From 05c5f265c6f72750d2a60f75ff3cfefe47379210 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 27 Feb 2015 18:38:02 +0100 Subject: [PATCH] pinctrl: sh-pfc: Do not overwrite bias configuration After the last user of the in_pd/in_pu bias parameters of the _PCRH() macro was removed in commit 80da8e02d22caaef ("sh-pfc: r8a7740: Add bias (pull-up/down) pinconf support"), bias parameters are supposed to be configured using the generic pinctl mechanism, which calls the .set_bias() method. However, the PORTCR() macro still represents the control register as consisting of two 4-bit fields. Hence the bias configuration in the uppermost 2 bits is always overwritten with zeroes when a pin is configured for GPIO, disabling any previously configured bias. Use the variable config register macro instead, to represent the register as having 4 fields, and to make sure only the input/output control and function fields are touched. This affects R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), SH-Mobile AP4 (sh7372), and SH-Mobile AG5 (sh73a0). Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Linus Walleij --- drivers/pinctrl/sh-pfc/sh_pfc.h | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h index c837286..ed5cf41 100644 --- a/drivers/pinctrl/sh-pfc/sh_pfc.h +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h @@ -302,20 +302,21 @@ struct sh_pfc_soc_info { /* * PORTnCR macro */ -#define _PCRH(in, in_pd, in_pu, out) \ - 0, (out), (in), 0, \ - 0, 0, 0, 0, \ - 0, 0, (in_pd), 0, \ - 0, 0, (in_pu), 0 - #define PORTCR(nr, reg) \ { \ - PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \ - _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \ - PORT##nr##_FN0, PORT##nr##_FN1, \ - PORT##nr##_FN2, PORT##nr##_FN3, \ - PORT##nr##_FN4, PORT##nr##_FN5, \ - PORT##nr##_FN6, PORT##nr##_FN7 } \ + PINMUX_CFG_REG_VAR("PORT" nr "CR", reg, 8, 2, 2, 1, 3) {\ + /* PULMD[1:0], handled by .set_bias() */ \ + 0, 0, 0, 0, \ + /* IE and OE */ \ + 0, PORT##nr##_OUT, PORT##nr##_IN, 0, \ + /* SEC, not supported */ \ + 0, 0, \ + /* PTMD[2:0] */ \ + PORT##nr##_FN0, PORT##nr##_FN1, \ + PORT##nr##_FN2, PORT##nr##_FN3, \ + PORT##nr##_FN4, PORT##nr##_FN5, \ + PORT##nr##_FN6, PORT##nr##_FN7 \ + } \ } #endif /* __SH_PFC_H */ -- 2.7.4