From 0224d45c9d46401b6d7018a96cfe049c5da7d91c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 11 Oct 2017 11:41:20 +0200 Subject: [PATCH] i2c-cht-wc: Add device-properties for fusb302 integration Add device-properties to make the bq24292i charger connected to the bus get its input-current-limit from the fusb302 Type-C port controller which is used on boards with the cht-wc PMIC, as well as regulator_init_data for the 5V boost converter on the bq24292i. Since this means we now hook-up the bq24292i to the fusb302 Type-C port controller add a check for the ACPI device which instantiates the fusb302. Signed-off-by: Hans de Goede Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 5 ++++ drivers/i2c/busses/i2c-cht-wc.c | 51 +++++++++++++++++++++++++++++++++++------ 2 files changed, 49 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 45a3f3ca..009345d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -198,6 +198,11 @@ config I2C_CHT_WC SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC found on some Intel Cherry Trail systems. + Note this controller is hooked up to a TI bq24292i charger-IC, + combined with a FUSB302 Type-C port-controller as such it is advised + to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m + (the fusb302 driver currently is in drivers/staging). + config I2C_NFORCE2 tristate "Nvidia nForce2, nForce3 and nForce4" depends on PCI diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 190bbbc..0d05dad 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -16,6 +16,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -25,6 +26,7 @@ #include #include #include +#include #include #define CHT_WC_I2C_CTRL 0x5e24 @@ -232,13 +234,35 @@ static const struct irq_chip cht_wc_i2c_irq_chip = { .name = "cht_wc_ext_chrg_irq_chip", }; +static const char * const bq24190_suppliers[] = { "fusb302-typec-source" }; + static const struct property_entry bq24190_props[] = { - PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers), PROPERTY_ENTRY_BOOL("omit-battery-class"), PROPERTY_ENTRY_BOOL("disable-reset"), { } }; +static struct regulator_consumer_supply fusb302_consumer = { + .supply = "vbus", + /* Must match fusb302 dev_name in intel_cht_int33fe.c */ + .dev_name = "i2c-fusb302", +}; + +static const struct regulator_init_data bq24190_vbus_init_data = { + .constraints = { + /* The name is used in intel_cht_int33fe.c do not change. */ + .name = "cht_wc_usb_typec_vbus", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &fusb302_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq24190_platform_data bq24190_pdata = { + .regulator_init_data = &bq24190_vbus_init_data, +}; + static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); @@ -246,7 +270,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) struct i2c_board_info board_info = { .type = "bq24190", .addr = 0x6b, + .dev_name = "bq24190", .properties = bq24190_props, + .platform_data = &bq24190_pdata, }; int ret, reg, irq; @@ -314,11 +340,21 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) if (ret) goto remove_irq_domain; - board_info.irq = adap->client_irq; - adap->client = i2c_new_device(&adap->adapter, &board_info); - if (!adap->client) { - ret = -ENOMEM; - goto del_adapter; + /* + * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger, + * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302 + * USB Type-C controller connected to another i2c bus. In this setup + * the max17047 and fusb302 devices are enumerated through an INT33FE + * ACPI device. If this device is present register an i2c-client for + * the TI bq24292i charger. + */ + if (acpi_dev_present("INT33FE", NULL, -1)) { + board_info.irq = adap->client_irq; + adap->client = i2c_new_device(&adap->adapter, &board_info); + if (!adap->client) { + ret = -ENOMEM; + goto del_adapter; + } } platform_set_drvdata(pdev, adap); @@ -335,7 +371,8 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) { struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev); - i2c_unregister_device(adap->client); + if (adap->client) + i2c_unregister_device(adap->client); i2c_del_adapter(&adap->adapter); irq_domain_remove(adap->irq_domain); -- 2.7.4