set check\" followed by set check subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help set check \"ch\" abbreviation" } + -re "$prompt $" { fail "help set check \"ch\" abbreviation" } + timeout { fail "(timeout) help set check \"ch\" abbreviation" } + } + + +# test help set check +send "help set check\n" +expect { + -re "Set the status of the type/range checker.* +List of set check subcommands:.* +set check range -- Set range checking.* +set check type -- Set type checking.* +Type \"help set check\" followed by set check subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help set check" } + -re "$prompt $" { fail "help set check" } + timeout { fail "(timeout) help set check" } + } + + +# test help set check range +send "help set check range\n" +expect { + -re "Set range checking. .on/warn/off/auto..*$prompt $"\ + { pass "help set check range" } + -re "$prompt $" { fail "help set check range" } + timeout { fail "(timeout) help set check range" } + } + + +# test help set check type +send "help set check type\n" +expect { + -re "Set type checking. .on/warn/off/auto..*$prompt $"\ + { pass "help set check type" } + -re "$prompt $" { fail "help set check type" } + timeout { fail "(timeout) help set check type" } + } + + +# test help set complaints +send "help set complaints\n" +expect { + -re "Set max number of complaints about incorrect symbols..*$prompt $"\ + { pass "help set complaints" } + -re "$prompt $" { fail "help set complaints" } + timeout { fail "(timeout) help set complaints" } + } + + +# test help set confirm +send "help set confirm\n" +expect { + -re "Set whether to confirm potentially dangerous operations..*$prompt $"\ + { pass "help set confirm" } + -re "$prompt $" { fail "help set confirm" } + timeout { fail "(timeout) help set confirm" } + } + + +# test help set editing +send "help set editing\n" +expect { + -re "Set editing of command lines as they are typed..* +Use \"on\" to enable to enable the editing, and \"off\" to disable it..* +Without an argument, command line editing is enabled. To edit, use.* +EMACS-like or VI-like commands like control-P or ESC..*$prompt $"\ + { pass "help set editing" } + -re "$prompt $" { fail "help set editing" } + timeout { fail "(timeout) help set editing" } + } + + +# test help set environment +send "help set environment\n" +expect { + -re "Set environment variable value to give the program..* +Arguments are VAR VALUE where VAR is variable name and VALUE is value..* +VALUES of environment variables are uninterpreted strings..* +This does not affect the program until the next \"run\" command..*$prompt $"\ + { pass "help set environment" } + -re "$prompt $" { fail "help set environment" } + timeout { fail "(timeout) help set environment" } + } + + +# test help set height +send "help set height\n" +expect { + -re "Set number of lines gdb thinks are in a page..*$prompt $"\ + { pass "help set height" } + -re "$prompt $" { fail "help set height" } + timeout { fail "(timeout) help set height" } + } + + +# test help set history expansion +send "help set history expansion\n" +expect { + -re "Set history expansion on command input..* +Without an argument, history expansion is enabled..*$prompt $"\ + { pass "help set history expansion" } + -re "$prompt $" { fail "help set history expansion" } + timeout { fail "(timeout) help set history expansion" } + } + + +# test help set history filename +send "help set history filename\n" +expect { + -re "Set the filename in which to record the command history.* + .the list of previous commands of which a record is kept...*$prompt $"\ + { pass "help set history filename" } + -re "$prompt $" { fail "help set history filename" } + timeout { fail "(timeout) help set history filename" } + } + + +# test help set history save +send "help set history save\n" +expect { + -re "Set saving of the history record on exit..* +Use \"on\" to enable to enable the saving, and \"off\" to disable it..* +Without an argument, saving is enabled..*$prompt $"\ + { pass "help set history save" } + -re "$prompt $" { fail "help set history save" } + timeout { fail "(timeout) help set history save" } + } + + +# test help set history size +send "help set history size\n" +expect { + -re "Set the size of the command history, .* +ie. the number of previous commands to keep a record of..*$prompt $"\ + { pass "help set history size" } + -re "$prompt $" { fail "help set history size" } + timeout { fail "(timeout) help set history size" } + } + + +# test help set history +send "help set history\n" +expect { + -re "Generic command for setting command history parameters..* +List of set history subcommands:.* +set history filename -- Set the filename in which to record the command history.* +set history size -- Set the size of the command history.* +set history save -- Set saving of the history record on exit.* +set history expansion -- Set history expansion on command input.* +Type \"help set history\" followed by set history subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help set history" } + -re "$prompt $" { fail "help set history" } + timeout { fail "(timeout) help set history" } + } + + +# test help set language +send "help set language\n" +expect { + -re "Set the current source language..*$prompt $"\ + { pass "help set language" } + -re "$prompt $" { fail "help set language" } + timeout { fail "(timeout) help set language" } + } + + +# test help set listsize +send "help set listsize\n" +expect { + -re "Set number of source lines gdb will list by default..*$prompt $"\ + { pass "help set listsize" } + -re "$prompt $" { fail "help set listsize" } + timeout { fail "(timeout) help set listsize" } + } + + +# test help set print "p" abbreviation +# FIXME -- Ultrix hangs randomly on this very long output from gdb and +# continues with its output only if something is sent to gdb. +# This behaviour throws expect and gdb out of sync, so we better skip this +# test. +# Also, if the system is slow, it may time out because the output is large. +# Just skip the test rather than bothering with increasing the timeout. +if 0 then { +send "help set p\n" +expect { + -re ".* +Generic command for setting how things print..* +List of set print subcommands:.* +Type \"help set print\" followed by set print subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help set print \"p\" abbreviatio" } + -re "$prompt $" { fail "help set print \"p\" abbreviatio" } + timeout { fail "(timeout) help set print \"p\" abbreviatio" } + } + +# test help set print "pr" abbreviation +send "help set pr\n" +expect { + -re ".* +Generic command for setting how things print..* +List of set print subcommands:.* +Type \"help set print\" followed by set print subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help set print \"pr\" abbreviation" } + -re "$prompt $" { fail "help set print \"pr\" abbreviation" } + timeout { fail "(timeout) help set print \"pr\" abbreviation" } + } + + +# test help set print +send "help set print\n" +expect { + -re ".* +Generic command for setting how things print..* +List of set print subcommands:.* +Type \"help set print\" followed by set print subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help set print" } + -re "$prompt $" { fail "help set print" } + timeout { fail "(timeout) help set print" } + } +} + +# test help set print address +send "help set print address\n" +expect { + -re "Set printing of addresses..*$prompt $"\ + { pass "help set print address" } + -re "$prompt $" { fail "help set print address" } + timeout { fail "(timeout) help set print address" } + } + + +# test help set print array +send "help set print array\n" +expect { + -re "Set prettyprinting of arrays..*$prompt $"\ + { pass "help set print array" } + -re "$prompt $" { fail "help set print array" } + timeout { fail "(timeout) help set print array" } + } + + +# test help set print asm-demangle +send "help set print asm-demangle\n" +expect { + -re "Set demangling of C\[+\]+ names in disassembly listings..*$prompt $"\ + { pass "help set print asm-demangle" } + -re "$prompt $" { fail "help set print asm-demangle" } + timeout { fail "(timeout) help set print asm-demangle" } + } + + +# test help set print demangle +send "help set print demangle\n" +expect { + -re "Set demangling of encoded C\[+\]+ names when displaying symbols..*$prompt $"\ + { pass "help set print demangle" } + -re "$prompt $" { fail "help set print demangle" } + timeout { fail "(timeout) help set print demangle" } + } + + +# test help set print elements +send "help set print elements\n" +expect { + -re "Set limit on string chars or array elements to print..* +\"set print elements 0\" causes there to be no limit..*$prompt $"\ + { pass "help set print elements" } + -re "$prompt $" { fail "help set print elements" } + timeout { fail "(timeout) help set print elements" } + } + + +# test help set print object +send "help set print object\n" +expect { + -re "Set printing of object's derived type based on vtable info..*$prompt $"\ + { pass "help set print object" } + -re "$prompt $" { fail "help set print object" } + timeout { fail "(timeout) help set print object" } + } + + +# test help set print pretty +send "help set print pretty\n" +expect { + -re "Set prettyprinting of structures..*$prompt $"\ + { pass "help set print pretty" } + -re "$prompt $" { fail "help set print pretty" } + timeout { fail "(timeout) help set print pretty" } + } + + +# test help set print sevenbit-strings +send "help set print sevenbit-strings\n" +expect { + -re "Set printing of 8-bit characters in strings as .nnn..*$prompt $"\ + { pass "help set print sevenbit-strings" } + -re "$prompt $" { fail "help set print sevenbit-strings" } + timeout { fail "(timeout) help set print sevenbit-strings" } + } + + +# test help set print union +send "help set print union\n" +expect { + -re "Set printing of unions interior to structures..*$prompt $"\ + { pass "help set print union" } + -re "$prompt $" { fail "help set print union" } + timeout { fail "(timeout) help set print union" } + } + + +# test help set print vtbl +send "help set print vtbl\n" +expect { + -re "Set printing of C\[+\]+ virtual function tables..*$prompt $"\ + { pass "help set print vtbl" } + -re "$prompt $" { fail "help set print vtbl" } + timeout { fail "(timeout) help set print vtbl" } + } + + +# test help set prompt +send "help set prompt\n" +expect { + -re "Set gdb's prompt.*$prompt $"\ + { pass "help set prompt" } + -re "$prompt $" { fail "help set prompt" } + timeout { fail "(timeout) help set prompt" } + } + + +# test help set radix +send "help set radix\n" +expect { + -re "Set default input and output number radices.* +Use \'set input-radix\' or \'set output-radix\' to independently set each..* +Without an argument, sets both radices back to the default value of 10..* +.*$prompt $"\ + { pass "help set radix" } + -re "Set default input and output number radix..*$prompt $"\ + { fail "help set radix (obsolete radix support)" } + -re "$prompt $" { fail "help set radix" } + timeout { fail "(timeout) help set radix" } + } + + +# test help set symbol-reloading +send "help set symbol-reloading\n" +expect { + -re "Set dynamic symbol table reloading multiple times in one run..*$prompt $"\ + { pass "help set symbol-reloading" } + -re "$prompt $" { fail "help set symbol-reloading" } + timeout { fail "(timeout) help set symbol-reloading" } + } + + +# test help set variable +send "help set variable\n" +expect { + -re ".* +Evaluate expression EXP and assign result to variable VAR, using assignment.* +syntax appropriate for the current language .VAR = EXP or VAR := EXP for.* +example.. VAR may be a debugger \"convenience\" variable .names starting.* +with \\\$., a register .a few standard names starting with \\\$., or an actual.* +variable in the program being debugged. EXP is any valid expression.* +This may usually be abbreviated to simply \"set\"..*$prompt $"\ + { pass "help set variable" } + -re "$prompt $" { fail "help set variable" } + timeout { fail "(timeout) help set variable" } + } + + +# test help set verbose +send "help set verbose\n" +expect { + -re "Set verbosity..*$prompt $"\ + { pass "help set verbose" } + -re "Set verbose printing of informational messages.*$prompt $"\ + { pass "help set verbose. FIXME" } + -re "$prompt $" { fail "help set verbose" } + timeout { fail "(timeout) help set verbose" } + } + + +#test help set width +send "help set width\n" +expect { + -re "Set number of characters gdb thinks are in a line..*$prompt $"\ + { pass "help set width" } + -re "$prompt $" { fail "help set width" } + timeout { fail "(timeout) help set width" } + } + + +# test help set write +# This is only supported on targets which use exec.o. +if ![istarget "rs6000-*-*"] then { + send "help set write\n" + expect { + -re "Set writing into executable and core files..*$prompt $"\ + { pass "help set write" } + -re "$prompt $" { fail "help set write" } + timeout { fail "(timeout) help set write" } + } +} + +# test help set +# FIXME -- Ultrix hangs randomly on this very long output from gdb and +# continues with its output only if something is sent to gdb. +# This behaviour throws expect and gdb out of sync, so we better skip this +# test. +# Also, if the system is slow, it may time out because the output is large. +# Just skip the test rather than bothering with increasing the timeout. +if 0 then { +if ![istarget "*-*-ultrix*"] then { + send "help set\n" + expect { + -re ".* +Evaluate expression EXP and assign result to variable VAR, using assignment.* +syntax appropriate for the current language .VAR = EXP or VAR := EXP for.* +example.. VAR may be a debugger \"convenience\" variable .names starting.* +with \\\$., a register .a few standard names starting with \\\$., or an actual.* +variable in the program being debugged. EXP is any valid expression.* +set listsize -- Set number of source lines gdb will list by default.* +Type \"help set\" followed by set subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..* +$prompt $"\ + { pass "help set" } + -re "$prompt $" { fail "help set" } + timeout { fail "(timeout) help set" } + } +} +} + +# test help shell +send "help shell\n" +expect { + -re "Execute the rest of the line as a shell command. .* +With no arguments, run an inferior shell..*$prompt $"\ + { pass "help shell" } + -re "$prompt $" { fail "help shell" } + timeout { fail "(timeout) help shell" } + } + + +# test help show args +send "help show args\n" +expect { + -re "Show arguments to give program being debugged when it is started..* +Follow this command with any number of args, to be passed to the program..*$prompt $"\ + { pass "help show args" } + -re "$prompt $" { fail "help show args" } + timeout { fail "(timeout) help show args" } + } + + +# test help show check "c" abbreviation +send "help show c\n" +expect { + -re "Show the status of the type/range checker.* +List of show check subcommands:.* +show check range -- Show range checking.* +show check type -- Show type checking.* +Type \"help show check\" followed by show check subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help show check \"c\" abbreviation" } + -re "$prompt $" { fail "help show check \"c\" abbreviation" } + timeout { fail "(timeout) help show check \"c\" abbreviation" } + } + + +# test help show check +send "help show check\n" +expect { + -re "Show the status of the type/range checker.* +List of show check subcommands:.* +show check range -- Show range checking.* +show check type -- Show type checking.* +Type \"help show check\" followed by show check subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help show check" } + -re "$prompt $" { fail "help show check" } + timeout { fail "(timeout) help show check" } + } + + +# test help show check range +send "help show check range\n" +expect { + -re "Show range checking. .on/warn/off/auto..*$prompt $"\ + { pass "help show check range" } + -re "$prompt $" { fail "help show check range" } + timeout { fail "(timeout) help show check range" } + } + + +# test help show check type +send "help show check type\n" +expect { + -re "Show type checking. .on/warn/off/auto..*$prompt $"\ + { pass "help show check type" } + -re "$prompt $" { fail "help show check type" } + timeout { fail "(timeout) help show check type" } + } + + +# test help show commands +send "help show commands\n" +expect { + -re "Show the the history of commands you typed..* +You can supply a command number to start with, or a `\[+\]' to start after.* +the previous command number shown..*$prompt $"\ + { pass "help show commands" } + -re "$prompt $" { fail "help show commands" } + timeout { fail "(timeout) help show commands" } + } + + +# test help show complaints +send "help show complaints\n" +expect { + -re "Show max number of complaints about incorrect symbols..*$prompt $"\ + { pass "help show complaints" } + -re "$prompt $" { fail "help show complaints" } + timeout { fail "(timeout) help show complaints" } + } + + +# test help show confirm +send "help show confirm\n" +expect { + -re "Show whether to confirm potentially dangerous operations..*$prompt $"\ + { pass "help show confirm" } + -re "$prompt $" { fail "help show confirm" } + timeout { fail "(timeout) help show confirm" } + } + + +# test help show convenience +send "help show convenience\n" +expect { + -re "Debugger convenience .\".foo\". variables..* +These variables are created when you assign them values;.* +thus, \"print .foo=1\" gives \".foo\" the value 1. Values may be any type..* +A few convenience variables are given values automatically:.* +\"._\"holds the last address examined with \"x\" or \"info lines\",.* +\".__\" holds the contents of the last address examined with \"x\"..*$prompt $"\ + { pass "help show convenience" } + -re "$prompt $" { fail "help show convenience" } + timeout { fail "(timeout) help show convenience" } + } + + +# test help show directories +send "help show directories\n" +expect { + -re "Current search path for finding source files..* +.cwd in the path means the current working directory..* +.cdir in the path means the compilation directory of the source file..*$prompt $"\ + { pass "help show directories" } + -re "$prompt $" { fail "help show directories" } + timeout { fail "(timeout) help show directories" } + } + + +# test help show editing +send "help show editing\n" +expect { + -re "Show editing of command lines as they are typed..* +Use \"on\" to enable to enable the editing, and \"off\" to disable it..* +Without an argument, command line editing is enabled. To edit, use.* +EMACS-like or VI-like commands like control-P or ESC..*$prompt $"\ + { pass "help show editing" } + -re "$prompt $" { fail "help show editing" } + timeout { fail "(timeout) help show editing" } + } + + +# test help show environment +send "help show environment\n" +expect { + -re "The environment to give the program, or one variable's value..* +With an argument VAR, prints the value of environment variable VAR to.* +give the program being debugged. With no arguments, prints the entire.* +environment to be given to the program..*$prompt $"\ + { pass "help show environment" } + -re "$prompt $" { fail "help show environment" } + timeout { fail "(timeout) help show environment" } + } + + +# test help show height +send "help show height\n" +expect { + -re "Show number of lines gdb thinks are in a page..*$prompt $"\ + { pass "help show height" } + -re "$prompt $" { fail "help show height" } + timeout { fail "(timeout) help show height" } + } + + +# test help show history expansion +send "help show history expansion\n" +expect { + -re "Show history expansion on command input..* +Without an argument, history expansion is enabled..*$prompt $"\ + { pass "help show history expansion" } + -re "$prompt $" { fail "help show history expansion" } + timeout { fail "(timeout) help show history expansion" } + } + + +# test help show history filename +send "help show history filename\n" +expect { + -re "Show the filename in which to record the command history.* + .the list of previous commands of which a record is kept...*$prompt $"\ + { pass "help show history filename" } + -re "$prompt $" { fail "help show history filename" } + timeout { fail "(timeout) help show history filename" } + } + + +# test help show history save +send "help show history save\n" +expect { + -re "Show saving of the history record on exit..* +Use \"on\" to enable to enable the saving, and \"off\" to disable it..* +Without an argument, saving is enabled..*$prompt $"\ + { pass "help show history save" } + -re "$prompt $" { fail "help show history save" } + timeout { fail "(timeout) help show history save" } + } + + +# test help show history size +send "help show history size\n" +expect { + -re "Show the size of the command history, .* +ie. the number of previous commands to keep a record of..*$prompt $"\ + { pass "help show history size" } + -re "$prompt $" { fail "help show history size" } + timeout { fail "(timeout) help show history size" } + } + + +# test help show history +send "help show history\n" +expect { + -re "Generic command for showing command history parameters..* +List of show history subcommands:.* +show history filename -- Show the filename in which to record the command history.* +show history size -- Show the size of the command history.* +show history save -- Show saving of the history record on exit.* +show history expansion -- Show history expansion on command input.* +Type \"help show history\" followed by show history subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help show history" } + -re "$prompt $" { fail "help show history" } + timeout { fail "(timeout) help show history" } + } + + +# test help show language +send "help show language\n" +expect { + -re "Show the current source language..*$prompt $"\ + { pass "help show language" } + -re "$prompt $" { fail "help show language" } + timeout { fail "(timeout) help show language" } + } + + +# test help show listsize +send "help show listsize\n" +expect { + -re "Show number of source lines gdb will list by default..*$prompt $"\ + { pass "help show listsize" } + -re "$prompt $" { fail "help show listsize" } + timeout { fail "(timeout) help show listsize" } + } + + +# test help show print "p" abbreviation +send "help show p\n" +expect { + -re "Generic command for showing print settings..* +List of show print subcommands:.* +Type \"help show print\" followed by show print subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help show print \"p\" abbreviation" } + -re "$prompt $" { fail "help show print \"p\" abbreviation" } + timeout { fail "(timeout) help show print \"p\" abbreviation" } + } + + +# test help show print "pr" abbreviation +send "help show pr\n" +expect { + -re "Generic command for showing print settings..* +List of show print subcommands:.* +Type \"help show print\" followed by show print subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help show print \"pr\" abbreviation" } + -re "$prompt $" { fail "help show print \"pr\" abbreviation" } + timeout { fail "(timeout) help show print \"pr\" abbreviation" } + } + + +# test help show print +send "help show print\n" +expect { + -re "Generic command for showing print settings..* +List of show print subcommands:.* +Type \"help show print\" followed by show print subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help show print" } + -re "$prompt $" { fail "help show print" } + timeout { fail "(timeout) help show print" } + } + + +# test help show paths +send "help show paths\n" +expect { + -re "Current search path for finding object files..* +.cwd in the path means the current working directory..* +This path is equivalent to the .PATH shell variable. It is a list of.* +directories, separated by colons. These directories are searched to find.* +fully linked executable files and separately compiled object files as needed..*$prompt $"\ + { pass "help show paths" } + -re "$prompt $" { fail "help show paths" } + timeout { fail "(timeout) help show paths" } + } + + +# test help show print address +send "help show print address\n" +expect { + -re "Show printing of addresses..*$prompt $"\ + { pass "help show print address" } + -re "$prompt $" { fail "help show print address" } + timeout { fail "(timeout) help show print address" } + } + + +# test help show print array +send "help show print array\n" +expect { + -re "Show prettyprinting of arrays..*$prompt $"\ + { pass "help show print array" } + -re "$prompt $" { fail "help show print array" } + timeout { fail "(timeout) help show print array" } + } + + +# test help show print asm-demangle +send "help show print asm-demangle\n" +expect { + -re "Show demangling of C\[+\]+ names in disassembly listings..*$prompt $"\ + { pass "help show print asm-demangle" } + -re "$prompt $" { fail "help show print asm-demangle" } + timeout { fail "(timeout) help show print asm-demangle" } + } + + +# test help show print demangle +send "help show print demangle\n" +expect { + -re "Show demangling of encoded C\[+\]+ names when displaying symbols..*$prompt $"\ + { pass "help show print demangle" } + -re "$prompt $" { fail "help show print demangle" } + timeout { fail "(timeout) help show print demangle" } + } + + +# test help show print elements +send "help show print elements\n" +expect { + -re "Show limit on string chars or array elements to print..* +\"set print elements 0\" causes there to be no limit..*$prompt $"\ + { pass "help show print elements" } + -re "$prompt $" { fail "help show print elements" } + timeout { fail "(timeout) help show print elements" } + } + + +# test help show print object +send "help show print object\n" +expect { + -re "Show printing of object's derived type based on vtable info..*$prompt $"\ + { pass "help show print object" } + -re "$prompt $" { fail "help show print object" } + timeout { fail "(timeout) help show print object" } + } + + +# test help show print pretty +send "help show print pretty\n" +expect { + -re "Show prettyprinting of structures..*$prompt $"\ + { pass "help show print pretty" } + -re "$prompt $" { fail "help show print pretty" } + timeout { fail "(timeout) help show print pretty" } + } + + +# test help show print sevenbit-strings +send "help show print sevenbit-strings\n" +expect { + -re "Show printing of 8-bit characters in strings as .nnn..*$prompt $"\ + { pass "help show print sevenbit-strings" } + -re "$prompt $" { fail "help show print sevenbit-strings" } + timeout { fail "(timeout) help show print sevenbit-strings" } + } + + +# test help show print union +send "help show print union\n" +expect { + -re "Show printing of unions interior to structures..*$prompt $"\ + { pass "help show print union" } + -re "$prompt $" { fail "help show print union" } + timeout { fail "(timeout) help show print union" } + } + + +# test help show print vtbl +send "help show print vtbl\n" +expect { + -re "Show printing of C\[+\]+ virtual function tables..*$prompt $"\ + { pass "help show print vtbl" } + -re "$prompt $" { fail "help show print vtbl" } + timeout { fail "(timeout) help show print vtbl" } + } + + +# test help show prompt +send "help show prompt\n" +expect { + -re "Show gdb's prompt.*$prompt $"\ + { pass "help show prompt" } + -re "$prompt $" { fail "help show prompt" } + timeout { fail "(timeout) help show prompt" } + } + + +# test help show radix +send "help show radix\n" +expect { + -re "Show the default input and output number radices.* +Use \'show input-radix\' or \'show output-radix\' to independently show each.* +$prompt $"\ + { pass "help show radix" } + -re "Show default input and output number radix..*$prompt $"\ + { fail "help show radix (obsolete radix support)" } + -re "$prompt $" { fail "help show radix" } + timeout { fail "(timeout) help show radix" } + } + + +# test help show symbol-reloading +send "help show symbol-reloading\n" +expect { + -re "Show dynamic symbol table reloading multiple times in one run..*$prompt $"\ + { pass "help show symbol-reloading" } + -re "$prompt $" { fail "help show symbol-reloading" } + timeout { fail "(timeout) help show symbol-reloading" } + } + + +# test help show user +send "help show user\n" +expect { + -re "Show definitions of user defined commands..* +Argument is the name of the user defined command..* +With no argument, show definitions of all user defined commands..*$prompt $"\ + { pass "help show user" } + -re "$prompt $" { fail "help show user" } + timeout { fail "(timeout) help show user" } + } + + +# test help show values +send "help show values\n" +expect { + -re "Elements of value history around item number IDX .or last ten...*$prompt $"\ + { pass "help show values" } + -re "$prompt $" { fail "help show values" } + timeout { fail "(timeout) help show values" } + } + + +# test help show verbose +send "help show verbose\n" +expect { + -re "Show verbosity..*$prompt $"\ + { pass "help show verbose" } + -re "Show verbose printing of informational messages..*$prompt $"\ + { pass "help show verbose. FIXME" } + -re "$prompt $" { fail "help show verbose" } + timeout { fail "(timeout) help show verbose" } + } + + +# test help show version +send "help show version\n" +expect { + -re "Show what version of GDB this is..*$prompt $"\ + { pass "help show version" } + -re "$prompt $" { fail "help show version" } + timeout { fail "(timeout) help show version" } + } + + +# test help show width +send "help show width\n" +expect { + -re "Show number of characters gdb thinks are in a line..*$prompt $"\ + { pass "help show width" } + -re "$prompt $" { fail "help show width" } + timeout { fail "(timeout) help show width" } + } + + +# test help show write +# This is only supported on targets which use exec.o. +if ![istarget "rs6000-*-*"] then { + send "help show write\n" + expect { + -re "Show writing into executable and core files..*$prompt $"\ + { pass "help show write" } + -re "$prompt $" { fail "help show write" } + timeout { fail "(timeout) help show write" } + } +} + +# test help show +send "help show\n" +expect { + -re "Generic command for showing things about the debugger..* +List of show subcommands:.* +show listsize -- Show number of source lines gdb will list by default.* +show directories -- Current search path for finding source files.* +Type \"help show\" followed by show subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help show" } + -re "$prompt $" { fail "help show" } + timeout { fail "(timeout) help show" } + } + + + +# test help step +send "help step\n" +expect { + -re "Step program until it reaches a different source line..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help step" } + -re "$prompt $" { fail "help step" } + timeout { fail "(timeout) help step" } + } + +# test help stepi "si" abbreviation +send "help si\n" +expect { + -re "Step one instruction exactly..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help stepi \"si\" abbreviation" } + -re "$prompt $" { fail "help stepi \"si\" abbreviation" } + timeout { fail "(timeout) help stepi \"si\" abbreviation" } + } + + +# test help stepi +send "help stepi\n" +expect { + -re "Step one instruction exactly..* +Argument N means do this N times .or till program stops for another reason...*$prompt $"\ + { pass "help stepi" } + -re "$prompt $" { fail "help stepi" } + timeout { fail "(timeout) help stepi" } + } + + +# test help signal +send "help signal\n" +expect { + -re "Continue program giving it signal.*$prompt $"\ + { pass "help signal" } + -re "$prompt $" { fail "help signal" } + timeout { fail "(timeout) help signal" } + } + + +# test help source +# vxgdb reads .vxgdbinit +send "help source\n" +expect { + -re "Read commands from a file named FILE..* +Note that the file \".(vx)?gdbinit\" is read automatically in this way.* +when gdb is started..*$prompt $"\ + { pass "help source" } + -re "$prompt $" { fail "help source" } + timeout { fail "(timeout) help source" } + } + + +# test help stack +send "help stack\n" +expect { + -re "Examining the stack..* +The stack is made up of stack frames. Gdb assigns numbers to stack frames.* +counting from zero for the innermost .currently executing. frame..* +At any time gdb identifies one frame as the \"selected\" frame..* +Variable lookups are done with respect to the selected frame..* +When the program being debugged stops, gdb selects the innermost frame..* +The commands below can be used to select other frames by number or address..* +List of commands:.* +bt -- Print backtrace of all stack frames.* +backtrace -- Print backtrace of all stack frames.* +select-frame -- Select a stack frame without printing anything.* +frame -- Select and print a stack frame.* +down -- Select and print stack frame called by this one.* +up -- Select and print stack frame that called this one.* +return -- Make selected stack frame return to its caller.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help stack" } + -re "$prompt $" { fail "help stack" } + timeout { fail "(timeout) help stack" } + } + + +# test help status +send "help status\n" +expect { + -re "Status inquiries..* +List of commands:.* +show -- Generic command for showing things about the debugger.* +info -- Generic command for showing things about the program being debugged.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help status" } + -re "$prompt $" { fail "help status" } + timeout { fail "(timeout) help status" } + } + + +# test help support +# FIXME -- Ultrix hangs randomly on this very long output from gdb and +# continues with its output only if something is sent to gdb. +# This behaviour throws expect and gdb out of sync, so we better skip this +# test. +# Also, if the system is slow, it may time out because the output is large. +# Just skip the test rather than bothering with increasing the timeout. +if 0 then { +send "help support\n" +expect { + -re "Support facilities..* +List of commands:.* +show confirm -- Show whether to confirm potentially dangerous operations.* +show history -- Generic command for showing command history parameters.* +down-silently -- Same as the `down' command.* +up-silently -- Same as the `up' command.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help support" } + -re "$prompt $" { fail "help support" } + timeout { fail "(timeout) help support" } + } +} + +# test help symbol-file +send "help symbol-file\n" +expect { + -re "Load symbol table from executable file FILE..* +The `file' command can also load symbol tables, as well as setting the file.* +to execute..*$prompt $"\ + { pass "help symbol-file" } + -re "$prompt $" { fail "help symbol-file" } + timeout { fail "(timeout) help symbol-file" } + } + + +# test help target child +send "help target child\n" +expect { + -re "Unix child process .started by the \"run\" command...*$prompt $"\ + { pass "help target child (non-procfs version)" } + -re "Undefined target command: \"child\". Try \"help target\"..*$prompt $"\ + { pass "help target child (procfs version)" } + -re "$prompt $" { fail "help target child" } + timeout { fail "(timeout) help target child" } + } + + +# test help target procfs +send "help target procfs\n" +expect { + -re "Unix /proc child process .started by the \"run\" command...*$prompt $"\ + { pass "help target procfs (procfs version)" } + -re "Undefined target command: \"procfs\". Try \"help target\"..*$prompt $"\ + { pass "help target procfs (non-procfs version)" } + -re "$prompt $" { fail "help target procfs" } + timeout { fail "(timeout) help target procfs" } + } + + +# test help target core +send "help target core\n" +expect { + -re "Use a core file as a target. Specify the filename of the core file..*$prompt $"\ + { pass "help target core" } + -re "Undefined target command: \"core\". Try \"help target\"..*$prompt $"\ + { pass "help target core" } + -re "$prompt $" { fail "help target core" } + timeout { fail "(timeout) help target core" } + } + + +# test help target exec +send "help target exec\n" +expect { + -re "Use an executable file as a target..* +Specify the filename of the executable file..*$prompt $"\ + { pass "help target exec" } + -re "$prompt $" { fail "help target exec" } + timeout { fail "(timeout) help target exec" } + } + + +# test help target remote +if ![istarget "*-*-udi*"] then { + send "help target remote\n" + expect { + -re "Use a remote computer via a serial line, using a gdb-specific protocol..* +Specify the serial device it is connected to .e.g. /dev/ttya...*$prompt $"\ + { pass "help target remote" } + -re "$prompt $" { fail "help target remote" } + timeout { fail "(timeout) help target remote" } + } +} + +# test help target +# the child process target may be "target child" or "target procfs" +send "help target\n" +expect { + -re "Connect to a target machine or process..* +The first argument is the type or protocol of the target machine..* +Remaining arguments are interpreted by the target protocol. For more.* +information on the arguments for a particular protocol, type.* +`help target ' followed by the protocol name..* +List of target subcommands:.* +target exec -- Use an executable file as a target.* +Type \"help target\" followed by target subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help target" } + -re "$prompt $" { fail "help target" } + timeout { fail "(timeout) help target" } + } + + +# test help tbreak +send "help tbreak\n" +expect { + -re "Set a temporary breakpoint.*$prompt $"\ + { pass "help tbreak" } + -re "$prompt $" { fail "help tbreak" } + timeout { fail "(timeout) help tbreak" } + } + + +# test help tty +send "help tty\n" +expect { + -re "Set terminal for future runs of program being debugged..*$prompt $"\ + { pass "help tty" } + -re "$prompt $" { fail "help tty" } + timeout { fail "(timeout) help tty" } + } + + +# test help until "u" abbreviation +send "help u\n" +expect { + -re "Execute until the program reaches a source line greater than the current.* +or a specified line or address or function .same args as break command...* +Execution will also stop upon exit from the current stack frame..*$prompt $"\ + { pass "help until \"u\" abbreviation" } + -re "$prompt $" { fail "help until \"u\" abbreviation" } + timeout { fail "(timeout) help until \"u\" abbreviation" } + } + + +# test help until +send "help until\n" +expect { + -re "Execute until the program reaches a source line greater than the current.* +or a specified line or address or function .same args as break command...* +Execution will also stop upon exit from the current stack frame..*$prompt $"\ + { pass "help until" } + -re "$prompt $" { fail "help until" } + timeout { fail "(timeout) help until" } + } + + +# test help undisplay +send "help undisplay\n" +expect { + -re "Cancel some expressions to be displayed when program stops..* +Arguments are the code numbers of the expressions to stop displaying..* +No argument means cancel all automatic-display expressions..* +\"delete display\" has the same effect as this command..* +Do \"info display\" to see current list of code numbers..*$prompt $"\ + { pass "help undisplay" } + -re "$prompt $" { fail "help undisplay" } + timeout { fail "(timeout) help undisplay" } + } + + +# test help unset environment +send "help unset environment\n" +expect { + -re "Cancel environment variable VAR for the program..* +This does not affect the program until the next \"run\" command..*$prompt $"\ + { pass "help unset environment" } + -re "$prompt $" { fail "help unset environment" } + timeout { fail "(timeout) help unset environment" } + } + + +# test help unset +send "help unset\n" +expect { + -re "Complement to certain \"set\" commands.* +List of unset subcommands:.* +unset environment -- Cancel environment variable VAR for the program.* +Type \"help unset\" followed by unset subcommand name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help unset" } + -re "$prompt $" { fail "help unset" } + timeout { fail "(timeout) help unset" } + } + + +# test help up +send "help up\n" +expect { + -re "Select and print stack frame that called this one..* +An argument says how many frames up to go..*$prompt $"\ + { pass "help up" } + -re "$prompt $" { fail "help up" } + timeout { fail "(timeout) help up" } + } + + +# test help up-silently +send "help up-silently\n" +expect { + -re "Same as the `up' command, but does not print anything..* +This is useful in command scripts..*$prompt $"\ + { pass "help up-silently" } + -re "$prompt $" { fail "help up-silently" } + timeout { fail "(timeout) help up-silently" } + } + + +# test help user-defined +send "help user-defined\n" +expect { + -re "User-defined commands..* +The commands in this class are those defined by the user..* +Use the \"define\" command to define a command..* +List of commands:.* +Type \"help\" followed by command name for full documentation..* +Command name abbreviations are allowed if unambiguous..*$prompt $"\ + { pass "help user-defined" } + -re "$prompt $" { fail "help user-defined" } + timeout { fail "(timeout) help user-defined" } + } + + +# test help watch +send "help watch\n" +expect { + -re "Set a watchpoint for an expression..* +A watchpoint stops execution of your program whenever the value of.* +an expression changes..*$prompt $"\ + { pass "help watch" } + -re "$prompt $" { fail "help watch" } + timeout { fail "(timeout) help watch" } + } + + +# test help whatis +send "help whatis\n" +expect { + -re "Print data type of expression EXP..*$prompt $"\ + { pass "help whatis" } + -re "$prompt $" { fail "help whatis" } + timeout { fail "(timeout) help whatis" } + } + + +# test help where +send "help where\n" +expect { + -re "Print backtrace of all stack frames, or innermost COUNT frames..* +With a negative argument, print outermost -COUNT frames..*$prompt $"\ + { pass "help where" } + -re "$prompt $" { fail "help where" } + timeout { fail "(timeout) help where" } + } + + +# test help x +send "help x\n" +expect { + -re "Examine memory: x/FMT ADDRESS..* +ADDRESS is an expression for the memory address to examine..* +FMT is a repeat count followed by a format letter and a size letter..* +Defaults for format and size letters are those previously used..* +Default count is 1. Default address is following last thing printed.* +with this command or \"print\"..*$prompt $"\ + { pass "help x" } + -re "$prompt $" { fail "help x" } + timeout { fail "(timeout) help x" } + } + + +# test help info bogus-gdb-command +send "help info bogus-gdb-command\n" +expect { + -re "Undefined info command: \"bogus-gdb-command\". Try \"help info\"..*$prompt $"\ + { pass "help info bogus-gdb-command" } + -re "$prompt $" { fail "help info bogus-gdb-command" } + timeout { fail "(timeout) help info bogus-gdb-command" } + } + + +# test help gotcha +send "help gotcha\n" +expect { + -re "Undefined command: \"gotcha\". Try \"help\"..*$prompt $"\ + { pass "help gotcha" } + -re "$prompt $" { fail "help gotcha" } + timeout { fail "(timeout) help gotcha" } + } + -- 2.7.4