From 06b334f08b4f0e53be64160392be4c37db28a413 Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Tue, 16 Feb 2021 14:53:30 -0600 Subject: [PATCH] net: phy: marvell: Ensure SGMII auto-negotiation is enabled for 88E1111 When 88E1111 is operating in SGMII mode, auto-negotiation should be enabled on the SGMII side so that the link will come up properly with PCSes which normally have auto-negotiation enabled. This is normally the case when the PHY defaults to SGMII mode at power-up, however if we switched it from some other mode like 1000Base-X, as may happen in some SFP module situations, it may not be, particularly for modules which have 1000Base-X auto-negotiation defaulting to disabled. Call genphy_check_and_restart_aneg on the fiber page to ensure that auto- negotiation is properly enabled on the SGMII interface. Signed-off-by: Robert Hancock Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 3238d0f..e26a5d6 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -684,16 +684,19 @@ static int m88e1111_config_aneg(struct phy_device *phydev) if (err < 0) goto error; - /* Do not touch the fiber page if we're in copper->sgmii mode */ - if (phydev->interface == PHY_INTERFACE_MODE_SGMII) - return 0; - /* Then the fiber link */ err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE); if (err < 0) goto error; - err = marvell_config_aneg_fiber(phydev); + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) + /* Do not touch the fiber advertisement if we're in copper->sgmii mode. + * Just ensure that SGMII-side autonegotiation is enabled. + * If we switched from some other mode to SGMII it may not be. + */ + err = genphy_check_and_restart_aneg(phydev, false); + else + err = marvell_config_aneg_fiber(phydev); if (err < 0) goto error; -- 2.7.4