From 0253735f503ac502fa775e96375d2f6c192bfe07 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Sun, 24 Mar 2019 22:02:05 +0530 Subject: [PATCH] arm64: dts: qcom: qcs404: Enable ethernet for EVB-4000 EVB-4000 comes with ethernet so enable it and add pinctrl bindings. Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 82 ++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 11269ad..8234cff 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -3,9 +3,91 @@ /dts-v1/; +#include #include "qcs404-evb.dtsi" / { model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; compatible = "qcom,qcs404-evb"; }; + +ðernet { + status = "ok"; + + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x4>; + }; + }; +}; + +&tlmm { + ethernet_defaults: ethernet-defaults { + int { + pins = "gpio61"; + function = "rgmii_int"; + bias-disable; + drive-strength = <2>; + }; + mdc { + pins = "gpio76"; + function = "rgmii_mdc"; + bias-pull-up; + }; + mdio { + pins = "gpio75"; + function = "rgmii_mdio"; + bias-pull-up; + }; + tx { + pins = "gpio67", "gpio66", "gpio65", "gpio64"; + function = "rgmii_tx"; + bias-pull-up; + drive-strength = <16>; + }; + rx { + pins = "gpio73", "gpio72", "gpio71", "gpio70"; + function = "rgmii_rx"; + bias-disable; + drive-strength = <2>; + }; + tx-ctl { + pins = "gpio68"; + function = "rgmii_ctl"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ctl { + pins = "gpio74"; + function = "rgmii_ctl"; + bias-disable; + drive-strength = <2>; + }; + tx-ck { + pins = "gpio63"; + function = "rgmii_ck"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ck { + pins = "gpio69"; + function = "rgmii_ck"; + bias-disable; + drive-strength = <2>; + }; + }; +}; -- 2.7.4