From 05fcaeac05c56ebe5a336fe617c0a0db4dc7ae3b Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 27 Mar 2013 01:05:19 +0000 Subject: [PATCH] bnx2x: Cosmetic changes Make few alignments, comment fixes and debug messages. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index b1b034d..6cc6c63 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3738,7 +3738,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, if (((vars->line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || (vars->line_speed == SPEED_1000)) { - u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; + u16 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; an_adv |= (1<<5); /* Enable CL37 1G Parallel Detect */ @@ -4761,8 +4761,8 @@ void bnx2x_link_status_update(struct link_params *params, port_mb[port].link_status)); /* Force link UP in non LOOPBACK_EXT loopback mode(s) */ - if (bp->link_params.loopback_mode != LOOPBACK_NONE && - bp->link_params.loopback_mode != LOOPBACK_EXT) + if (params->loopback_mode != LOOPBACK_NONE && + params->loopback_mode != LOOPBACK_EXT) vars->link_status |= LINK_STATUS_LINK_UP; if (bnx2x_eee_has_cap(params)) @@ -9571,8 +9571,7 @@ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, } else { /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - for (i = 0; i < ARRAY_SIZE(reg_set); - i++) + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -12286,7 +12285,7 @@ static void bnx2x_init_bmac_loopback(struct link_params *params, bnx2x_xgxs_deassert(params); - /* set bmac loopback */ + /* Set bmac loopback */ bnx2x_bmac_enable(params, vars, 1, 1); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); @@ -12305,7 +12304,7 @@ static void bnx2x_init_emac_loopback(struct link_params *params, vars->phy_flags = PHY_XGXS_FLAG; bnx2x_xgxs_deassert(params); - /* set bmac loopback */ + /* Set bmac loopback */ bnx2x_emac_enable(params, vars, 1); bnx2x_emac_program(params, vars); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); @@ -12565,6 +12564,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) params->req_line_speed[0], params->req_flow_ctrl[0]); DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n", params->req_line_speed[1], params->req_flow_ctrl[1]); + DP(NETIF_MSG_LINK, "req_adv_flow_ctrl 0x%x\n", params->req_fc_auto_adv); vars->link_status = 0; vars->phy_link_up = 0; vars->link_up = 0; @@ -13490,8 +13490,8 @@ static void bnx2x_check_kr2_wa(struct link_params *params, } /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery - * since some switches tend to reinit the AN process and clear the - * advertised BP/NP after ~2 seconds causing the KR2 to be disabled + * Since some switches tend to reinit the AN process and clear the + * the advertised BP/NP after ~2 seconds causing the KR2 to be disabled * and recovered many times */ if (vars->check_kr2_recovery_cnt > 0) { @@ -13509,8 +13509,10 @@ static void bnx2x_check_kr2_wa(struct link_params *params, /* CL73 has not begun yet */ if (base_page == 0) { - if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { bnx2x_kr2_recovery(params, vars, phy); + DP(NETIF_MSG_LINK, "No BP\n"); + } return; } @@ -13526,7 +13528,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params, if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { if (!not_kr2_device) { DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, - next_page); + next_page); bnx2x_kr2_recovery(params, vars, phy); } return; -- 2.7.4