From 03245a5ee69a5faa99b020fe1aca9bafe10c46a9 Mon Sep 17 00:00:00 2001 From: Olivier Grenie Date: Fri, 4 Dec 2009 13:27:57 -0300 Subject: [PATCH] V4L/DVB (13583): DiB8090: Add the DiB0090 tuner driver and STK8096GP-board This patchs adds support for the DiBcom DiB0090 RF tuner and for DiBcom's reference design STK8096GP. Small extracts of the DiB0070 and the DiB8000-driver into a common codebase. Signed-off-by: Patrick Boettcher Signed-off-by: Olivier Grenie Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 325 +++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + drivers/media/dvb/frontends/Kconfig | 9 + drivers/media/dvb/frontends/Makefile | 1 + drivers/media/dvb/frontends/dib0070.c | 654 +++++------ drivers/media/dvb/frontends/dib0070.h | 4 +- drivers/media/dvb/frontends/dib0090.c | 1525 ++++++++++++++++++++++++++ drivers/media/dvb/frontends/dib0090.h | 114 ++ drivers/media/dvb/frontends/dib8000.c | 64 +- drivers/media/dvb/frontends/dib8000.h | 32 +- drivers/media/dvb/frontends/dibx000_common.c | 15 +- drivers/media/dvb/frontends/dibx000_common.h | 71 +- 12 files changed, 2450 insertions(+), 365 deletions(-) create mode 100644 drivers/media/dvb/frontends/dib0090.c create mode 100644 drivers/media/dvb/frontends/dib0090.h diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 923fa15..80a1263 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -18,6 +18,7 @@ #include "xc5000.h" #include "s5h1411.h" #include "dib0070.h" +#include "dib0090.h" #include "lgdt3305.h" #include "mxl5007t.h" @@ -605,17 +606,17 @@ static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, } break; default: - if (actlen != sizeof(buf)) { - /* We didn't get back the 6 byte message we expected */ - err("Unexpected RC response size [%d]", actlen); - return -1; - } + if (actlen != sizeof(buf)) { + /* We didn't get back the 6 byte message we expected */ + err("Unexpected RC response size [%d]", actlen); + return -1; + } - poll_reply.report_id = buf[0]; - poll_reply.data_state = buf[1]; + poll_reply.report_id = buf[0]; + poll_reply.data_state = buf[1]; poll_reply.system = (buf[2] << 8) | buf[3]; - poll_reply.data = buf[4]; - poll_reply.not_data = buf[5]; + poll_reply.data = buf[4]; + poll_reply.not_data = buf[5]; break; } @@ -632,7 +633,7 @@ static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, /* Find the key in the map */ for (i = 0; i < d->props.rc_key_map_size; i++) { if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) && - rc5_data(&keymap[i]) == poll_reply.data) { + rc5_data(&keymap[i]) == poll_reply.data) { *event = keymap[i].event; found = 1; break; @@ -641,8 +642,8 @@ static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, if (found == 0) { err("Unknown remote controller key: %04x %02x %02x", - poll_reply.system, - poll_reply.data, poll_reply.not_data); + poll_reply.system, + poll_reply.data, poll_reply.not_data); d->last_event = 0; return 0; } @@ -1476,12 +1477,12 @@ static struct dib8000_config dib807x_dib8000_config[2] = { } }; -static int dib807x_tuner_reset(struct dvb_frontend *fe, int onoff) +static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff) { return dib8000_set_gpio(fe, 5, 0, !onoff); } -static int dib807x_tuner_sleep(struct dvb_frontend *fe, int onoff) +static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff) { return dib8000_set_gpio(fe, 0, 0, onoff); } @@ -1494,8 +1495,8 @@ static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = { static struct dib0070_config dib807x_dib0070_config[2] = { { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib807x_tuner_reset, - .sleep = dib807x_tuner_sleep, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, .clock_khz = 12000, .clock_pad_drive = 4, .vga_filter = 1, @@ -1508,8 +1509,8 @@ static struct dib0070_config dib807x_dib0070_config[2] = { .freq_offset_khz_vhf = -100, }, { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib807x_tuner_reset, - .sleep = dib807x_tuner_sleep, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, .clock_khz = 12000, .clock_pad_drive = 2, .vga_filter = 1, @@ -1566,12 +1567,12 @@ static int dib807x_tuner_attach(struct dvb_usb_adapter *adap) return 0; } -static int stk807x_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) +static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) { return dib8000_pid_filter(adapter->fe, index, pid, onoff); } -static int stk807x_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) +static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) { return dib8000_pid_filter_ctrl(adapter->fe, onoff); } @@ -1643,6 +1644,246 @@ static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) return adap->fe == NULL ? -ENODEV : 0; } +/* STK8096GP */ +struct dibx000_agc_config dib8090_agc_config[2] = { + { + BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup + + 787,// inv_gain = 1/ 90.4dB // no boost, lower gain due to ramp quantification + 10, // time_stabiliz + + 0, // alpha_level + 118, // thlock + + 0, // wbd_inv + 3530, // wbd_ref + 1, // wbd_sel + 5, // wbd_alpha + + 65535, // agc1_max + 0, // agc1_min + + 65535, // agc2_max + 0, // agc2_min + + 0, // agc1_pt1 + 32, // agc1_pt2 + 114, // agc1_pt3 // 40.4dB + 143, // agc1_slope1 + 144, // agc1_slope2 + 114, // agc2_pt1 + 227, // agc2_pt2 + 116, // agc2_slope1 + 117, // agc2_slope2 + + 28, // alpha_mant // 5Hz with 90.2dB + 26, // alpha_exp + 31, // beta_mant + 51, // beta_exp + + 0, // perform_agc_softsplit + }, + { + BAND_CBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup + + 787,// inv_gain = 1/ 90.4dB // no boost, lower gain due to ramp quantification + 10, // time_stabiliz + + 0, // alpha_level + 118, // thlock + + 0, // wbd_inv + 3530, // wbd_ref + 1, // wbd_sel + 5, // wbd_alpha + + 0, // agc1_max + 0, // agc1_min + + 65535, // agc2_max + 0, // agc2_min + + 0, // agc1_pt1 + 32, // agc1_pt2 + 114, // agc1_pt3 // 40.4dB + 143, // agc1_slope1 + 144, // agc1_slope2 + 114, // agc2_pt1 + 227, // agc2_pt2 + 116, // agc2_slope1 + 117, // agc2_slope2 + + 28, // alpha_mant // 5Hz with 90.2dB + 26, // alpha_exp + 31, // beta_mant + 51, // beta_exp + + 0, // perform_agc_softsplit + } +}; + +static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = { + 54000, 13500, // internal, sampling + 1, 18, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass + 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo + (3 << 14) | (1 << 12) | (599 << 0), // sad_cfg: refsel, sel, freq_15k + (0 << 25) | 0, // ifreq = 0 MHz + 20199727, // timf + 12000000, // xtal_hz +}; + +static int dib8090_get_adc_power(struct dvb_frontend *fe) +{ + return dib8000_get_adc_power(fe, 1); +} + +static struct dib8000_config dib809x_dib8000_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib8090_agc_config, + .agc_control = dib0090_dcc_freq, + .pll = &dib8090_pll_config_12mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 0x31, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + .diversity_delay = 144, + .refclksel = 3, +}; + +static struct dib0090_config dib809x_dib0090_config = { + .io.pll_bypass = 1, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 20, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 12000, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, + .clkouttobamse = 1, + .analog_output = 1, + .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS, + .wbd_vhf_offset = 100, + .wbd_cband_offset = 450, + .use_pwm_agc = 1, + .clkoutdrive = 1, + .get_adc_power = dib8090_get_adc_power, + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = -143, +}; + +static int dib8096_set_param_override(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); + u16 offset; + int ret = 0; + enum frontend_tune_state tune_state = CT_SHUTDOWN; + u16 ltgain, rf_gain_limit; + + ret = state->set_param_save(fe, fep); + if (ret < 0) + return ret; + + switch (band) { + case BAND_VHF: + offset = 100; + break; + case BAND_UHF: + offset = 550; + break; + default: + offset = 0; + break; + } + offset += (dib0090_get_wbd_offset(fe) * 8 * 18 / 33 + 1) / 2; + dib8000_set_wbd_ref(fe, offset); + + + if (band == BAND_CBAND) + { + deb_info("tuning in CBAND - soft-AGC startup\n"); + /* TODO specific wbd target for dib0090 - needed for startup ? */ + dib0090_set_tune_state(fe, CT_AGC_START); + do + { + ret = dib0090_gain_control(fe); + msleep(ret); + tune_state = dib0090_get_tune_state(fe); + if (tune_state == CT_AGC_STEP_0) + dib8000_set_gpio(fe, 6, 0, 1); + else if (tune_state == CT_AGC_STEP_1) + { + dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain); + if (rf_gain_limit == 0) + dib8000_set_gpio(fe, 6, 0, 0); + } + } + while(tune_statepriv; + struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe->ops.tuner_ops.set_params; + adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override; + return 0; +} + +static int stk809x_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80); + + adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config); + + return adap->fe == NULL ? -ENODEV : 0; +} /* STK7070PD */ static struct dib7000p_config stk7070pd_dib7000p_config[2] = { @@ -1939,6 +2180,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) }, /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -2473,8 +2715,8 @@ struct dvb_usb_device_properties dib0700_devices[] = { { .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, - .pid_filter = stk807x_pid_filter, - .pid_filter_ctrl = stk807x_pid_filter_ctrl, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk807x_frontend_attach, .tuner_attach = dib807x_tuner_attach, @@ -2512,8 +2754,8 @@ struct dvb_usb_device_properties dib0700_devices[] = { { .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, - .pid_filter = stk807x_pid_filter, - .pid_filter_ctrl = stk807x_pid_filter_ctrl, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk807xpvr_frontend_attach0, .tuner_attach = dib807x_tuner_attach, @@ -2525,8 +2767,8 @@ struct dvb_usb_device_properties dib0700_devices[] = { { .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, - .pid_filter = stk807x_pid_filter, - .pid_filter_ctrl = stk807x_pid_filter_ctrl, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk807xpvr_frontend_attach1, .tuner_attach = dib807x_tuner_attach, @@ -2549,6 +2791,37 @@ struct dvb_usb_device_properties dib0700_devices[] = { .rc_key_map = dib0700_rc_keys, .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), .rc_query = dib0700_rc_query + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk809x_frontend_attach, + .tuner_attach = dib809x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK8096GP reference design", + { &dib0700_usb_id_table[67], NULL }, + { NULL }, + }, + }, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query }, }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index cf7f2b4..bc3581d 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -102,6 +102,7 @@ #define USB_PID_DIBCOM_STK7070PD 0x1ebe #define USB_PID_DIBCOM_STK807XP 0x1f90 #define USB_PID_DIBCOM_STK807XPVR 0x1f98 +#define USB_PID_DIBCOM_STK8096GP 0x1fa0 #define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 #define USB_PID_DIBCOM_STK7770P 0x1e80 #define USB_PID_DPOSH_M9206_COLD 0x9206 diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 58aac01..a3b8b697 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -526,6 +526,15 @@ config DVB_TUNER_DIB0070 This device is only used inside a SiP called together with a demodulator for now. +config DVB_TUNER_DIB0090 + tristate "DiBcom DiB0090 silicon base-band tuner" + depends on I2C + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon baseband tuner DiB0090 from DiBcom. + This device is only used inside a SiP called together with a + demodulator for now. + comment "SEC control devices for DVB-S" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 8234825..47575cc 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_DVB_TDA10086) += tda10086.o obj-$(CONFIG_DVB_TDA826X) += tda826x.o obj-$(CONFIG_DVB_TDA8261) += tda8261.o obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o +obj-$(CONFIG_DVB_TUNER_DIB0090) += dib0090.o obj-$(CONFIG_DVB_TUA6100) += tua6100.o obj-$(CONFIG_DVB_S5H1409) += s5h1409.o obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c index 2be17b9..81860b2 100644 --- a/drivers/media/dvb/frontends/dib0070.c +++ b/drivers/media/dvb/frontends/dib0070.c @@ -49,21 +49,6 @@ MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); #define DIB0070_P1G 0x03 #define DIB0070S_P1A 0x02 -enum frontend_tune_state { - CT_TUNER_START = 10, - CT_TUNER_STEP_0, - CT_TUNER_STEP_1, - CT_TUNER_STEP_2, - CT_TUNER_STEP_3, - CT_TUNER_STEP_4, - CT_TUNER_STEP_5, - CT_TUNER_STEP_6, - CT_TUNER_STEP_7, - CT_TUNER_STOP, -}; - -#define FE_CALLBACK_TIME_NEVER 0xffffffff - struct dib0070_state { struct i2c_adapter *i2c; struct dvb_frontend *fe; @@ -71,10 +56,10 @@ struct dib0070_state { u16 wbd_ff_offset; u8 revision; - enum frontend_tune_state tune_state; - u32 current_rf; + enum frontend_tune_state tune_state; + u32 current_rf; - /* for the captrim binary search */ + /* for the captrim binary search */ s8 step; u16 adc_diff; @@ -85,7 +70,7 @@ struct dib0070_state { const struct dib0070_tuning *current_tune_table_index; const struct dib0070_lna_match *lna_match; - u8 wbd_gain_current; + u8 wbd_gain_current; u16 wbd_offset_3_3[2]; }; @@ -93,8 +78,8 @@ static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg) { u8 b[2]; struct i2c_msg msg[2] = { - {.addr = state->cfg->i2c_address,.flags = 0,.buf = ®,.len = 1}, - {.addr = state->cfg->i2c_address,.flags = I2C_M_RD,.buf = b,.len = 2}, + { .addr = state->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b, .len = 2 }, }; if (i2c_transfer(state->i2c, msg, 2) != 2) { printk(KERN_WARNING "DiB0070 I2C read failed\n"); @@ -106,7 +91,7 @@ static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg) static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val) { u8 b[3] = { reg, val >> 8, val & 0xff }; - struct i2c_msg msg = {.addr = state->cfg->i2c_address,.flags = 0,.buf = b,.len = 3 }; + struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 }; if (i2c_transfer(state->i2c, &msg, 1) != 1) { printk(KERN_WARNING "DiB0070 I2C write failed\n"); return -EREMOTEIO; @@ -124,30 +109,30 @@ static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val) static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch) { - struct dib0070_state *state = fe->tuner_priv; - u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff; - - if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 7000) - tmp |= (0 << 14); - else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 6000) - tmp |= (1 << 14); - else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 5000) - tmp |= (2 << 14); - else - tmp |= (3 << 14); - - dib0070_write_reg(state, 0x02, tmp); - - /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */ - if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) { - u16 value = dib0070_read_reg(state, 0x17); - - dib0070_write_reg(state, 0x17, value & 0xfffc); - tmp = dib0070_read_reg(state, 0x01) & 0x01ff; - dib0070_write_reg(state, 0x01, tmp | (60 << 9)); - - dib0070_write_reg(state, 0x17, value); - } + struct dib0070_state *state = fe->tuner_priv; + u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff; + + if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 7000) + tmp |= (0 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 6000) + tmp |= (1 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 5000) + tmp |= (2 << 14); + else + tmp |= (3 << 14); + + dib0070_write_reg(state, 0x02, tmp); + + /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */ + if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) { + u16 value = dib0070_read_reg(state, 0x17); + + dib0070_write_reg(state, 0x17, value & 0xfffc); + tmp = dib0070_read_reg(state, 0x01) & 0x01ff; + dib0070_write_reg(state, 0x01, tmp | (60 << 9)); + + dib0070_write_reg(state, 0x17, value); + } return 0; } @@ -160,14 +145,14 @@ static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state if (*tune_state == CT_TUNER_STEP_0) { dib0070_write_reg(state, 0x0f, 0xed10); - dib0070_write_reg(state, 0x17, 0x0034); + dib0070_write_reg(state, 0x17, 0x0034); dib0070_write_reg(state, 0x18, 0x0032); state->step = state->captrim = state->fcaptrim = 64; state->adc_diff = 3000; ret = 20; - *tune_state = CT_TUNER_STEP_1; + *tune_state = CT_TUNER_STEP_1; } else if (*tune_state == CT_TUNER_STEP_1) { state->step /= 2; dib0070_write_reg(state, 0x14, state->lo4 | state->captrim); @@ -178,7 +163,7 @@ static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state adc = dib0070_read_reg(state, 0x19); - dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc * (u32) 1800 / (u32) 1024); + dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc*(u32)1800/(u32)1024); if (adc >= 400) { adc -= 400; @@ -189,10 +174,12 @@ static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state } if (adc < state->adc_diff) { - dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff); + dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff); state->adc_diff = adc; state->fcaptrim = state->captrim; + + } state->captrim += (step_sign * state->step); @@ -213,8 +200,8 @@ static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt) { struct dib0070_state *state = fe->tuner_priv; - u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0); - dprintk("CTRL_LO5: 0x%x", lo5); + u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0); + dprintk( "CTRL_LO5: 0x%x", lo5); return dib0070_write_reg(state, 0x15, lo5); } @@ -227,171 +214,175 @@ void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) dib0070_write_reg(state, 0x1a, 0x0000); } else { dib0070_write_reg(state, 0x1b, 0x4112); - if (state->cfg->vga_filter != 0) { - dib0070_write_reg(state, 0x1a, state->cfg->vga_filter); - dprintk("vga filter register is set to %x", state->cfg->vga_filter); - } else - dib0070_write_reg(state, 0x1a, 0x0009); + if (state->cfg->vga_filter != 0) { + dib0070_write_reg(state, 0x1a, state->cfg->vga_filter); + dprintk( "vga filter register is set to %x", state->cfg->vga_filter); + } else + dib0070_write_reg(state, 0x1a, 0x0009); } } EXPORT_SYMBOL(dib0070_ctrl_agc_filter); struct dib0070_tuning { - u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ - u8 switch_trim; - u8 vco_band; - u8 hfdiv; - u8 vco_multi; - u8 presc; - u8 wbdmux; - u16 tuner_enable; + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 switch_trim; + u8 vco_band; + u8 hfdiv; + u8 vco_multi; + u8 presc; + u8 wbdmux; + u16 tuner_enable; }; struct dib0070_lna_match { - u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ - u8 lna_band; + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 lna_band; }; static const struct dib0070_tuning dib0070s_tuning_table[] = { - {570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800}, /* UHF */ - {700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800}, - {863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800}, - {1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400}, /* LBAND */ - {1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400}, - {2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400}, - {0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000}, /* SBAND */ + { 570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800 }, /* UHF */ + { 700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800 }, + { 863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800 }, + { 1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND */ + { 1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, + { 2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, + { 0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000 }, /* SBAND */ }; static const struct dib0070_tuning dib0070_tuning_table[] = { - {115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000}, /* FM below 92MHz cannot be tuned */ - {179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000}, /* VHF */ - {189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000}, - {250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000}, - {569999, 2, 1, 5, 6, 2, 2, 0x4000 | 0x0800}, /* UHF */ - {699999, 2, 0, 1, 4, 2, 2, 0x4000 | 0x0800}, - {863999, 2, 1, 1, 4, 2, 2, 0x4000 | 0x0800}, - {0xffffffff, 0, 1, 0, 2, 2, 4, 0x2000 | 0x0400}, /* LBAND or everything higher than UHF */ + { 115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000 }, /* FM below 92MHz cannot be tuned */ + { 179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000 }, /* VHF */ + { 189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000 }, + { 250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000 }, + { 569999, 2, 1, 5, 6, 2, 2, 0x4000 | 0x0800 }, /* UHF */ + { 699999, 2, 0 ,1, 4, 2, 2, 0x4000 | 0x0800 }, + { 863999, 2, 1, 1, 4, 2, 2, 0x4000 | 0x0800 }, + { 0xffffffff, 0, 1, 0, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND or everything higher than UHF */ }; static const struct dib0070_lna_match dib0070_lna_flip_chip[] = { - {180000, 0}, /* VHF */ - {188000, 1}, - {196400, 2}, - {250000, 3}, - {550000, 0}, /* UHF */ - {590000, 1}, - {666000, 3}, - {864000, 5}, - {1500000, 0}, /* LBAND or everything higher than UHF */ - {1600000, 1}, - {2000000, 3}, - {0xffffffff, 7}, + { 180000, 0 }, /* VHF */ + { 188000, 1 }, + { 196400, 2 }, + { 250000, 3 }, + { 550000, 0 }, /* UHF */ + { 590000, 1 }, + { 666000, 3 }, + { 864000, 5 }, + { 1500000, 0 }, /* LBAND or everything higher than UHF */ + { 1600000, 1 }, + { 2000000, 3 }, + { 0xffffffff, 7 }, }; static const struct dib0070_lna_match dib0070_lna[] = { - {180000, 0}, /* VHF */ - {188000, 1}, - {196400, 2}, - {250000, 3}, - {550000, 2}, /* UHF */ - {650000, 3}, - {750000, 5}, - {850000, 6}, - {864000, 7}, - {1500000, 0}, /* LBAND or everything higher than UHF */ - {1600000, 1}, - {2000000, 3}, - {0xffffffff, 7}, + { 180000, 0 }, /* VHF */ + { 188000, 1 }, + { 196400, 2 }, + { 250000, 3 }, + { 550000, 2 }, /* UHF */ + { 650000, 3 }, + { 750000, 5 }, + { 850000, 6 }, + { 864000, 7 }, + { 1500000, 0 }, /* LBAND or everything higher than UHF */ + { 1600000, 1 }, + { 2000000, 3 }, + { 0xffffffff, 7 }, }; -#define LPF 100 // define for the loop filter 100kHz by default 16-07-06 +#define LPF 100 // define for the loop filter 100kHz by default 16-07-06 static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch) { - struct dib0070_state *state = fe->tuner_priv; + struct dib0070_state *state = fe->tuner_priv; - const struct dib0070_tuning *tune; - const struct dib0070_lna_match *lna_match; + const struct dib0070_tuning *tune; + const struct dib0070_lna_match *lna_match; - enum frontend_tune_state *tune_state = &state->tune_state; - int ret = 10; /* 1ms is the default delay most of the time */ + enum frontend_tune_state *tune_state = &state->tune_state; + int ret = 10; /* 1ms is the default delay most of the time */ - u8 band = (u8) BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000); - u32 freq = fe->dtv_property_cache.frequency / 1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf); + u8 band = (u8)BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency/1000); + u32 freq = fe->dtv_property_cache.frequency/1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf); #ifdef CONFIG_SYS_ISDBT - if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1) + if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1) if (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == (state->fe->dtv_property_cache.isdbt_sb_segment_count / 2))) || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))) - freq += 850; + freq += 850; #endif + if (state->current_rf != freq) { + + switch (state->revision) { + case DIB0070S_P1A: + tune = dib0070s_tuning_table; + lna_match = dib0070_lna; + break; + default: + tune = dib0070_tuning_table; + if (state->cfg->flip_chip) + lna_match = dib0070_lna_flip_chip; + else + lna_match = dib0070_lna; + break; + } + while (freq > tune->max_freq) /* find the right one */ + tune++; + while (freq > lna_match->max_freq) /* find the right one */ + lna_match++; + + state->current_tune_table_index = tune; + state->lna_match = lna_match; + } + + if (*tune_state == CT_TUNER_START) { + dprintk( "Tuning for Band: %hd (%d kHz)", band, freq); if (state->current_rf != freq) { + u8 REFDIV; + u32 FBDiv, Rest, FREF, VCOF_kHz; + u8 Den; - switch (state->revision) { - case DIB0070S_P1A: - tune = dib0070s_tuning_table; - lna_match = dib0070_lna; - break; - default: - tune = dib0070_tuning_table; - if (state->cfg->flip_chip) - lna_match = dib0070_lna_flip_chip; - else - lna_match = dib0070_lna; - break; - } - while (freq > tune->max_freq) /* find the right one */ - tune++; - while (freq > lna_match->max_freq) /* find the right one */ - lna_match++; + state->current_rf = freq; + state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7); - state->current_tune_table_index = tune; - state->lna_match = lna_match; - } - if (*tune_state == CT_TUNER_START) { - dprintk("Tuning for Band: %hd (%d kHz)", band, freq); - if (state->current_rf != freq) { - u8 REFDIV; - u32 FBDiv, Rest, FREF, VCOF_kHz; - u8 Den; - - state->current_rf = freq; - state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7); - - dib0070_write_reg(state, 0x17, 0x30); - - VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2; - - switch (band) { - case BAND_VHF: - REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000); - break; - case BAND_FM: - REFDIV = (u8) ((state->cfg->clock_khz) / 1000); - break; - default: - REFDIV = (u8) (state->cfg->clock_khz / 10000); - break; - } - FREF = state->cfg->clock_khz / REFDIV; - - switch (state->revision) { - case DIB0070S_P1A: - FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF); - Rest = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF; - break; - - case DIB0070_P1G: - case DIB0070_P1F: - default: - FBDiv = (freq / (FREF / 2)); - Rest = 2 * freq - FBDiv * FREF; - break; - } + dib0070_write_reg(state, 0x17, 0x30); + + + VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2; + + switch (band) { + case BAND_VHF: + REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000); + break; + case BAND_FM: + REFDIV = (u8) ((state->cfg->clock_khz) / 1000); + break; + default: + REFDIV = (u8) ( state->cfg->clock_khz / 10000); + break; + } + FREF = state->cfg->clock_khz / REFDIV; + + + + switch (state->revision) { + case DIB0070S_P1A: + FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF); + Rest = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF; + break; + + case DIB0070_P1G: + case DIB0070_P1F: + default: + FBDiv = (freq / (FREF / 2)); + Rest = 2 * freq - FBDiv * FREF; + break; + } if (Rest < LPF) Rest = 0; @@ -402,98 +393,102 @@ static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_par FBDiv += 1; } else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF; - Rest = (Rest * 6528) / (FREF / 10); + Rest = (Rest * 6528) / (FREF / 10); - Den = 1; - if (Rest > 0) { - state->lo4 |= (1 << 14) | (1 << 12); - Den = 255; - } + Den = 1; + if (Rest > 0) { + state->lo4 |= (1 << 14) | (1 << 12); + Den = 255; + } - dib0070_write_reg(state, 0x11, (u16) FBDiv); - dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV); - dib0070_write_reg(state, 0x13, (u16) Rest); - if (state->revision == DIB0070S_P1A) { + dib0070_write_reg(state, 0x11, (u16)FBDiv); + dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV); + dib0070_write_reg(state, 0x13, (u16) Rest); - if (band == BAND_SBAND) { - dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); - dib0070_write_reg(state, 0x1d, 0xFFFF); - } else - dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1); - } + if (state->revision == DIB0070S_P1A) { + + if (band == BAND_SBAND) { + dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); + dib0070_write_reg(state, 0x1d,0xFFFF); + } else + dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1); + } dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | state->current_tune_table_index->tuner_enable); - dprintk("REFDIV: %hd, FREF: %d", REFDIV, FREF); - dprintk("FBDIV: %d, Rest: %d", FBDiv, Rest); - dprintk("Num: %hd, Den: %hd, SD: %hd", (u16) Rest, Den, (state->lo4 >> 12) & 0x1); - dprintk("HFDIV code: %hd", state->current_tune_table_index->hfdiv); - dprintk("VCO = %hd", state->current_tune_table_index->vco_band); - dprintk("VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq); - - *tune_state = CT_TUNER_STEP_0; - } else { /* we are already tuned to this frequency - the configuration is correct */ - ret = 50; /* wakeup time */ - *tune_state = CT_TUNER_STEP_5; - } - } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) { + dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF); + dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest); + dprintk( "Num: %hd, Den: %hd, SD: %hd",(u16) Rest, Den, (state->lo4 >> 12) & 0x1); + dprintk( "HFDIV code: %hd", state->current_tune_table_index->hfdiv); + dprintk( "VCO = %hd", state->current_tune_table_index->vco_band); + dprintk( "VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq); + + *tune_state = CT_TUNER_STEP_0; + } else { /* we are already tuned to this frequency - the configuration is correct */ + ret = 50; /* wakeup time */ + *tune_state = CT_TUNER_STEP_5; + } + } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) { - ret = dib0070_captrim(state, tune_state); + ret = dib0070_captrim(state, tune_state); - } else if (*tune_state == CT_TUNER_STEP_4) { - const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; - if (tmp != NULL) { - while (freq / 1000 > tmp->freq) /* find the right one */ - tmp++; + } else if (*tune_state == CT_TUNER_STEP_4) { + const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; + if (tmp != NULL) { + while (freq/1000 > tmp->freq) /* find the right one */ + tmp++; dib0070_write_reg(state, 0x0f, (0 << 15) | (1 << 14) | (3 << 12) | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) | (state-> current_tune_table_index-> wbdmux << 0)); - state->wbd_gain_current = tmp->wbd_gain_val; - } else { + state->wbd_gain_current = tmp->wbd_gain_val; + } else { dib0070_write_reg(state, 0x0f, (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (state->current_tune_table_index-> wbdmux << 0)); - state->wbd_gain_current = 6; - } + state->wbd_gain_current = 6; + } - dib0070_write_reg(state, 0x06, 0x3fff); + dib0070_write_reg(state, 0x06, 0x3fff); dib0070_write_reg(state, 0x07, (state->current_tune_table_index->switch_trim << 11) | (7 << 8) | (state->lna_match->lna_band << 3) | (3 << 0)); - dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127)); - dib0070_write_reg(state, 0x0d, 0x0d80); + dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127)); + dib0070_write_reg(state, 0x0d, 0x0d80); - dib0070_write_reg(state, 0x18, 0x07ff); - dib0070_write_reg(state, 0x17, 0x0033); - *tune_state = CT_TUNER_STEP_5; - } else if (*tune_state == CT_TUNER_STEP_5) { - dib0070_set_bandwidth(fe, ch); - *tune_state = CT_TUNER_STOP; - } else { - ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */ - } - return ret; + dib0070_write_reg(state, 0x18, 0x07ff); + dib0070_write_reg(state, 0x17, 0x0033); + + + *tune_state = CT_TUNER_STEP_5; + } else if (*tune_state == CT_TUNER_STEP_5) { + dib0070_set_bandwidth(fe, ch); + *tune_state = CT_TUNER_STOP; + } else { + ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */ + } + return ret; } + static int dib0070_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct dib0070_state *state = fe->tuner_priv; - uint32_t ret; + struct dib0070_state *state = fe->tuner_priv; + uint32_t ret; - state->tune_state = CT_TUNER_START; + state->tune_state = CT_TUNER_START; - do { - ret = dib0070_tune_digital(fe, p); - if (ret != FE_CALLBACK_TIME_NEVER) - msleep(ret / 10); - else - break; - } while (state->tune_state != CT_TUNER_STOP); + do { + ret = dib0070_tune_digital(fe, p); + if (ret != FE_CALLBACK_TIME_NEVER) + msleep(ret/10); + else + break; + } while (state->tune_state != CT_TUNER_STOP); - return 0; + return 0; } static int dib0070_wakeup(struct dvb_frontend *fe) @@ -512,92 +507,111 @@ static int dib0070_sleep(struct dvb_frontend *fe) return 0; } -static const u16 dib0070_p1f_defaults[] = { +u8 dib0070_get_rf_output(struct dvb_frontend *fe) +{ + struct dib0070_state *state = fe->tuner_priv; + return (dib0070_read_reg(state, 0x07) >> 11) & 0x3; +} + +EXPORT_SYMBOL(dib0070_get_rf_output); +int dib0070_set_rf_output(struct dvb_frontend *fe, u8 no) +{ + struct dib0070_state *state = fe->tuner_priv; + u16 rxrf2 = dib0070_read_reg(state, 0x07) & 0xfe7ff; + if (no > 3) no = 3; + if (no < 1) no = 1; + return dib0070_write_reg(state, 0x07, rxrf2 | (no << 11)); +} + +EXPORT_SYMBOL(dib0070_set_rf_output); +static const u16 dib0070_p1f_defaults[] = + +{ 7, 0x02, - 0x0008, - 0x0000, - 0x0000, - 0x0000, - 0x0000, - 0x0002, - 0x0100, + 0x0008, + 0x0000, + 0x0000, + 0x0000, + 0x0000, + 0x0002, + 0x0100, 3, 0x0d, - 0x0d80, - 0x0001, - 0x0000, + 0x0d80, + 0x0001, + 0x0000, 4, 0x11, - 0x0000, - 0x0103, - 0x0000, - 0x0000, + 0x0000, + 0x0103, + 0x0000, + 0x0000, 3, 0x16, - 0x0004 | 0x0040, - 0x0030, - 0x07ff, + 0x0004 | 0x0040, + 0x0030, + 0x07ff, 6, 0x1b, - 0x4112, - 0xff00, - 0xc07f, - 0x0000, - 0x0180, - 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001, + 0x4112, + 0xff00, + 0xc07f, + 0x0000, + 0x0180, + 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001, 0, }; static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain) { - u16 tuner_en = dib0070_read_reg(state, 0x20); - u16 offset; - - dib0070_write_reg(state, 0x18, 0x07ff); - dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001); - dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0)); - msleep(9); - offset = dib0070_read_reg(state, 0x19); - dib0070_write_reg(state, 0x20, tuner_en); - return offset; + u16 tuner_en = dib0070_read_reg(state, 0x20); + u16 offset; + + dib0070_write_reg(state, 0x18, 0x07ff); + dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001); + dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0)); + msleep(9); + offset = dib0070_read_reg(state, 0x19); + dib0070_write_reg(state, 0x20, tuner_en); + return offset; } static void dib0070_wbd_offset_calibration(struct dib0070_state *state) { - u8 gain; - for (gain = 6; gain < 8; gain++) { - state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2); - dprintk("Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain - 6]); - } + u8 gain; + for (gain = 6; gain < 8; gain++) { + state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2); + dprintk( "Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain-6]); + } } u16 dib0070_wbd_offset(struct dvb_frontend *fe) { - struct dib0070_state *state = fe->tuner_priv; - const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; - u32 freq = fe->dtv_property_cache.frequency / 1000; - - if (tmp != NULL) { - while (freq / 1000 > tmp->freq) /* find the right one */ - tmp++; - state->wbd_gain_current = tmp->wbd_gain_val; + struct dib0070_state *state = fe->tuner_priv; + const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; + u32 freq = fe->dtv_property_cache.frequency/1000; + + if (tmp != NULL) { + while (freq/1000 > tmp->freq) /* find the right one */ + tmp++; + state->wbd_gain_current = tmp->wbd_gain_val; } else - state->wbd_gain_current = 6; + state->wbd_gain_current = 6; - return state->wbd_offset_3_3[state->wbd_gain_current - 6]; + return state->wbd_offset_3_3[state->wbd_gain_current - 6]; } - EXPORT_SYMBOL(dib0070_wbd_offset); #define pgm_read_word(w) (*w) static int dib0070_reset(struct dvb_frontend *fe) { - struct dib0070_state *state = fe->tuner_priv; + struct dib0070_state *state = fe->tuner_priv; u16 l, r, *n; HARD_RESET(state); + #ifndef FORCE_SBAND_TUNER if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1) state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff; @@ -605,13 +619,13 @@ static int dib0070_reset(struct dvb_frontend *fe) #else #warning forcing SBAND #endif - state->revision = DIB0070S_P1A; + state->revision = DIB0070S_P1A; /* P1F or not */ - dprintk("Revision: %x", state->revision); + dprintk( "Revision: %x", state->revision); if (state->revision == DIB0070_P1D) { - dprintk("Error: this driver is not to be used meant for P1D or earlier"); + dprintk( "Error: this driver is not to be used meant for P1D or earlier"); return -EINVAL; } @@ -620,7 +634,7 @@ static int dib0070_reset(struct dvb_frontend *fe) while (l) { r = pgm_read_word(n++); do { - dib0070_write_reg(state, (u8) r, pgm_read_word(n++)); + dib0070_write_reg(state, (u8)r, pgm_read_word(n++)); r++; } while (--l); l = pgm_read_word(n++); @@ -633,6 +647,7 @@ static int dib0070_reset(struct dvb_frontend *fe) else r = 2; + r |= state->cfg->osc_buffer_state << 3; dib0070_write_reg(state, 0x10, r); @@ -643,16 +658,24 @@ static int dib0070_reset(struct dvb_frontend *fe) dib0070_write_reg(state, 0x02, r | (1 << 5)); } - if (state->revision == DIB0070S_P1A) - dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); - else + if (state->revision == DIB0070S_P1A) + dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); + else dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter); dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8); - dib0070_wbd_offset_calibration(state); + dib0070_wbd_offset_calibration(state); - return 0; + return 0; +} + +static int dib0070_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct dib0070_state *state = fe->tuner_priv; + + *frequency = 1000 * state->current_rf; + return 0; } static int dib0070_release(struct dvb_frontend *fe) @@ -664,22 +687,22 @@ static int dib0070_release(struct dvb_frontend *fe) static const struct dvb_tuner_ops dib0070_ops = { .info = { - .name = "DiBcom DiB0070", - .frequency_min = 45000000, - .frequency_max = 860000000, - .frequency_step = 1000, - }, - .release = dib0070_release, - - .init = dib0070_wakeup, - .sleep = dib0070_sleep, - .set_params = dib0070_tune, - -// .get_frequency = dib0070_get_frequency, + .name = "DiBcom DiB0070", + .frequency_min = 45000000, + .frequency_max = 860000000, + .frequency_step = 1000, + }, + .release = dib0070_release, + + .init = dib0070_wakeup, + .sleep = dib0070_sleep, + .set_params = dib0070_tune, + + .get_frequency = dib0070_get_frequency, // .get_bandwidth = dib0070_get_bandwidth }; -struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) +struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL); if (state == NULL) @@ -687,7 +710,7 @@ struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter state->cfg = cfg; state->i2c = i2c; - state->fe = fe; + state->fe = fe; fe->tuner_priv = state; if (dib0070_reset(fe) != 0) @@ -699,12 +722,11 @@ struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter fe->tuner_priv = state; return fe; - free_mem: +free_mem: kfree(state); fe->tuner_priv = NULL; return NULL; } - EXPORT_SYMBOL(dib0070_attach); MODULE_AUTHOR("Patrick Boettcher "); diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index eec9e52..45c31fa 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -52,6 +52,8 @@ struct dib0070_config { extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); extern u16 dib0070_wbd_offset(struct dvb_frontend *); extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); +extern u8 dib0070_get_rf_output(struct dvb_frontend *fe); +extern int dib0070_set_rf_output(struct dvb_frontend *fe, u8 no); #else static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { @@ -62,7 +64,7 @@ static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struc static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return -ENODEV; + return 0; } static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) diff --git a/drivers/media/dvb/frontends/dib0090.c b/drivers/media/dvb/frontends/dib0090.c new file mode 100644 index 0000000..e37d32d --- /dev/null +++ b/drivers/media/dvb/frontends/dib0090.c @@ -0,0 +1,1525 @@ +/* + * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner. + * + * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * This code is more or less generated from another driver, please + * excuse some codingstyle oddities. + * + */ + +#include +#include + +#include "dvb_frontend.h" + +#include "dib0090.h" +#include "dibx000_common.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { \ + if (debug) { \ + printk(KERN_DEBUG "DiB0090: "); \ + printk(args); \ + printk("\n"); \ + } \ +} while (0) + +#define CONFIG_SYS_ISDBT +#define CONFIG_BAND_CBAND +#define CONFIG_BAND_VHF +#define CONFIG_BAND_UHF +#define CONFIG_DIB0090_USE_PWM_AGC + +#define EN_LNA0 0x8000 +#define EN_LNA1 0x4000 +#define EN_LNA2 0x2000 +#define EN_LNA3 0x1000 +#define EN_MIX0 0x0800 +#define EN_MIX1 0x0400 +#define EN_MIX2 0x0200 +#define EN_MIX3 0x0100 +#define EN_IQADC 0x0040 +#define EN_PLL 0x0020 +#define EN_TX 0x0010 +#define EN_BB 0x0008 +#define EN_LO 0x0004 +#define EN_BIAS 0x0001 + +#define EN_IQANA 0x0002 +#define EN_DIGCLK 0x0080 /* not in the 0x24 reg, only in 0x1b */ +#define EN_CRYSTAL 0x0002 + +#define EN_UHF 0x22E9 +#define EN_VHF 0x44E9 +#define EN_LBD 0x11E9 +#define EN_SBD 0x44E9 +#define EN_CAB 0x88E9 + +#define pgm_read_word(w) (*w) + +struct dc_calibration; + +struct dib0090_tuning { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 switch_trim; + u8 lna_tune; + u8 lna_bias; + u16 v2i; + u16 mix; + u16 load; + u16 tuner_enable; +}; + +struct dib0090_pll { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 vco_band; + u8 hfdiv_code; + u8 hfdiv; + u8 topresc; +}; + +struct dib0090_state { + struct i2c_adapter *i2c; + struct dvb_frontend *fe; + const struct dib0090_config *config; + + u8 current_band; + u16 revision; + enum frontend_tune_state tune_state; + u32 current_rf; + + u16 wbd_offset; + s16 wbd_target; /* in dB */ + + s16 rf_gain_limit; /* take-over-point: where to split between bb and rf gain */ + s16 current_gain; /* keeps the currently programmed gain */ + u8 agc_step; /* new binary search */ + + u16 gain[2]; /* for channel monitoring */ + + const u16 *rf_ramp; + const u16 *bb_ramp; + + /* for the software AGC ramps */ + u16 bb_1_def; + u16 rf_lt_def; + u16 gain_reg[4]; + + /* for the captrim/dc-offset search */ + s8 step; + s16 adc_diff; + s16 min_adc_diff; + + s8 captrim; + s8 fcaptrim; + + const struct dc_calibration *dc; + u16 bb6, bb7; + + const struct dib0090_tuning *current_tune_table_index; + const struct dib0090_pll *current_pll_table_index; + + u8 tuner_is_tuned; + u8 agc_freeze; + + u8 reset; +}; + +static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg) +{ + u8 b[2]; + struct i2c_msg msg[2] = { + {.addr = state->config->i2c_address,.flags = 0,.buf = ®,.len = 1}, + {.addr = state->config->i2c_address,.flags = I2C_M_RD,.buf = b,.len = 2}, + }; + if (i2c_transfer(state->i2c, msg, 2) != 2) { + printk(KERN_WARNING "DiB0090 I2C read failed\n"); + return 0; + } + return (b[0] << 8) | b[1]; +} + +static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val) +{ + u8 b[3] = { reg & 0xff, val >> 8, val & 0xff }; + struct i2c_msg msg = {.addr = state->config->i2c_address,.flags = 0,.buf = b,.len = 3 }; + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + printk(KERN_WARNING "DiB0090 I2C write failed\n"); + return -EREMOTEIO; + } + return 0; +} + +#define HARD_RESET(state) do { if (cfg->reset) { if (cfg->sleep) cfg->sleep(fe, 0); msleep(10); cfg->reset(fe, 1); msleep(10); cfg->reset(fe, 0); msleep(10); } } while (0) +#define ADC_TARGET -220 +#define GAIN_ALPHA 5 +#define WBD_ALPHA 6 +#define LPF 100 +static void dib0090_write_regs(struct dib0090_state *state, u8 r, const u16 * b, u8 c) +{ + do { + dib0090_write_reg(state, r++, *b++); + } while (--c); +} + +static u16 dib0090_identify(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + u16 v; + + v = dib0090_read_reg(state, 0x1a); + +#ifdef FIRMWARE_FIREFLY + /* pll is not locked locked */ + if (!(v & 0x800)) + dprintk("FE%d : Identification : pll is not yet locked", fe->id); +#endif + + /* without PLL lock info */ + v &= 0x3ff; + dprintk("P/V: %04x:", v); + + if ((v >> 8) & 0xf) + dprintk("FE%d : Product ID = 0x%x : KROSUS", fe->id, (v >> 8) & 0xf); + else + return 0xff; + + v &= 0xff; + if (((v >> 5) & 0x7) == 0x1) + dprintk("FE%d : MP001 : 9090/8096", fe->id); + else if (((v >> 5) & 0x7) == 0x4) + dprintk("FE%d : MP005 : Single Sband", fe->id); + else if (((v >> 5) & 0x7) == 0x6) + dprintk("FE%d : MP008 : diversity VHF-UHF-LBAND", fe->id); + else if (((v >> 5) & 0x7) == 0x7) + dprintk("FE%d : MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND", fe->id); + else + return 0xff; + + /* revision only */ + if ((v & 0x1f) == 0x3) + dprintk("FE%d : P1-D/E/F detected", fe->id); + else if ((v & 0x1f) == 0x1) + dprintk("FE%d : P1C detected", fe->id); + else if ((v & 0x1f) == 0x0) { +#ifdef CONFIG_TUNER_DIB0090_P1B_SUPPORT + dprintk("FE%d : P1-A/B detected: using previous driver - support will be removed soon", fe->id); + dib0090_p1b_register(fe); +#else + dprintk("FE%d : P1-A/B detected: driver is deactivated - not available", fe->id); + return 0xff; +#endif + } + + return v; +} + +static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg) +{ + struct dib0090_state *state = fe->tuner_priv; + + HARD_RESET(state); + + dib0090_write_reg(state, 0x24, EN_PLL); + dib0090_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL); /* PLL, DIG_CLK and CRYSTAL remain */ + + /* adcClkOutRatio=8->7, release reset */ + dib0090_write_reg(state, 0x20, ((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (0 << 4) | 0); + if (cfg->clkoutdrive != 0) + dib0090_write_reg(state, 0x23, + (0 << 15) | ((!cfg->analog_output) << 14) | (1 << 10) | (1 << 9) | (0 << 8) | (cfg->clkoutdrive << 5) | (cfg-> + clkouttobamse + << 4) | (0 + << + 2) + | (0)); + else + dib0090_write_reg(state, 0x23, + (0 << 15) | ((!cfg->analog_output) << 14) | (1 << 10) | (1 << 9) | (0 << 8) | (7 << 5) | (cfg-> + clkouttobamse << 4) | (0 + << + 2) + | (0)); + + /* enable pll, de-activate reset, ratio: 2/1 = 60MHz */ + dib0090_write_reg(state, 0x21, + (cfg->io.pll_bypass << 15) | (1 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)); + +} + +static int dib0090_wakeup(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + if (state->config->sleep) + state->config->sleep(fe, 0); + return 0; +} + +static int dib0090_sleep(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + if (state->config->sleep) + state->config->sleep(fe, 1); + return 0; +} + +extern void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast) +{ + struct dib0090_state *state = fe->tuner_priv; + if (fast) + dib0090_write_reg(state, 0x04, 0); //1kHz + else + dib0090_write_reg(state, 0x04, 1); //almost frozen +} + +EXPORT_SYMBOL(dib0090_dcc_freq); +static const u16 rf_ramp_pwm_cband[] = { + 0, /* max RF gain in 10th of dB */ + 0, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x2b */ + 0, /* ramp_max = maximum X used on the ramp */ + (0 << 10) | 0, /* 0x2c, LNA 1 = 0dB */ + (0 << 10) | 0, /* 0x2d, LNA 1 */ + (0 << 10) | 0, /* 0x2e, LNA 2 = 0dB */ + (0 << 10) | 0, /* 0x2f, LNA 2 */ + (0 << 10) | 0, /* 0x30, LNA 3 = 0dB */ + (0 << 10) | 0, /* 0x31, LNA 3 */ + (0 << 10) | 0, /* GAIN_4_1, LNA 4 = 0dB */ + (0 << 10) | 0, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 rf_ramp_vhf[] = { + 412, /* max RF gain in 10th of dB */ + 132, 307, 127, /* LNA1, 13.2dB */ + 105, 412, 255, /* LNA2, 10.5dB */ + 50, 50, 127, /* LNA3, 5dB */ + 125, 175, 127, /* LNA4, 12.5dB */ + 0, 0, 127, /* CBAND, 0dB */ +}; + +static const u16 rf_ramp_uhf[] = { + 412, /* max RF gain in 10th of dB */ + 132, 307, 127, /* LNA1 : total gain = 13.2dB, point on the ramp where this amp is full gain, value to write to get full gain */ + 105, 412, 255, /* LNA2 : 10.5 dB */ + 50, 50, 127, /* LNA3 : 5.0 dB */ + 125, 175, 127, /* LNA4 : 12.5 dB */ + 0, 0, 127, /* CBAND : 0.0 dB */ +}; + +static const u16 rf_ramp_cband[] = { + 332, /* max RF gain in 10th of dB */ + 132, 252, 127, /* LNA1, dB */ + 80, 332, 255, /* LNA2, dB */ + 0, 0, 127, /* LNA3, dB */ + 0, 0, 127, /* LNA4, dB */ + 120, 120, 127, /* LT1 CBAND */ +}; + +static const u16 rf_ramp_pwm_vhf[] = { + 404, /* max RF gain in 10th of dB */ + 25, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x2b */ + 1011, /* ramp_max = maximum X used on the ramp */ + (6 << 10) | 417, /* 0x2c, LNA 1 = 13.2dB */ + (0 << 10) | 756, /* 0x2d, LNA 1 */ + (16 << 10) | 756, /* 0x2e, LNA 2 = 10.5dB */ + (0 << 10) | 1011, /* 0x2f, LNA 2 */ + (16 << 10) | 290, /* 0x30, LNA 3 = 5dB */ + (0 << 10) | 417, /* 0x31, LNA 3 */ + (7 << 10) | 0, /* GAIN_4_1, LNA 4 = 12.5dB */ + (0 << 10) | 290, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 rf_ramp_pwm_uhf[] = { + 404, /* max RF gain in 10th of dB */ + 25, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x2b */ + 1011, /* ramp_max = maximum X used on the ramp */ + (6 << 10) | 417, /* 0x2c, LNA 1 = 13.2dB */ + (0 << 10) | 756, /* 0x2d, LNA 1 */ + (16 << 10) | 756, /* 0x2e, LNA 2 = 10.5dB */ + (0 << 10) | 1011, /* 0x2f, LNA 2 */ + (16 << 10) | 0, /* 0x30, LNA 3 = 5dB */ + (0 << 10) | 127, /* 0x31, LNA 3 */ + (7 << 10) | 127, /* GAIN_4_1, LNA 4 = 12.5dB */ + (0 << 10) | 417, /* GAIN_4_2, LNA 4 */ +}; + +static const u16 bb_ramp_boost[] = { + 550, /* max BB gain in 10th of dB */ + 260, 260, 26, /* BB1, 26dB */ + 290, 550, 29, /* BB2, 29dB */ +}; + +static const u16 bb_ramp_pwm_normal[] = { + 500, /* max RF gain in 10th of dB */ + 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> 0x34 */ + 400, + (2 << 9) | 0, /* 0x35 = 21dB */ + (0 << 9) | 168, /* 0x36 */ + (2 << 9) | 168, /* 0x37 = 29dB */ + (0 << 9) | 400, /* 0x38 */ +}; + +struct slope { + int16_t range; + int16_t slope; +}; +static u16 slopes_to_scale(const struct slope *slopes, u8 num, s16 val) +{ + u8 i; + u16 rest; + u16 ret = 0; + for (i = 0; i < num; i++) { + if (val > slopes[i].range) + rest = slopes[i].range; + else + rest = val; + ret += (rest * slopes[i].slope) / slopes[i].range; + val -= rest; + } + return ret; +} + +static const struct slope dib0090_wbd_slopes[3] = { + {66, 120}, /* -64,-52: offset - 65 */ + {600, 170}, /* -52,-35: 65 - 665 */ + {170, 250}, /* -45,-10: 665 - 835 */ +}; + +static s16 dib0090_wbd_to_db(struct dib0090_state *state, u16 wbd) +{ + wbd &= 0x3ff; + if (wbd < state->wbd_offset) + wbd = 0; + else + wbd -= state->wbd_offset; + /* -64dB is the floor */ + return -640 + (s16) slopes_to_scale(dib0090_wbd_slopes, ARRAY_SIZE(dib0090_wbd_slopes), wbd); +} + +static void dib0090_wbd_target(struct dib0090_state *state, u32 rf) +{ + u16 offset = 250; + + /* TODO : DAB digital N+/-1 interferer perfs : offset = 10 */ + + if (state->current_band == BAND_VHF) + offset = 650; +#ifndef FIRMWARE_FIREFLY + if (state->current_band == BAND_VHF) + offset = state->config->wbd_vhf_offset; + if (state->current_band == BAND_CBAND) + offset = state->config->wbd_cband_offset; +#endif + + state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + offset); + dprintk("wbd-target: %d dB", (u32) state->wbd_target); +} + +static const int gain_reg_addr[4] = { + 0x08, 0x0a, 0x0f, 0x01 +}; + +static void dib0090_gain_apply(struct dib0090_state *state, s16 gain_delta, s16 top_delta, u8 force) +{ + u16 rf, bb, ref; + u16 i, v, gain_reg[4] = { 0 }, gain; + const u16 *g; + + if (top_delta < -511) + top_delta = -511; + if (top_delta > 511) + top_delta = 511; + + if (force) { + top_delta *= (1 << WBD_ALPHA); + gain_delta *= (1 << GAIN_ALPHA); + } + + if (top_delta >= ((s16) (state->rf_ramp[0] << WBD_ALPHA) - state->rf_gain_limit)) /* overflow */ + state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA; + else + state->rf_gain_limit += top_delta; + + if (state->rf_gain_limit < 0) /*underflow */ + state->rf_gain_limit = 0; + + /* use gain as a temporary variable and correct current_gain */ + gain = ((state->rf_gain_limit >> WBD_ALPHA) + state->bb_ramp[0]) << GAIN_ALPHA; + if (gain_delta >= ((s16) gain - state->current_gain)) /* overflow */ + state->current_gain = gain; + else + state->current_gain += gain_delta; + /* cannot be less than 0 (only if gain_delta is less than 0 we can have current_gain < 0) */ + if (state->current_gain < 0) + state->current_gain = 0; + + /* now split total gain to rf and bb gain */ + gain = state->current_gain >> GAIN_ALPHA; + + /* requested gain is bigger than rf gain limit - ACI/WBD adjustment */ + if (gain > (state->rf_gain_limit >> WBD_ALPHA)) { + rf = state->rf_gain_limit >> WBD_ALPHA; + bb = gain - rf; + if (bb > state->bb_ramp[0]) + bb = state->bb_ramp[0]; + } else { /* high signal level -> all gains put on RF */ + rf = gain; + bb = 0; + } + + state->gain[0] = rf; + state->gain[1] = bb; + + /* software ramp */ + /* Start with RF gains */ + g = state->rf_ramp + 1; /* point on RF LNA1 max gain */ + ref = rf; + for (i = 0; i < 7; i++) { /* Go over all amplifiers => 5RF amps + 2 BB amps = 7 amps */ + if (g[0] == 0 || ref < (g[1] - g[0])) /* if total gain of the current amp is null or this amp is not concerned because it starts to work from an higher gain value */ + v = 0; /* force the gain to write for the current amp to be null */ + else if (ref >= g[1]) /* Gain to set is higher than the high working point of this amp */ + v = g[2]; /* force this amp to be full gain */ + else /* compute the value to set to this amp because we are somewhere in his range */ + v = ((ref - (g[1] - g[0])) * g[2]) / g[0]; + + if (i == 0) /* LNA 1 reg mapping */ + gain_reg[0] = v; + else if (i == 1) /* LNA 2 reg mapping */ + gain_reg[0] |= v << 7; + else if (i == 2) /* LNA 3 reg mapping */ + gain_reg[1] = v; + else if (i == 3) /* LNA 4 reg mapping */ + gain_reg[1] |= v << 7; + else if (i == 4) /* CBAND LNA reg mapping */ + gain_reg[2] = v | state->rf_lt_def; + else if (i == 5) /* BB gain 1 reg mapping */ + gain_reg[3] = v << 3; + else if (i == 6) /* BB gain 2 reg mapping */ + gain_reg[3] |= v << 8; + + g += 3; /* go to next gain bloc */ + + /* When RF is finished, start with BB */ + if (i == 4) { + g = state->bb_ramp + 1; /* point on BB gain 1 max gain */ + ref = bb; + } + } + gain_reg[3] |= state->bb_1_def; + gain_reg[3] |= ((bb % 10) * 100) / 125; + +#ifdef DEBUG_AGC + dprintk("GA CALC: DB: %3d(rf) + %3d(bb) = %3d gain_reg[0]=%04x gain_reg[1]=%04x gain_reg[2]=%04x gain_reg[0]=%04x", rf, bb, rf + bb, + gain_reg[0], gain_reg[1], gain_reg[2], gain_reg[3]); +#endif + + /* Write the amplifier regs */ + for (i = 0; i < 4; i++) { + v = gain_reg[i]; + if (force || state->gain_reg[i] != v) { + state->gain_reg[i] = v; + dib0090_write_reg(state, gain_reg_addr[i], v); + } + } +} + +static void dib0090_set_boost(struct dib0090_state *state, int onoff) +{ + state->bb_1_def &= 0xdfff; + state->bb_1_def |= onoff << 13; +} + +static void dib0090_set_rframp(struct dib0090_state *state, const u16 * cfg) +{ + state->rf_ramp = cfg; +} + +static void dib0090_set_rframp_pwm(struct dib0090_state *state, const u16 * cfg) +{ + state->rf_ramp = cfg; + + dib0090_write_reg(state, 0x2a, 0xffff); + + dprintk("total RF gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x2a)); + + dib0090_write_regs(state, 0x2c, cfg + 3, 6); + dib0090_write_regs(state, 0x3e, cfg + 9, 2); +} + +static void dib0090_set_bbramp(struct dib0090_state *state, const u16 * cfg) +{ + state->bb_ramp = cfg; + dib0090_set_boost(state, cfg[0] > 500); /* we want the boost if the gain is higher that 50dB */ +} + +static void dib0090_set_bbramp_pwm(struct dib0090_state *state, const u16 * cfg) +{ + state->bb_ramp = cfg; + + dib0090_set_boost(state, cfg[0] > 500); /* we want the boost if the gain is higher that 50dB */ + + dib0090_write_reg(state, 0x33, 0xffff); + dprintk("total BB gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x33)); + dib0090_write_regs(state, 0x35, cfg + 3, 4); +} + +void dib0090_pwm_gain_reset(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + /* reset the AGC */ + + if (state->config->use_pwm_agc) { +#ifdef CONFIG_BAND_SBAND + if (state->current_band == BAND_SBAND) { + dib0090_set_rframp_pwm(state, rf_ramp_pwm_sband); + dib0090_set_bbramp_pwm(state, bb_ramp_pwm_boost); + } else +#endif +#ifdef CONFIG_BAND_CBAND + if (state->current_band == BAND_CBAND) { + dib0090_set_rframp_pwm(state, rf_ramp_pwm_cband); + dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal); + } else +#endif +#ifdef CONFIG_BAND_VHF + if (state->current_band == BAND_VHF) { + dib0090_set_rframp_pwm(state, rf_ramp_pwm_vhf); + dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal); + } else +#endif + { + dib0090_set_rframp_pwm(state, rf_ramp_pwm_uhf); + dib0090_set_bbramp_pwm(state, bb_ramp_pwm_normal); + } + + if (state->rf_ramp[0] != 0) + dib0090_write_reg(state, 0x32, (3 << 11)); + else + dib0090_write_reg(state, 0x32, (0 << 11)); + + dib0090_write_reg(state, 0x39, (1 << 10)); // 0 gain by default + } +} + +EXPORT_SYMBOL(dib0090_pwm_gain_reset); +int dib0090_gain_control(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + enum frontend_tune_state *tune_state = &state->tune_state; + int ret = 10; + + u16 wbd_val = 0; + u8 apply_gain_immediatly = 1; + s16 wbd_error = 0, adc_error = 0; + + if (*tune_state == CT_AGC_START) { + state->agc_freeze = 0; + dib0090_write_reg(state, 0x04, 0x0); + +#ifdef CONFIG_BAND_SBAND + if (state->current_band == BAND_SBAND) { + dib0090_set_rframp(state, rf_ramp_sband); + dib0090_set_bbramp(state, bb_ramp_boost); + } else +#endif +#ifdef CONFIG_BAND_VHF + if (state->current_band == BAND_VHF) { + dib0090_set_rframp(state, rf_ramp_vhf); + dib0090_set_bbramp(state, bb_ramp_boost); + } else +#endif +#ifdef CONFIG_BAND_CBAND + if (state->current_band == BAND_CBAND) { + dib0090_set_rframp(state, rf_ramp_cband); + dib0090_set_bbramp(state, bb_ramp_boost); + } else +#endif + { + dib0090_set_rframp(state, rf_ramp_uhf); + dib0090_set_bbramp(state, bb_ramp_boost); + } + + dib0090_write_reg(state, 0x32, 0); + dib0090_write_reg(state, 0x39, 0); + + dib0090_wbd_target(state, state->current_rf); + + state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA; + state->current_gain = ((state->rf_ramp[0] + state->bb_ramp[0]) / 2) << GAIN_ALPHA; + + *tune_state = CT_AGC_STEP_0; + } else if (!state->agc_freeze) { + s16 wbd; + + int adc; + wbd_val = dib0090_read_reg(state, 0x1d); + + /* read and calc the wbd power */ + wbd = dib0090_wbd_to_db(state, wbd_val); + wbd_error = state->wbd_target - wbd; + + if (*tune_state == CT_AGC_STEP_0) { + if (wbd_error < 0 && state->rf_gain_limit > 0) { +#ifdef CONFIG_BAND_CBAND + /* in case of CBAND tune reduce first the lt_gain2 before adjusting the RF gain */ + u8 ltg2 = (state->rf_lt_def >> 10) & 0x7; + if (state->current_band == BAND_CBAND && ltg2) { + ltg2 >>= 1; + state->rf_lt_def &= ltg2 << 10; /* reduce in 3 steps from 7 to 0 */ + } +#endif + } else { + state->agc_step = 0; + *tune_state = CT_AGC_STEP_1; + } + } else { + /* calc the adc power */ + adc = state->config->get_adc_power(fe); + adc = (adc * ((s32) 355774) + (((s32) 1) << 20)) >> 21; /* included in [0:-700] */ + + adc_error = (s16) (((s32) ADC_TARGET) - adc); +#ifdef CONFIG_STANDARD_DAB + if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) + adc_error += 130; +#endif +#ifdef CONFIG_STANDARD_DVBT + if (state->fe->dtv_property_cache.delivery_system == STANDARD_DVBT && + (state->fe->dtv_property_cache.modulation == QAM_64 || state->fe->dtv_property_cache.modulation == QAM_16)) + adc_error += 60; +#endif +#ifdef CONFIG_SYS_ISDBT + if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) && (((state->fe->dtv_property_cache.layer[0].segment_count > + 0) + && + ((state->fe->dtv_property_cache.layer[0].modulation == + QAM_64) + || (state->fe->dtv_property_cache.layer[0]. + modulation == QAM_16))) + || + ((state->fe->dtv_property_cache.layer[1].segment_count > + 0) + && + ((state->fe->dtv_property_cache.layer[1].modulation == + QAM_64) + || (state->fe->dtv_property_cache.layer[1]. + modulation == QAM_16))) + || + ((state->fe->dtv_property_cache.layer[2].segment_count > + 0) + && + ((state->fe->dtv_property_cache.layer[2].modulation == + QAM_64) + || (state->fe->dtv_property_cache.layer[2]. + modulation == QAM_16))) + ) + ) + adc_error += 60; +#endif + + if (*tune_state == CT_AGC_STEP_1) { /* quickly go to the correct range of the ADC power */ + if (ABS(adc_error) < 50 || state->agc_step++ > 5) { + +#ifdef CONFIG_STANDARD_DAB + if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) { + dib0090_write_reg(state, 0x02, (1 << 15) | (15 << 11) | (31 << 6) | (63)); /* cap value = 63 : narrow BB filter : Fc = 1.8MHz */ + dib0090_write_reg(state, 0x04, 0x0); + } else +#endif + { + dib0090_write_reg(state, 0x02, (1 << 15) | (3 << 11) | (6 << 6) | (32)); + dib0090_write_reg(state, 0x04, 0x01); /*0 = 1KHz ; 1 = 150Hz ; 2 = 50Hz ; 3 = 50KHz ; 4 = servo fast */ + } + + *tune_state = CT_AGC_STOP; + } + } else { + /* everything higher than or equal to CT_AGC_STOP means tracking */ + ret = 100; /* 10ms interval */ + apply_gain_immediatly = 0; + } + } +#ifdef DEBUG_AGC + dprintk + ("FE: %d, tune state %d, ADC = %3ddB (ADC err %3d) WBD %3ddB (WBD err %3d, WBD val SADC: %4d), RFGainLimit (TOP): %3d, signal: %3ddBm", + (u32) fe->id, (u32) * tune_state, (u32) adc, (u32) adc_error, (u32) wbd, (u32) wbd_error, (u32) wbd_val, + (u32) state->rf_gain_limit >> WBD_ALPHA, (s32) 200 + adc - (state->current_gain >> GAIN_ALPHA)); +#endif + } + + /* apply gain */ + if (!state->agc_freeze) + dib0090_gain_apply(state, adc_error, wbd_error, apply_gain_immediatly); + return ret; +} + +EXPORT_SYMBOL(dib0090_gain_control); +void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt) +{ + struct dib0090_state *state = fe->tuner_priv; + if (rf) + *rf = state->gain[0]; + if (bb) + *bb = state->gain[1]; + if (rf_gain_limit) + *rf_gain_limit = state->rf_gain_limit; + if (rflt) + *rflt = (state->rf_lt_def >> 10) & 0x7; +} + +EXPORT_SYMBOL(dib0090_get_current_gain); +u16 dib0090_get_wbd_offset(struct dvb_frontend *tuner) +{ + struct dib0090_state *st = tuner->tuner_priv; + return st->wbd_offset; +} + +EXPORT_SYMBOL(dib0090_get_wbd_offset); +static const u16 dib0090_defaults[] = { + + 25, 0x01, + 0x0000, + 0x99a0, + 0x6008, + 0x0000, + 0x8acb, + 0x0000, + 0x0405, + 0x0000, + 0x0000, + 0x0000, + 0xb802, + 0x0300, + 0x2d12, + 0xbac0, + 0x7c00, + 0xdbb9, + 0x0954, + 0x0743, + 0x8000, + 0x0001, + 0x0040, + 0x0100, + 0x0000, + 0xe910, + 0x149e, + + 1, 0x1c, + 0xff2d, + + 1, 0x39, + 0x0000, + + 1, 0x1b, + EN_IQADC | EN_BB | EN_BIAS | EN_DIGCLK | EN_PLL | EN_CRYSTAL, + 2, 0x1e, + 0x07FF, + 0x0007, + + 1, 0x24, + EN_UHF | EN_CRYSTAL, + + 2, 0x3c, + 0x3ff, + 0x111, + 0 +}; + +static int dib0090_reset(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + u16 l, r, *n; + + dib0090_reset_digital(fe, state->config); + state->revision = dib0090_identify(fe); + + /* Revision definition */ + if (state->revision == 0xff) + return -EINVAL; +#ifdef EFUSE + else if ((state->revision & 0x1f) >= 3) /* Update the efuse : Only available for KROSUS > P1C */ + dib0090_set_EFUSE(state); +#endif + +#ifdef CONFIG_TUNER_DIB0090_P1B_SUPPORT + if (!(state->revision & 0x1)) /* it is P1B - reset is already done */ + return 0; +#endif + + /* Upload the default values */ + n = (u16 *) dib0090_defaults; + l = pgm_read_word(n++); + while (l) { + r = pgm_read_word(n++); + do { + /* DEBUG_TUNER */ + /* dprintk("%d, %d, %d", l, r, pgm_read_word(n)); */ + dib0090_write_reg(state, r, pgm_read_word(n++)); + r++; + } while (--l); + l = pgm_read_word(n++); + } + + /* Congigure in function of the crystal */ + if (state->config->io.clock_khz >= 24000) + l = 1; + else + l = 2; + dib0090_write_reg(state, 0x14, l); + dprintk("Pll lock : %d", (dib0090_read_reg(state, 0x1a) >> 11) & 0x1); + + state->reset = 3; /* enable iq-offset-calibration and wbd-calibration when tuning next time */ + + return 0; +} + +#define steps(u) (((u)>15)?((u)-16):(u)) +#define INTERN_WAIT 10 +static int dib0090_get_offset(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + int ret = INTERN_WAIT * 10; + + switch (*tune_state) { + case CT_TUNER_STEP_2: + /* Turns to positive */ + dib0090_write_reg(state, 0x1f, 0x7); + *tune_state = CT_TUNER_STEP_3; + break; + + case CT_TUNER_STEP_3: + state->adc_diff = dib0090_read_reg(state, 0x1d); + + /* Turns to negative */ + dib0090_write_reg(state, 0x1f, 0x4); + *tune_state = CT_TUNER_STEP_4; + break; + + case CT_TUNER_STEP_4: + state->adc_diff -= dib0090_read_reg(state, 0x1d); + *tune_state = CT_TUNER_STEP_5; + ret = 0; + break; + + default: + break; + } + + return ret; +} + +struct dc_calibration { + uint8_t addr; + uint8_t offset; + uint8_t pga:1; + uint16_t bb1; + uint8_t i:1; +}; + +static const struct dc_calibration dc_table[] = { + /* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */ + {0x06, 5, 1, (1 << 13) | (0 << 8) | (26 << 3), 1}, + {0x07, 11, 1, (1 << 13) | (0 << 8) | (26 << 3), 0}, + /* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */ + {0x06, 0, 0, (1 << 13) | (29 << 8) | (26 << 3), 1}, + {0x06, 10, 0, (1 << 13) | (29 << 8) | (26 << 3), 0}, + {0}, +}; + +static void dib0090_set_trim(struct dib0090_state *state) +{ + u16 *val; + + if (state->dc->addr == 0x07) + val = &state->bb7; + else + val = &state->bb6; + + *val &= ~(0x1f << state->dc->offset); + *val |= state->step << state->dc->offset; + + dib0090_write_reg(state, state->dc->addr, *val); +} + +static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + int ret = 0; + + switch (*tune_state) { + + case CT_TUNER_START: + /* init */ + dprintk("Internal DC calibration"); + + /* the LNA is off */ + dib0090_write_reg(state, 0x24, 0x02ed); + + /* force vcm2 = 0.8V */ + state->bb6 = 0; + state->bb7 = 0x040d; + + state->dc = dc_table; + + *tune_state = CT_TUNER_STEP_0; + + /* fall through */ + + case CT_TUNER_STEP_0: + dib0090_write_reg(state, 0x01, state->dc->bb1); + dib0090_write_reg(state, 0x07, state->bb7 | (state->dc->i << 7)); + + state->step = 0; + + state->min_adc_diff = 1023; + + *tune_state = CT_TUNER_STEP_1; + ret = 50; + break; + + case CT_TUNER_STEP_1: + dib0090_set_trim(state); + + *tune_state = CT_TUNER_STEP_2; + break; + + case CT_TUNER_STEP_2: + case CT_TUNER_STEP_3: + case CT_TUNER_STEP_4: + ret = dib0090_get_offset(state, tune_state); + break; + + case CT_TUNER_STEP_5: /* found an offset */ + dprintk("FE%d: IQC read=%d, current=%x", state->fe->id, (u32) state->adc_diff, state->step); + + /* first turn for this frequency */ + if (state->step == 0) { + if (state->dc->pga && state->adc_diff < 0) + state->step = 0x10; + if (state->dc->pga == 0 && state->adc_diff > 0) + state->step = 0x10; + } + + state->adc_diff = ABS(state->adc_diff); + + if (state->adc_diff < state->min_adc_diff && steps(state->step) < 15) { /* stop search when the delta to 0 is increasing */ + state->step++; + state->min_adc_diff = state->adc_diff; + *tune_state = CT_TUNER_STEP_1; + } else { + + /* the minimum was what we have seen in the step before */ + state->step--; + dib0090_set_trim(state); + + dprintk("FE%d: BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd", state->fe->id, state->dc->addr, state->adc_diff, + state->step); + + state->dc++; + if (state->dc->addr == 0) /* done */ + *tune_state = CT_TUNER_STEP_6; + else + *tune_state = CT_TUNER_STEP_0; + + } + break; + + case CT_TUNER_STEP_6: + dib0090_write_reg(state, 0x07, state->bb7 & ~0x0008); + dib0090_write_reg(state, 0x1f, 0x7); + *tune_state = CT_TUNER_START; /* reset done -> real tuning can now begin */ + state->reset &= ~0x1; + default: + break; + } + return ret; +} + +static int dib0090_wbd_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state) +{ + switch (*tune_state) { + case CT_TUNER_START: + /* WBD-mode=log, Bias=2, Gain=6, Testmode=1, en=1, WBDMUX=1 */ + dib0090_write_reg(state, 0x10, 0xdb09 | (1 << 10)); + dib0090_write_reg(state, 0x24, EN_UHF & 0x0fff); + + *tune_state = CT_TUNER_STEP_0; + return 90; /* wait for the WBDMUX to switch and for the ADC to sample */ + case CT_TUNER_STEP_0: + state->wbd_offset = dib0090_read_reg(state, 0x1d); + dprintk("WBD calibration offset = %d", state->wbd_offset); + + *tune_state = CT_TUNER_START; /* reset done -> real tuning can now begin */ + state->reset &= ~0x2; + break; + default: + break; + } + return 0; +} + +static void dib0090_set_bandwidth(struct dib0090_state *state) +{ + u16 tmp; + + if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 5000) + tmp = (3 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 6000) + tmp = (2 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 7000) + tmp = (1 << 14); + else + tmp = (0 << 14); + + state->bb_1_def &= 0x3fff; + state->bb_1_def |= tmp; + + dib0090_write_reg(state, 0x01, state->bb_1_def); /* be sure that we have the right bb-filter */ +} + +static const struct dib0090_pll dib0090_pll_table[] = { +#ifdef CONFIG_BAND_CBAND + {56000, 0, 9, 48, 6}, + {70000, 1, 9, 48, 6}, + {87000, 0, 8, 32, 4}, + {105000, 1, 8, 32, 4}, + {115000, 0, 7, 24, 6}, + {140000, 1, 7, 24, 6}, + {170000, 0, 6, 16, 4}, +#endif +#ifdef CONFIG_BAND_VHF + {200000, 1, 6, 16, 4}, + {230000, 0, 5, 12, 6}, + {280000, 1, 5, 12, 6}, + {340000, 0, 4, 8, 4}, + {380000, 1, 4, 8, 4}, + {450000, 0, 3, 6, 6}, +#endif +#ifdef CONFIG_BAND_UHF + {580000, 1, 3, 6, 6}, + {700000, 0, 2, 4, 4}, + {860000, 1, 2, 4, 4}, +#endif +#ifdef CONFIG_BAND_LBAND + {1800000, 1, 0, 2, 4}, +#endif +#ifdef CONFIG_BAND_SBAND + {2900000, 0, 14, 1, 4}, +#endif +}; + +static const struct dib0090_tuning dib0090_tuning_table_fm_vhf_on_cband[] = { + +#ifdef CONFIG_BAND_CBAND + {184000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, + {227000, 4, 3, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, + {380000, 4, 7, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, +#endif +#ifdef CONFIG_BAND_UHF + {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, +#endif +#ifdef CONFIG_BAND_LBAND + {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, +#endif +#ifdef CONFIG_BAND_SBAND + {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD}, + {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD}, +#endif +}; + +static const struct dib0090_tuning dib0090_tuning_table[] = { + +#ifdef CONFIG_BAND_CBAND + {170000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB}, +#endif +#ifdef CONFIG_BAND_VHF + {184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, + {227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, + {380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF}, +#endif +#ifdef CONFIG_BAND_UHF + {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, + {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF}, +#endif +#ifdef CONFIG_BAND_LBAND + {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, + {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD}, +#endif +#ifdef CONFIG_BAND_SBAND + {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD}, + {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD}, +#endif +}; + +#define WBD 0x781 /* 1 1 1 1 0000 0 0 1 */ +static int dib0090_tune(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + const struct dib0090_tuning *tune = state->current_tune_table_index; + const struct dib0090_pll *pll = state->current_pll_table_index; + enum frontend_tune_state *tune_state = &state->tune_state; + + u32 rf; + u16 lo4 = 0xe900, lo5, lo6, Den; + u32 FBDiv, Rest, FREF, VCOF_kHz = 0; + u16 tmp, adc; + int8_t step_sign; + int ret = 10; /* 1ms is the default delay most of the time */ + u8 c, i; + + state->current_band = (u8) BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000); + rf = fe->dtv_property_cache.frequency / 1000 + (state->current_band == + BAND_UHF ? state->config->freq_offset_khz_uhf : state->config->freq_offset_khz_vhf); + /* in any case we first need to do a reset if needed */ + if (state->reset & 0x1) + return dib0090_dc_offset_calibration(state, tune_state); + else if (state->reset & 0x2) + return dib0090_wbd_calibration(state, tune_state); + + /************************* VCO ***************************/ + /* Default values for FG */ + /* from these are needed : */ + /* Cp,HFdiv,VCOband,SD,Num,Den,FB and REFDiv */ + +#ifdef CONFIG_SYS_ISDBT + if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1) + rf += 850; +#endif + + if (state->current_rf != rf) { + state->tuner_is_tuned = 0; + + tune = dib0090_tuning_table; + + tmp = (state->revision >> 5) & 0x7; + if (tmp == 0x4 || tmp == 0x7) { + /* CBAND tuner version for VHF */ + if (state->current_band == BAND_FM || state->current_band == BAND_VHF) { + /* Force CBAND */ + state->current_band = BAND_CBAND; + tune = dib0090_tuning_table_fm_vhf_on_cband; + } + } + + pll = dib0090_pll_table; + /* Look for the interval */ + while (rf > tune->max_freq) + tune++; + while (rf > pll->max_freq) + pll++; + state->current_tune_table_index = tune; + state->current_pll_table_index = pll; + } + + if (*tune_state == CT_TUNER_START) { + + if (state->tuner_is_tuned == 0) + state->current_rf = 0; + + if (state->current_rf != rf) { + + dib0090_write_reg(state, 0x0b, 0xb800 | (tune->switch_trim)); + + /* external loop filter, otherwise: + * lo5 = (0 << 15) | (0 << 12) | (0 << 11) | (3 << 9) | (4 << 6) | (3 << 4) | 4; + * lo6 = 0x0e34 */ + if (pll->vco_band) + lo5 = 0x049e; + else if (state->config->analog_output) + lo5 = 0x041d; + else + lo5 = 0x041c; + + lo5 |= (pll->hfdiv_code << 11) | (pll->vco_band << 7); /* bit 15 is the split to the slave, we do not do it here */ + + if (!state->config->io.pll_int_loop_filt) + lo6 = 0xff28; + else + lo6 = (state->config->io.pll_int_loop_filt << 3); + + VCOF_kHz = (pll->hfdiv * rf) * 2; + + FREF = state->config->io.clock_khz; + + FBDiv = (VCOF_kHz / pll->topresc / FREF); + Rest = (VCOF_kHz / pll->topresc) - FBDiv * FREF; + + if (Rest < LPF) + Rest = 0; + else if (Rest < 2 * LPF) + Rest = 2 * LPF; + else if (Rest > (FREF - LPF)) { + Rest = 0; + FBDiv += 1; + } else if (Rest > (FREF - 2 * LPF)) + Rest = FREF - 2 * LPF; + Rest = (Rest * 6528) / (FREF / 10); + + Den = 1; + + dprintk(" ***** ******* Rest value = %d", Rest); + + if (Rest > 0) { + if (state->config->analog_output) + lo6 |= (1 << 2) | 2; + else + lo6 |= (1 << 2) | 1; + Den = 255; + } +#ifdef CONFIG_BAND_SBAND + if (state->current_band == BAND_SBAND) + lo6 &= 0xfffb; +#endif + + dib0090_write_reg(state, 0x15, (u16) FBDiv); + + dib0090_write_reg(state, 0x16, (Den << 8) | 1); + + dib0090_write_reg(state, 0x17, (u16) Rest); + + dib0090_write_reg(state, 0x19, lo5); + + dib0090_write_reg(state, 0x1c, lo6); + + lo6 = tune->tuner_enable; + if (state->config->analog_output) + lo6 = (lo6 & 0xff9f) | 0x2; + + dib0090_write_reg(state, 0x24, lo6 | EN_LO +#ifdef CONFIG_DIB0090_USE_PWM_AGC + | state->config->use_pwm_agc * EN_CRYSTAL +#endif + ); + + state->current_rf = rf; + + /* prepare a complete captrim */ + state->step = state->captrim = state->fcaptrim = 64; + + } else { /* we are already tuned to this frequency - the configuration is correct */ + + /* do a minimal captrim even if the frequency has not changed */ + state->step = 4; + state->captrim = state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7f; + } + state->adc_diff = 3000; + + dib0090_write_reg(state, 0x10, 0x2B1); + + dib0090_write_reg(state, 0x1e, 0x0032); + + ret = 20; + *tune_state = CT_TUNER_STEP_1; + } else if (*tune_state == CT_TUNER_STEP_0) { + /* nothing */ + } else if (*tune_state == CT_TUNER_STEP_1) { + state->step /= 2; + dib0090_write_reg(state, 0x18, lo4 | state->captrim); + *tune_state = CT_TUNER_STEP_2; + } else if (*tune_state == CT_TUNER_STEP_2) { + + adc = dib0090_read_reg(state, 0x1d); + dprintk("FE %d CAPTRIM=%d; ADC = %d (ADC) & %dmV", (u32) fe->id, (u32) state->captrim, (u32) adc, + (u32) (adc) * (u32) 1800 / (u32) 1024); + + if (adc >= 400) { + adc -= 400; + step_sign = -1; + } else { + adc = 400 - adc; + step_sign = 1; + } + + if (adc < state->adc_diff) { + dprintk("FE %d CAPTRIM=%d is closer to target (%d/%d)", (u32) fe->id, (u32) state->captrim, (u32) adc, (u32) state->adc_diff); + state->adc_diff = adc; + state->fcaptrim = state->captrim; + + } + + state->captrim += step_sign * state->step; + if (state->step >= 1) + *tune_state = CT_TUNER_STEP_1; + else + *tune_state = CT_TUNER_STEP_3; + + ret = 15; + } else if (*tune_state == CT_TUNER_STEP_3) { + /*write the final cptrim config */ + dib0090_write_reg(state, 0x18, lo4 | state->fcaptrim); + +#ifdef CONFIG_TUNER_DIB0090_CAPTRIM_MEMORY + state->memory[state->memory_index].cap = state->fcaptrim; +#endif + + *tune_state = CT_TUNER_STEP_4; + } else if (*tune_state == CT_TUNER_STEP_4) { + dib0090_write_reg(state, 0x1e, 0x07ff); + + dprintk("FE %d Final Captrim: %d", (u32) fe->id, (u32) state->fcaptrim); + dprintk("FE %d HFDIV code: %d", (u32) fe->id, (u32) pll->hfdiv_code); + dprintk("FE %d VCO = %d", (u32) fe->id, (u32) pll->vco_band); + dprintk("FE %d VCOF in kHz: %d ((%d*%d) << 1))", (u32) fe->id, (u32) ((pll->hfdiv * rf) * 2), (u32) pll->hfdiv, (u32) rf); + dprintk("FE %d REFDIV: %d, FREF: %d", (u32) fe->id, (u32) 1, (u32) state->config->io.clock_khz); + dprintk("FE %d FBDIV: %d, Rest: %d", (u32) fe->id, (u32) dib0090_read_reg(state, 0x15), (u32) dib0090_read_reg(state, 0x17)); + dprintk("FE %d Num: %d, Den: %d, SD: %d", (u32) fe->id, (u32) dib0090_read_reg(state, 0x17), + (u32) (dib0090_read_reg(state, 0x16) >> 8), (u32) dib0090_read_reg(state, 0x1c) & 0x3); + + c = 4; + i = 3; +#if defined(CONFIG_BAND_LBAND) || defined(CONFIG_BAND_SBAND) + if ((state->current_band == BAND_LBAND) || (state->current_band == BAND_SBAND)) { + c = 2; + i = 2; + } +#endif + dib0090_write_reg(state, 0x10, (c << 13) | (i << 11) | (WBD +#ifdef CONFIG_DIB0090_USE_PWM_AGC + | (state->config->use_pwm_agc << 1) +#endif + )); + dib0090_write_reg(state, 0x09, (tune->lna_tune << 5) | (tune->lna_bias << 0)); + dib0090_write_reg(state, 0x0c, tune->v2i); + dib0090_write_reg(state, 0x0d, tune->mix); + dib0090_write_reg(state, 0x0e, tune->load); + + *tune_state = CT_TUNER_STEP_5; + } else if (*tune_state == CT_TUNER_STEP_5) { + + /* initialize the lt gain register */ + state->rf_lt_def = 0x7c00; + dib0090_write_reg(state, 0x0f, state->rf_lt_def); + + dib0090_set_bandwidth(state); + state->tuner_is_tuned = 1; + *tune_state = CT_TUNER_STOP; + } else + ret = FE_CALLBACK_TIME_NEVER; + return ret; +} + +static int dib0090_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe) +{ + struct dib0090_state *state = fe->tuner_priv; + + return state->tune_state; +} + +EXPORT_SYMBOL(dib0090_get_tune_state); + +int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + struct dib0090_state *state = fe->tuner_priv; + + state->tune_state = tune_state; + return 0; +} + +EXPORT_SYMBOL(dib0090_set_tune_state); + +static int dib0090_get_frequency(struct dvb_frontend *fe, u32 * frequency) +{ + struct dib0090_state *state = fe->tuner_priv; + + *frequency = 1000 * state->current_rf; + return 0; +} + +static int dib0090_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) +{ + struct dib0090_state *state = fe->tuner_priv; + uint32_t ret; + + state->tune_state = CT_TUNER_START; + + do { + ret = dib0090_tune(fe); + if (ret != FE_CALLBACK_TIME_NEVER) + msleep(ret / 10); + else + break; + } while (state->tune_state != CT_TUNER_STOP); + + return 0; +} + +static const struct dvb_tuner_ops dib0090_ops = { + .info = { + .name = "DiBcom DiB0090", + .frequency_min = 45000000, + .frequency_max = 860000000, + .frequency_step = 1000, + }, + .release = dib0090_release, + + .init = dib0090_wakeup, + .sleep = dib0090_sleep, + .set_params = dib0090_set_params, + .get_frequency = dib0090_get_frequency, +}; + +struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config) +{ + struct dib0090_state *st = kzalloc(sizeof(struct dib0090_state), GFP_KERNEL); + if (st == NULL) + return NULL; + + st->config = config; + st->i2c = i2c; + st->fe = fe; + fe->tuner_priv = st; + + if (dib0090_reset(fe) != 0) + goto free_mem; + + printk(KERN_INFO "DiB0090: successfully identified\n"); + memcpy(&fe->ops.tuner_ops, &dib0090_ops, sizeof(struct dvb_tuner_ops)); + + return fe; + free_mem: + kfree(st); + fe->tuner_priv = NULL; + return NULL; +} + +EXPORT_SYMBOL(dib0090_register); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_AUTHOR("Olivier Grenie "); +MODULE_DESCRIPTION("Driver for the DiBcom 0090 base-band RF Tuner"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/dib0090.h b/drivers/media/dvb/frontends/dib0090.h new file mode 100644 index 0000000..d72b7d7 --- /dev/null +++ b/drivers/media/dvb/frontends/dib0090.h @@ -0,0 +1,114 @@ +/* + * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner. + * + * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#ifndef DIB0090_H +#define DIB0090_H + +struct dvb_frontend; +struct i2c_adapter; + +#define DEFAULT_DIB0090_I2C_ADDRESS 0x60 + +struct dib0090_io_config { + u32 clock_khz; + + u8 pll_bypass:1; + u8 pll_range:1; + u8 pll_prediv:6; + u8 pll_loopdiv:6; + + u8 adc_clock_ratio; /* valid is 8, 7 ,6 */ + u16 pll_int_loop_filt; // internal loop filt value. If not fill in , default is 8165 +}; + +struct dib0090_config { + struct dib0090_io_config io; + int (*reset) (struct dvb_frontend *, int); + int (*sleep) (struct dvb_frontend *, int); + + /* offset in kHz */ + int freq_offset_khz_uhf; + int freq_offset_khz_vhf; + + int (*get_adc_power) (struct dvb_frontend *); + + u8 clkouttobamse:1; /* activate or deactivate clock output */ + u8 analog_output; + + u8 i2c_address; + /* add drives and other things if necessary */ + u16 wbd_vhf_offset; + u16 wbd_cband_offset; + u8 use_pwm_agc; + u8 clkoutdrive; +}; + +#if defined(CONFIG_DVB_TUNER_DIB0090) || (defined(CONFIG_DVB_TUNER_DIB0090_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config); +extern void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast); +extern void dib0090_pwm_gain_reset(struct dvb_frontend *fe); +extern u16 dib0090_get_wbd_offset(struct dvb_frontend *tuner); +extern int dib0090_gain_control(struct dvb_frontend *fe); +extern enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe); +extern int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state); +extern enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe); +extern void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt); +#else +static inline struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0090_config *config) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline void dib0090_pwm_gain_reset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline u16 dib0090_get_wbd_offset(struct dvb_frontend *tuner) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline int dib0090_gain_control(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return CT_DONE; +} + +static inline int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +static inline num frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +return CT_SHUTDOWN,} + +static inline void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} +#endif + +#endif diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c index 898400d..b924e7e 100644 --- a/drivers/media/dvb/frontends/dib8000.c +++ b/drivers/media/dvb/frontends/dib8000.c @@ -28,18 +28,6 @@ MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); #define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0) -enum frontend_tune_state { - CT_AGC_START = 20, - CT_AGC_STEP_0, - CT_AGC_STEP_1, - CT_AGC_STEP_2, - CT_AGC_STEP_3, - CT_AGC_STEP_4, - CT_AGC_STOP, - - CT_DEMOD_START = 30, -}; - #define FE_STATUS_TUNE_FAILED 0 struct i2c_device { @@ -852,6 +840,14 @@ static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) return 0; } +void dib8000_pwm_agc_reset(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + dib8000_set_adc_state(state, DIBX000_ADC_ON); + dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))); +} +EXPORT_SYMBOL(dib8000_pwm_agc_reset); + static int dib8000_agc_soft_split(struct dib8000_state *state) { u16 agc, split_offset; @@ -939,6 +935,32 @@ static int dib8000_agc_startup(struct dvb_frontend *fe) } +static const int32_t lut_1000ln_mant[] = +{ + 908,7003,7090,7170,7244,7313,7377,7438,7495,7549,7600 +}; + +int32_t dib8000_get_adc_power(struct dvb_frontend *fe, uint8_t mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + uint32_t ix =0, tmp_val =0, exp = 0, mant = 0; + int32_t val; + + val = dib8000_read32(state, 384); + /* mode = 1 : ln_agcpower calc using mant-exp conversion and mantis look up table */ + if(mode) { + tmp_val = val; + while(tmp_val>>=1) + exp++; + mant = (val * 1000 / (1<timf = dib8000_read32(state, 435); @@ -1854,6 +1876,24 @@ static int dib8000_sleep(struct dvb_frontend *fe) } } +enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend* fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + return state->tune_state; +} +EXPORT_SYMBOL(dib8000_get_tune_state); + +int dib8000_set_tune_state(struct dvb_frontend* fe, enum frontend_tune_state tune_state) +{ + struct dib8000_state *state = fe->demodulator_priv; + state->tune_state = tune_state; + return 0; +} +EXPORT_SYMBOL(dib8000_set_tune_state); + + + + static int dib8000_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) { struct dib8000_state *state = fe->demodulator_priv; diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h index 8c89482..de05a0a 100644 --- a/drivers/media/dvb/frontends/dib8000.h +++ b/drivers/media/dvb/frontends/dib8000.h @@ -46,6 +46,10 @@ extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value); extern int dib8000_pid_filter_ctrl(struct dvb_frontend *, u8 onoff); extern int dib8000_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff); +extern int dib8000_set_tune_state(struct dvb_frontend* fe, enum frontend_tune_state tune_state); +extern enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend* fe); +extern void dib8000_pwm_agc_reset(struct dvb_frontend *fe); +extern s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode); #else static inline struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg) { @@ -59,35 +63,53 @@ static inline struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe return NULL; } -int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr) +static inline int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } -int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +static inline int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } -int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) +static inline int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } -int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +static inline int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } -int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +static inline int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } +static inline int dib8000_set_tune_state(struct dvb_frontend* fe, enum frontend_tune_state tune_state) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend* fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return CT_SHUTDOWN, +} +static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} +static inline s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} #endif #endif diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c index 4efca30..e6f3d73 100644 --- a/drivers/media/dvb/frontends/dibx000_common.c +++ b/drivers/media/dvb/frontends/dibx000_common.c @@ -6,7 +6,7 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); -#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiBX000: "); printk(args); } } while (0) +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiBX000: "); printk(args); printk("\n"); } } while (0) static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val) { @@ -25,7 +25,7 @@ static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf) { if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) { - dprintk("selecting interface: %d\n", intf); + dprintk("selecting interface: %d", intf); mst->selected_interface = intf; return dibx000_write_word(mst, mst->base_reg + 4, intf); } @@ -171,9 +171,18 @@ void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst) { i2c_del_adapter(&mst->gated_tuner_i2c_adap); } - EXPORT_SYMBOL(dibx000_exit_i2c_master); + +u32 systime() +{ + struct timespec t; + + t = current_kernel_time(); + return (t.tv_sec * 10000) + (t.tv_nsec / 100000); +} +EXPORT_SYMBOL(systime); + MODULE_AUTHOR("Patrick Boettcher "); MODULE_DESCRIPTION("Common function the DiBcom demodulator family"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h index 5be10ec..06328d8 100644 --- a/drivers/media/dvb/frontends/dibx000_common.h +++ b/drivers/media/dvb/frontends/dibx000_common.h @@ -36,13 +36,17 @@ extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst); extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst); +extern u32 systime(void); + #define BAND_LBAND 0x01 #define BAND_UHF 0x02 #define BAND_VHF 0x04 #define BAND_SBAND 0x08 -#define BAND_FM 0x10 +#define BAND_FM 0x10 +#define BAND_CBAND 0x20 -#define BAND_OF_FREQUENCY(freq_kHz) ( (freq_kHz) <= 115000 ? BAND_FM : \ +#define BAND_OF_FREQUENCY(freq_kHz) ( (freq_kHz) <= 170000 ? BAND_CBAND : \ + (freq_kHz) <= 115000 ? BAND_FM : \ (freq_kHz) <= 250000 ? BAND_VHF : \ (freq_kHz) <= 863000 ? BAND_UHF : \ (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND ) @@ -149,4 +153,67 @@ enum dibx000_adc_states { #define OUTMODE_MPEG2_FIFO 5 #define OUTMODE_ANALOG_ADC 6 +enum frontend_tune_state { + CT_TUNER_START = 10, + CT_TUNER_STEP_0, + CT_TUNER_STEP_1, + CT_TUNER_STEP_2, + CT_TUNER_STEP_3, + CT_TUNER_STEP_4, + CT_TUNER_STEP_5, + CT_TUNER_STEP_6, + CT_TUNER_STEP_7, + CT_TUNER_STOP, + + CT_AGC_START = 20, + CT_AGC_STEP_0, + CT_AGC_STEP_1, + CT_AGC_STEP_2, + CT_AGC_STEP_3, + CT_AGC_STEP_4, + CT_AGC_STOP, + + CT_DEMOD_START = 30, + CT_DEMOD_STEP_1, + CT_DEMOD_STEP_2, + CT_DEMOD_STEP_3, + CT_DEMOD_STEP_4, + CT_DEMOD_STEP_5, + CT_DEMOD_STEP_6, + CT_DEMOD_STEP_7, + CT_DEMOD_STEP_8, + CT_DEMOD_STEP_9, + CT_DEMOD_STEP_10, + CT_DEMOD_SEARCH_NEXT = 41, + CT_DEMOD_STEP_LOCKED, + CT_DEMOD_STOP, + + CT_DONE = 100, + CT_SHUTDOWN, + +}; + +struct dvb_frontend_parametersContext { +#define CHANNEL_STATUS_PARAMETERS_UNKNOWN 0x01 +#define CHANNEL_STATUS_PARAMETERS_SET 0x02 + u8 status; + u32 tune_time_estimation[2]; + s32 tps_available; + u16 tps[9]; +}; + +#define FE_STATUS_TUNE_FAILED 0 +#define FE_STATUS_TUNE_TIMED_OUT -1 +#define FE_STATUS_TUNE_TIME_TOO_SHORT -2 +#define FE_STATUS_TUNE_PENDING -3 +#define FE_STATUS_STD_SUCCESS -4 +#define FE_STATUS_FFT_SUCCESS -5 +#define FE_STATUS_DEMOD_SUCCESS -6 +#define FE_STATUS_LOCKED -7 +#define FE_STATUS_DATA_LOCKED -8 + +#define FE_CALLBACK_TIME_NEVER 0xffffffff + +#define ABS(x) ((x<0)?(-x):(x)) + #endif -- 2.7.4