From 0343379cabd1736cce291f4555d239a66813f987 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 29 May 2015 10:06:38 -0500 Subject: [PATCH] usb: dwc3: gadget: don't clear EP_BUSY too early commit e18b7975c885bc3a938b9a76daf32957ea0235fa upstream. In case of non-Isochronous transfers, we don't want to clear DWC3_EP_BUSY flag until XferComplete event. That's because XferInProgress was only enabled so we can recycle TRBs and usb_requests quicker, but there are still other pending requests being transferred. In order to make sure we don't allow for another StartTransfer command while the HW is still processing other transfers, we must keep DWC3_EP_BUSY flag set and this what this patch does. Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) Reported-by: sundeep subbaraya Tested-by: sundeep subbaraya Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 55b5edc..333a7c0 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1906,12 +1906,16 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, { unsigned status = 0; int clean_busy; + u32 is_xfer_complete; + + is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE); if (event->status & DEPEVT_STATUS_BUSERR) status = -ECONNRESET; clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); - if (clean_busy) + if (clean_busy && (is_xfer_complete || + usb_endpoint_xfer_isoc(dep->endpoint.desc))) dep->flags &= ~DWC3_EP_BUSY; /* -- 2.7.4