From 032ec49f5351e9cb242b1a1c367d14415043ab95 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 24 Nov 2011 15:46:26 +0200 Subject: [PATCH] usb: musb: drop useless board_mode usage we are compiling the driver always with full OTG capabilities, so that board_mode trick becomes useless. Signed-off-by: Felipe Balbi --- drivers/usb/musb/am35x.c | 24 ++--- drivers/usb/musb/blackfin.c | 37 ++----- drivers/usb/musb/da8xx.c | 24 ++--- drivers/usb/musb/davinci.c | 32 ++---- drivers/usb/musb/musb_core.c | 210 ++++++++++++++-------------------------- drivers/usb/musb/musb_core.h | 5 - drivers/usb/musb/musb_dsps.c | 26 ++--- drivers/usb/musb/musb_gadget.c | 83 ++++++---------- drivers/usb/musb/musb_virthub.c | 13 +-- drivers/usb/musb/omap2430.c | 11 +-- drivers/usb/musb/tusb6010.c | 28 ++---- 11 files changed, 159 insertions(+), 334 deletions(-) diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 7a95ab8..9fbe736 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -107,9 +107,8 @@ static void am35x_musb_enable(struct musb *musb) musb_writel(reg_base, CORE_INTR_MASK_SET_REG, AM35X_INTR_USB_MASK); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - musb_writel(reg_base, CORE_INTR_SRC_SET_REG, - AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT); + musb_writel(reg_base, CORE_INTR_SRC_SET_REG, + AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT); } /* @@ -173,9 +172,6 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - devctl = musb_readb(mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); @@ -192,9 +188,6 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout) { static unsigned long last_timer; - if (!is_otg_enabled(musb)) - return; - if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -271,8 +264,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -289,7 +281,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -326,7 +318,7 @@ eoi: } /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -369,8 +361,7 @@ static int am35x_musb_init(struct musb *musb) if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); /* Reset the musb */ if (data->reset) @@ -400,8 +391,7 @@ static int am35x_musb_exit(struct musb *musb) struct musb_hdrc_platform_data *plat = dev->platform_data; struct omap_musb_board_data *data = plat->board_data; - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); /* Shutdown the on-chip PHY and its PLL. */ if (data->set_phy_power) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 428e6aa..54f1b98 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -184,8 +184,8 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci) } /* Start sampling ID pin, when plug is removed from MUSB */ - if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE - || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) || + if ((musb->xceiv->state == OTG_STATE_B_IDLE + || musb->xceiv->state == OTG_STATE_A_WAIT_BCON) || (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) { mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); musb->a_wait_bcon = TIMER_DELAY; @@ -228,18 +228,13 @@ static void musb_conn_timer_handler(unsigned long _musb) val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR; musb_writeb(musb->mregs, MUSB_INTRUSB, val); - if (is_otg_enabled(musb)) - musb->xceiv->state = OTG_STATE_B_IDLE; - else - musb_writeb(musb->mregs, MUSB_POWER, MUSB_POWER_HSENAB); + musb->xceiv->state = OTG_STATE_B_IDLE; } mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); break; case OTG_STATE_B_IDLE: - - if (!is_peripheral_enabled(musb)) - break; - /* Start a new session. It seems that MUSB needs taking + /* + * Start a new session. It seems that MUSB needs taking * some time to recognize the type of the plug inserted? */ val = musb_readw(musb->mregs, MUSB_DEVCTL); @@ -295,10 +290,7 @@ static void musb_conn_timer_handler(unsigned long _musb) static void bfin_musb_enable(struct musb *musb) { - if (!is_otg_enabled(musb) && is_host_enabled(musb)) { - mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); - musb->a_wait_bcon = TIMER_DELAY; - } + /* REVISIT is this really correct ? */ } static void bfin_musb_disable(struct musb *musb) @@ -323,12 +315,6 @@ static int bfin_musb_set_power(struct usb_phy *x, unsigned mA) return 0; } -static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); -} - static int bfin_musb_vbus_status(struct musb *musb) { return 0; @@ -424,12 +410,10 @@ static int bfin_musb_init(struct musb *musb) bfin_musb_reg_init(musb); - if (is_host_enabled(musb)) { - setup_timer(&musb_conn_timer, - musb_conn_timer_handler, (unsigned long) musb); - } - if (is_peripheral_enabled(musb)) - musb->xceiv->set_power = bfin_musb_set_power; + setup_timer(&musb_conn_timer, musb_conn_timer_handler, + (unsigned long) musb); + + musb->xceiv->set_power = bfin_musb_set_power; musb->isr = blackfin_interrupt; musb->double_buffer_not_ok = true; @@ -454,7 +438,6 @@ static const struct musb_platform_ops bfin_ops = { .disable = bfin_musb_disable, .set_mode = bfin_musb_set_mode, - .try_idle = bfin_musb_try_idle, .vbus_status = bfin_musb_vbus_status, .set_vbus = bfin_musb_set_vbus, diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0f9fcec..4e4df9d 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -155,9 +155,8 @@ static void da8xx_musb_enable(struct musb *musb) musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG, - DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT); + musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG, + DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT); } /** @@ -231,9 +230,6 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - /* * There's no ID-changed IRQ, so we have no good way to tell * when to switch to the A-Default state machine (by setting @@ -263,9 +259,6 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout) { static unsigned long last_timer; - if (!is_otg_enabled(musb)) - return; - if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -333,8 +326,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & USB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -351,7 +343,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -382,7 +374,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0); /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -430,8 +422,7 @@ static int da8xx_musb_init(struct musb *musb) if (IS_ERR_OR_NULL(musb->xceiv)) goto fail; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); /* Reset the controller */ musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK); @@ -454,8 +445,7 @@ fail: static int da8xx_musb_exit(struct musb *musb) { - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); phy_off(); diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 472c8b4..8805f80 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -115,8 +115,7 @@ static void davinci_musb_enable(struct musb *musb) dma_off = 0; /* force a DRVVBUS irq so we can start polling for ID change */ - if (is_otg_enabled(musb)) - musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, + musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT); } @@ -234,10 +233,8 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - - /* There's no ID-changed IRQ, so we have no good way to tell + /* + * There's no ID-changed IRQ, so we have no good way to tell * when to switch to the A-Default state machine (by setting * the DEVCTL.SESSION flag). * @@ -315,8 +312,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err = musb->int_usb & MUSB_INTR_VBUSERROR; - err = is_host_enabled(musb) - && (musb->int_usb & MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* The Mentor core doesn't debounce VBUS as needed * to cope with device connect current spikes. This @@ -332,7 +328,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -365,8 +361,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) musb_writel(tibase, DAVINCI_USB_EOI_REG, 0); /* poll for ID change */ - if (is_otg_enabled(musb) - && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -397,8 +392,7 @@ static int davinci_musb_init(struct musb *musb) if (revision == 0) goto fail; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); davinci_musb_source_power(musb, 0, 1); @@ -419,12 +413,7 @@ static int davinci_musb_init(struct musb *musb) if (cpu_is_davinci_dm355()) { u32 deepsleep = __raw_readl(DM355_DEEPSLEEP); - if (is_host_enabled(musb)) { - deepsleep &= ~DRVVBUS_OVERRIDE; - } else { - deepsleep &= ~DRVVBUS_FORCE; - deepsleep |= DRVVBUS_OVERRIDE; - } + deepsleep &= ~DRVVBUS_FORCE; __raw_writel(deepsleep, DM355_DEEPSLEEP); } @@ -453,8 +442,7 @@ unregister: static int davinci_musb_exit(struct musb *musb) { - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); /* force VBUS off */ if (cpu_is_davinci_dm355()) { @@ -468,7 +456,7 @@ static int davinci_musb_exit(struct musb *musb) davinci_musb_source_power(musb, 0 /*off*/, 1); /* delay, to avoid problems with module reload */ - if (is_host_enabled(musb) && musb->xceiv->otg->default_a) { + if (musb->xceiv->otg->default_a) { int maxdelay = 30; u8 devctl, warn = 0; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 65b3f53..3d9b647 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -649,8 +649,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_B_PERIPHERAL: musb_g_suspend(musb); - musb->is_active = is_otg_enabled(musb) - && otg->gadget->b_hnp_enable; + musb->is_active = otg->gadget->b_hnp_enable; if (musb->is_active) { musb->xceiv->state = OTG_STATE_B_WAIT_ACON; dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n"); @@ -666,8 +665,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; break; case OTG_STATE_B_HOST: /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ @@ -755,7 +753,7 @@ b_host: case OTG_STATE_A_SUSPEND: usb_hcd_resume_root_hub(musb_to_hcd(musb)); musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) + if (musb->a_wait_bcon != 0) musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(musb->a_wait_bcon)); break; @@ -931,25 +929,16 @@ void musb_start(struct musb *musb) devctl = musb_readb(regs, MUSB_DEVCTL); devctl &= ~MUSB_DEVCTL_SESSION; - if (is_otg_enabled(musb)) { - /* session started after: - * (a) ID-grounded irq, host mode; - * (b) vbus present/connect IRQ, peripheral mode; - * (c) peripheral initiates, using SRP - */ - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->is_active = 1; - else - devctl |= MUSB_DEVCTL_SESSION; - - } else if (is_host_enabled(musb)) { - /* assume ID pin is hard-wired to ground */ + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) + musb->is_active = 1; + else devctl |= MUSB_DEVCTL_SESSION; - } else /* peripheral is enabled */ { - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->is_active = 1; - } musb_platform_enable(musb); musb_writeb(regs, MUSB_DEVCTL, devctl); } @@ -1013,8 +1002,6 @@ static void musb_shutdown(struct platform_device *pdev) musb_generic_disable(musb); spin_unlock_irqrestore(&musb->lock, flags); - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - usb_remove_hcd(musb_to_hcd(musb)); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); @@ -1885,6 +1872,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) int status; struct musb *musb; struct musb_hdrc_platform_data *plat = dev->platform_data; + struct usb_hcd *hcd; /* The driver might handle more features than the board; OK. * Fail when the board needs a feature that's not enabled. @@ -1907,7 +1895,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_enable(musb->controller); spin_lock_init(&musb->lock); - musb->board_mode = plat->mode; musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops; @@ -1978,7 +1965,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail3; } musb->nIrq = nIrq; -/* FIXME this handles wakeup irqs wrong */ + /* FIXME this handles wakeup irqs wrong */ if (enable_irq_wake(nIrq) == 0) { musb->irq_wake = 1; device_init_wakeup(dev, 1); @@ -1987,58 +1974,25 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) } /* host side needs more setup */ - if (is_host_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - otg_set_host(musb->xceiv->otg, &hcd->self); - - if (is_otg_enabled(musb)) - hcd->self.otg_port = 1; - musb->xceiv->otg->host = &hcd->self; - hcd->power_budget = 2 * (plat->power ? : 250); - - /* program PHY to use external vBus if required */ - if (plat->extvbus) { - u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); - busctl |= MUSB_ULPI_USE_EXTVBUS; - musb_write_ulpi_buscontrol(musb->mregs, busctl); - } + hcd = musb_to_hcd(musb); + otg_set_host(musb->xceiv->otg, &hcd->self); + hcd->self.otg_port = 1; + musb->xceiv->otg->host = &hcd->self; + hcd->power_budget = 2 * (plat->power ? : 250); + + /* program PHY to use external vBus if required */ + if (plat->extvbus) { + u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); + busctl |= MUSB_ULPI_USE_EXTVBUS; + musb_write_ulpi_buscontrol(musb->mregs, busctl); } - /* For the host-only role, we can activate right away. - * (We expect the ID pin to be forcibly grounded!!) - * Otherwise, wait till the gadget driver hooks up. - */ - if (!is_otg_enabled(musb) && is_host_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_IDLE; - - status = usb_add_hcd(musb_to_hcd(musb), 0, 0); - - hcd->self.uses_pio_for_control = 1; - dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n", - "HOST", status, - musb_readb(musb->mregs, MUSB_DEVCTL), - (musb_readb(musb->mregs, MUSB_DEVCTL) - & MUSB_DEVCTL_BDEVICE - ? 'B' : 'A')); - - } else /* peripheral is enabled */ { - MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; - - status = musb_gadget_setup(musb); + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; - dev_dbg(musb->controller, "%s mode, status %d, dev%02x\n", - is_otg_enabled(musb) ? "OTG" : "PERIPHERAL", - status, - musb_readb(musb->mregs, MUSB_DEVCTL)); + status = musb_gadget_setup(musb); - } if (status < 0) goto fail3; @@ -2054,28 +2008,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_put(musb->controller); - dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", - ({char *s; - switch (musb->board_mode) { - case MUSB_HOST: s = "Host"; break; - case MUSB_PERIPHERAL: s = "Peripheral"; break; - default: s = "OTG"; break; - }; s; }), - ctrl, - (is_dma_capable() && musb->dma_controller) - ? "DMA" : "PIO", - musb->nIrq); - return 0; fail5: musb_exit_debugfs(musb); fail4: - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - usb_remove_hcd(musb_to_hcd(musb)); - else - musb_gadget_cleanup(musb); + musb_gadget_cleanup(musb); fail3: pm_runtime_put_sync(musb->controller); @@ -2166,11 +2105,9 @@ static void musb_save_context(struct musb *musb) void __iomem *musb_base = musb->mregs; void __iomem *epio; - if (is_host_enabled(musb)) { - musb->context.frame = musb_readw(musb_base, MUSB_FRAME); - musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); - musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); - } + musb->context.frame = musb_readw(musb_base, MUSB_FRAME); + musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); + musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); musb->context.power = musb_readb(musb_base, MUSB_POWER); musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); @@ -2209,30 +2146,29 @@ static void musb_save_context(struct musb *musb) musb->context.index_regs[i].rxfifosz = musb_read_rxfifosz(musb_base); } - if (is_host_enabled(musb)) { - musb->context.index_regs[i].txtype = - musb_readb(epio, MUSB_TXTYPE); - musb->context.index_regs[i].txinterval = - musb_readb(epio, MUSB_TXINTERVAL); - musb->context.index_regs[i].rxtype = - musb_readb(epio, MUSB_RXTYPE); - musb->context.index_regs[i].rxinterval = - musb_readb(epio, MUSB_RXINTERVAL); - - musb->context.index_regs[i].txfunaddr = - musb_read_txfunaddr(musb_base, i); - musb->context.index_regs[i].txhubaddr = - musb_read_txhubaddr(musb_base, i); - musb->context.index_regs[i].txhubport = - musb_read_txhubport(musb_base, i); - - musb->context.index_regs[i].rxfunaddr = - musb_read_rxfunaddr(musb_base, i); - musb->context.index_regs[i].rxhubaddr = - musb_read_rxhubaddr(musb_base, i); - musb->context.index_regs[i].rxhubport = - musb_read_rxhubport(musb_base, i); - } + + musb->context.index_regs[i].txtype = + musb_readb(epio, MUSB_TXTYPE); + musb->context.index_regs[i].txinterval = + musb_readb(epio, MUSB_TXINTERVAL); + musb->context.index_regs[i].rxtype = + musb_readb(epio, MUSB_RXTYPE); + musb->context.index_regs[i].rxinterval = + musb_readb(epio, MUSB_RXINTERVAL); + + musb->context.index_regs[i].txfunaddr = + musb_read_txfunaddr(musb_base, i); + musb->context.index_regs[i].txhubaddr = + musb_read_txhubaddr(musb_base, i); + musb->context.index_regs[i].txhubport = + musb_read_txhubport(musb_base, i); + + musb->context.index_regs[i].rxfunaddr = + musb_read_rxfunaddr(musb_base, i); + musb->context.index_regs[i].rxhubaddr = + musb_read_rxhubaddr(musb_base, i); + musb->context.index_regs[i].rxhubport = + musb_read_rxhubport(musb_base, i); } } @@ -2243,11 +2179,9 @@ static void musb_restore_context(struct musb *musb) void __iomem *ep_target_regs; void __iomem *epio; - if (is_host_enabled(musb)) { - musb_writew(musb_base, MUSB_FRAME, musb->context.frame); - musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); - musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); - } + musb_writew(musb_base, MUSB_FRAME, musb->context.frame); + musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); + musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); musb_writeb(musb_base, MUSB_POWER, musb->context.power); musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe); @@ -2286,33 +2220,31 @@ static void musb_restore_context(struct musb *musb) musb->context.index_regs[i].rxfifoadd); } - if (is_host_enabled(musb)) { - musb_writeb(epio, MUSB_TXTYPE, + musb_writeb(epio, MUSB_TXTYPE, musb->context.index_regs[i].txtype); - musb_writeb(epio, MUSB_TXINTERVAL, + musb_writeb(epio, MUSB_TXINTERVAL, musb->context.index_regs[i].txinterval); - musb_writeb(epio, MUSB_RXTYPE, + musb_writeb(epio, MUSB_RXTYPE, musb->context.index_regs[i].rxtype); - musb_writeb(epio, MUSB_RXINTERVAL, + musb_writeb(epio, MUSB_RXINTERVAL, - musb->context.index_regs[i].rxinterval); - musb_write_txfunaddr(musb_base, i, + musb->context.index_regs[i].rxinterval); + musb_write_txfunaddr(musb_base, i, musb->context.index_regs[i].txfunaddr); - musb_write_txhubaddr(musb_base, i, + musb_write_txhubaddr(musb_base, i, musb->context.index_regs[i].txhubaddr); - musb_write_txhubport(musb_base, i, + musb_write_txhubport(musb_base, i, musb->context.index_regs[i].txhubport); - ep_target_regs = - musb_read_target_reg_base(i, musb_base); + ep_target_regs = + musb_read_target_reg_base(i, musb_base); - musb_write_rxfunaddr(ep_target_regs, + musb_write_rxfunaddr(ep_target_regs, musb->context.index_regs[i].rxfunaddr); - musb_write_rxhubaddr(ep_target_regs, + musb_write_rxhubaddr(ep_target_regs, musb->context.index_regs[i].rxhubaddr); - musb_write_rxhubport(ep_target_regs, + musb_write_rxhubport(ep_target_regs, musb->context.index_regs[i].rxhubport); - } } musb_writeb(musb_base, MUSB_INDEX, musb->context.index); } diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 8bb324d..5dab2da 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -71,10 +71,6 @@ struct musb_ep; #include #include "musb_host.h" -#define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) -#define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) -#define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) - /* NOTE: otg and peripheral-only state machines start at B_IDLE. * OTG or host-only go to A_IDLE when ID is sensed. */ @@ -376,7 +372,6 @@ struct musb { u16 epmask; u8 nr_endpoints; - u8 board_mode; /* enum musb_mode */ int (*board_set_power)(int state); u8 min_power; /* vbus for periph, in mA/2 */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 217808d..51ff1bb 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -137,9 +137,8 @@ static void dsps_musb_enable(struct musb *musb) dsps_writel(reg_base, wrp->epintr_set, epmask); dsps_writel(reg_base, wrp->coreintr_set, coremask); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - dsps_writel(reg_base, wrp->coreintr_set, - (1 << wrp->drvvbus) << wrp->usb_shift); + dsps_writel(reg_base, wrp->coreintr_set, + (1 << wrp->drvvbus) << wrp->usb_shift); } /** @@ -200,9 +199,6 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << wrp->usb_shift); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - devctl = dsps_readb(mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) mod_timer(&glue->timer, @@ -223,9 +219,6 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) struct dsps_glue *glue = platform_get_drvdata(pdev); static unsigned long last_timer; - if (!is_otg_enabled(musb)) - return; - if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -293,7 +286,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. * Also, DRVVBUS pulses for SRP (but not at 5V) ... */ - if ((usbintr & MUSB_INTR_BABBLE) && is_host_enabled(musb)) + if (usbintr & MUSB_INTR_BABBLE) pr_info("CAUTION: musb: Babble Interrupt Occured\n"); if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { @@ -302,8 +295,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) u8 devctl = dsps_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -321,7 +313,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { musb->is_active = 1; MUSB_HST_MODE(musb); musb->xceiv->otg->default_a = 1; @@ -352,7 +344,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) dsps_writel(reg_base, wrp->eoi, 1); /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -388,8 +380,7 @@ static int dsps_musb_init(struct musb *musb) goto err0; } - if (is_host_enabled(musb)) - setup_timer(&glue->timer, otg_timer, (unsigned long) musb); + setup_timer(&glue->timer, otg_timer, (unsigned long) musb); /* Reset the musb */ dsps_writel(reg_base, wrp->control, (1 << wrp->reset)); @@ -423,8 +414,7 @@ static int dsps_musb_exit(struct musb *musb) struct platform_device *pdev = to_platform_device(dev->parent); struct dsps_glue *glue = platform_get_drvdata(pdev); - if (is_host_enabled(musb)) - del_timer_sync(&glue->timer); + del_timer_sync(&glue->timer); /* Shutdown the on-chip PHY and its PLL. */ if (data->set_phy_power) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 5c4392b..7fb060d 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1864,8 +1864,7 @@ int __devinit musb_gadget_setup(struct musb *musb) musb->g.dev.release = musb_gadget_release; musb->g.name = musb_driver_name; - if (is_otg_enabled(musb)) - musb->g.is_otg = 1; + musb->g.is_otg = 1; musb_g_init_endpoints(musb); @@ -1911,11 +1910,14 @@ static int musb_gadget_start(struct usb_gadget *g, { struct musb *musb = gadget_to_musb(g); struct usb_otg *otg = musb->xceiv->otg; + struct usb_hcd *hcd = musb_to_hcd(musb); unsigned long flags; - int retval = -EINVAL; + int retval = 0; - if (driver->max_speed < USB_SPEED_HIGH) - goto err0; + if (driver->max_speed < USB_SPEED_HIGH) { + retval = -EINVAL; + goto err; + } pm_runtime_get_sync(musb->controller); @@ -1929,49 +1931,30 @@ static int musb_gadget_start(struct usb_gadget *g, otg_set_peripheral(otg, &musb->g); musb->xceiv->state = OTG_STATE_B_IDLE; - - /* - * FIXME this ignores the softconnect flag. Drivers are - * allowed hold the peripheral inactive until for example - * userspace hooks up printer hardware or DSP codecs, so - * hosts only see fully functional devices. - */ - - if (!is_otg_enabled(musb)) - musb_start(musb); - spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - dev_dbg(musb->controller, "OTG startup...\n"); + /* REVISIT: funcall to other code, which also + * handles power budgeting ... this way also + * ensures HdrcStart is indirectly called. + */ + retval = usb_add_hcd(hcd, 0, 0); + if (retval < 0) { + dev_dbg(musb->controller, "add_hcd failed, %d\n", retval); + goto err; + } - /* REVISIT: funcall to other code, which also - * handles power budgeting ... this way also - * ensures HdrcStart is indirectly called. - */ - retval = usb_add_hcd(musb_to_hcd(musb), 0, 0); - if (retval < 0) { - dev_dbg(musb->controller, "add_hcd failed, %d\n", retval); - goto err2; - } + if ((musb->xceiv->last_event == USB_EVENT_ID) + && otg->set_vbus) + otg_set_vbus(otg, 1); - if ((musb->xceiv->last_event == USB_EVENT_ID) - && otg->set_vbus) - otg_set_vbus(otg, 1); + hcd->self.uses_pio_for_control = 1; - hcd->self.uses_pio_for_control = 1; - } if (musb->xceiv->last_event == USB_EVENT_NONE) pm_runtime_put(musb->controller); return 0; -err2: - if (!is_otg_enabled(musb)) - musb_stop(musb); -err0: +err: return retval; } @@ -2049,16 +2032,12 @@ static int musb_gadget_stop(struct usb_gadget *g, musb_platform_try_idle(musb, 0); spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb)) { - usb_remove_hcd(musb_to_hcd(musb)); - /* FIXME we need to be able to register another - * gadget driver here and have everything work; - * that currently misbehaves. - */ - } - - if (!is_otg_enabled(musb)) - musb_stop(musb); + usb_remove_hcd(musb_to_hcd(musb)); + /* + * FIXME we need to be able to register another + * gadget driver here and have everything work; + * that currently misbehaves. + */ pm_runtime_put(musb->controller); @@ -2220,13 +2199,11 @@ __acquires(musb->lock) if (devctl & MUSB_DEVCTL_BDEVICE) { musb->xceiv->state = OTG_STATE_B_PERIPHERAL; musb->g.is_a_peripheral = 0; - } else if (is_otg_enabled(musb)) { + } else { musb->xceiv->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; - } else - WARN_ON(1); + } /* start with default limits on VBUS power draw */ - (void) musb_gadget_vbus_draw(&musb->g, - is_otg_enabled(musb) ? 8 : 100); + (void) musb_gadget_vbus_draw(&musb->g, 8); } diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 22ec3e3..f705791 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -81,8 +81,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) switch (musb->xceiv->state) { case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; if (musb->is_active) mod_timer(&musb->otg_timer, jiffies + msecs_to_jiffies( @@ -91,8 +90,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) break; case OTG_STATE_B_HOST: musb->xceiv->state = OTG_STATE_B_WAIT_ACON; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; musb_platform_try_idle(musb, 0); break; default: @@ -190,8 +188,7 @@ void musb_root_disconnect(struct musb *musb) switch (musb->xceiv->state) { case OTG_STATE_A_SUSPEND: - if (is_otg_enabled(musb) - && otg->host->b_hnp_enable) { + if (otg->host->b_hnp_enable) { musb->xceiv->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; break; @@ -273,7 +270,7 @@ int musb_hub_control( musb_port_suspend(musb, false); break; case USB_PORT_FEAT_POWER: - if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) + if (!hcd->self.is_b_host) musb_platform_set_vbus(musb, 0); break; case USB_PORT_FEAT_C_CONNECTION: @@ -369,7 +366,7 @@ int musb_hub_control( * initialization logic, e.g. for OTG, or change any * logic relating to VBUS power-up. */ - if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) + if (!hcd->self.is_b_host) musb_start(musb); break; case USB_PORT_FEAT_RESET: diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 392fc7a..e32aff9 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -258,7 +258,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) otg->default_a = true; musb->xceiv->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; - if (!is_otg_enabled(musb) || musb->gadget_driver) { + if (musb->gadget_driver) { pm_runtime_get_sync(dev); usb_phy_init(musb->xceiv); omap2430_musb_set_vbus(musb, 1); @@ -281,11 +281,10 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; - if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) - if (musb->gadget_driver) { - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - } + if (musb->gadget_driver) { + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } if (data->interface_type == MUSB_INTERFACE_UTMI) { if (musb->xceiv->otg->set_vbus) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 4073a6f..1d0c090 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -437,14 +437,13 @@ static void musb_do_idle(unsigned long _musb) if (is_host_active(musb) && (musb->port1_status >> 16)) goto done; - if (is_peripheral_enabled(musb) && !musb->gadget_driver) { + if (!musb->gadget_driver) { wakeups = 0; } else { wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS | TUSB_PRCM_WVBUS; - if (is_otg_enabled(musb)) - wakeups |= TUSB_PRCM_WID; + wakeups |= TUSB_PRCM_WID; } tusb_allow_idle(musb, wakeups); } @@ -582,21 +581,12 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) * * Note that if a mini-A cable is plugged in the ID line will stay down as * the weak ID pull-up is not able to pull the ID up. - * - * REVISIT: It would be possible to add support for changing between host - * and peripheral modes in non-OTG configurations by reconfiguring hardware - * and then setting musb->board_mode. For now, only support OTG mode. */ static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode) { void __iomem *tbase = musb->ctrl_base; u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf; - if (musb->board_mode != MUSB_OTG) { - ERR("Changing mode currently only supported in OTG mode\n"); - return -EINVAL; - } - otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL); phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE); @@ -652,10 +642,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) { int default_a; - if (is_otg_enabled(musb)) - default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); - else - default_a = is_host_enabled(musb); + default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B'); otg->default_a = default_a; tusb_musb_set_vbus(musb, default_a); @@ -669,8 +656,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) { /* B-dev state machine: no vbus ~= disconnect */ - if ((is_otg_enabled(musb) && !otg->default_a) - || !is_host_enabled(musb)) { + if (!otg->default_a) { /* ? musb_root_disconnect(musb); */ musb->port1_status &= ~(USB_PORT_STAT_CONNECTION @@ -1119,10 +1105,8 @@ static int tusb_musb_init(struct musb *musb) } musb->isr = tusb_musb_interrupt; - if (is_peripheral_enabled(musb)) { - musb->xceiv->set_power = tusb_draw_power; - the_musb = musb; - } + musb->xceiv->set_power = tusb_draw_power; + the_musb = musb; setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); -- 2.7.4