From 03680b1e00d146df718c8a4eac34438566b70c85 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 19 Nov 2007 23:28:07 +0000 Subject: [PATCH] [MTD] [NAND] S3C2410 correctly set nFCE over resume Ensure the nFCE line is de-asserted over suspend and then re-initialised when the system resumes. This is to ensure that the NAND is kept in lowest power mode over suspend (power settings are only specified for nFCE inactive) as well as fixing the Simtec Osiris which relies on nFCE being inactive. Signed-off-by: Ben Dooks Signed-off-by: David Woodhouse --- drivers/mtd/nand/s3c2410.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 66f76e9..512acfc 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -120,6 +120,8 @@ struct s3c2410_nand_info { int sel_bit; int mtd_count; + unsigned long save_nfconf; + enum s3c_cpu_type cpu_type; }; @@ -810,6 +812,16 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm) struct s3c2410_nand_info *info = platform_get_drvdata(dev); if (info) { + info->save_nfconf = readl(info->regs + S3C2410_NFCONF); + + /* For the moment, we must ensure nFCE is high during + * the time we are suspended. This really should be + * handled by suspending the MTDs we are using, but + * that is currently not the case. */ + + writel(info->save_nfconf | info->sel_bit, + info->regs + S3C2410_NFCONF); + if (!allow_clk_stop(info)) clk_disable(info->clk); } @@ -820,11 +832,19 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm) static int s3c24xx_nand_resume(struct platform_device *dev) { struct s3c2410_nand_info *info = platform_get_drvdata(dev); + unsigned long nfconf; if (info) { clk_enable(info->clk); s3c2410_nand_inithw(info, dev); + /* Restore the state of the nFCE line. */ + + nfconf = readl(info->regs + S3C2410_NFCONF); + nfconf &= ~info->sel_bit; + nfconf |= info->save_nfconf & info->sel_bit; + writel(nfconf, info->regs + S3C2410_NFCONF); + if (allow_clk_stop(info)) clk_disable(info->clk); } -- 2.7.4