From 035cc3951797df0e1e831f9fd71b7cda63e71705 Mon Sep 17 00:00:00 2001 From: Axe Yang Date: Tue, 26 Jul 2022 14:28:40 +0800 Subject: [PATCH] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties Extend interrupts and pinctrls for SDIO wakeup interrupt feature. This feature allow SDIO devices alarm asynchronous interrupt to host even when host stop providing clock to SDIO card. An extra wakeup interrupt and pinctrl states for SDIO DAT1 pin state switching are required in this scenario. Reviewed-by: Rob Herring Signed-off-by: Axe Yang Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220726062842.18846-2-axe.yang@mediatek.com Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 50 ++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index be366ce..083d1ec 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -70,12 +70,27 @@ properties: - const: ahb_cg interrupts: - maxItems: 1 + description: + Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended + interrupt is required and be configured as wakeup source irq. + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: msdc + - const: sdio_wakeup pinctrl-names: + description: + Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin + will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this + scenario. + minItems: 2 items: - const: default - const: state_uhs + - const: state_eint pinctrl-0: description: @@ -87,6 +102,11 @@ properties: should contain uhs mode pin ctrl. maxItems: 1 + pinctrl-2: + description: + should switch dat1 pin to GPIO mode. + maxItems: 1 + assigned-clocks: description: PLL of the source clock. @@ -206,4 +226,32 @@ examples: mediatek,hs400-cmd-resp-sel-rising; }; + mmc3: mmc@11260000 { + compatible = "mediatek,mt8173-mmc"; + reg = <0x11260000 0x1000>; + clock-names = "source", "hclk"; + clocks = <&pericfg CLK_PERI_MSDC30_3>, + <&topckgen CLK_TOP_MSDC50_2_H_SEL>; + interrupt-names = "msdc", "sdio_wakeup"; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>, + <&pio 23 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default", "state_uhs", "state_eint"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_uhs>; + pinctrl-2 = <&mmc2_pins_eint>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr104; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&mt6397_vgp3_reg>; + mmc-pwrseq = <&wifi_pwrseq>; + }; + ... -- 2.7.4