From 01e6f8ad8d26ced14b0cf288c42e55d03a7c5070 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Sun, 30 Jul 2023 09:41:13 +0200 Subject: [PATCH] net: dsa: qca8k: use dsa_for_each macro instead of for loop Convert for loop to dsa_for_each macro to save some redundant write on unconnected/unused port and tidy things up. Signed-off-by: Christian Marangi Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20230730074113.21889-5-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/dsa/qca/qca8k-8xxx.c | 107 ++++++++++++++++++++------------------- 1 file changed, 54 insertions(+), 53 deletions(-) diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index f2cf8f7..de1dc22 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -1800,7 +1800,8 @@ static int qca8k_setup(struct dsa_switch *ds) { struct qca8k_priv *priv = ds->priv; - int cpu_port, ret, i; + struct dsa_port *dp; + int cpu_port, ret; u32 mask; cpu_port = qca8k_find_cpu_port(ds); @@ -1855,27 +1856,27 @@ qca8k_setup(struct dsa_switch *ds) dev_warn(priv->dev, "mib init failed"); /* Initial setup of all ports */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) { + dsa_switch_for_each_port(dp, ds) { /* Disable forwarding by default on all ports */ - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(dp->index), QCA8K_PORT_LOOKUP_MEMBER, 0); if (ret) return ret; + } - /* Enable QCA header mode on all cpu ports */ - if (dsa_is_cpu_port(ds, i)) { - ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), - FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | - FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); - if (ret) { - dev_err(priv->dev, "failed enabling QCA header mode"); - return ret; - } + /* Disable MAC by default on all user ports */ + dsa_switch_for_each_user_port(dp, ds) + qca8k_port_set_status(priv, dp->index, 0); + + /* Enable QCA header mode on all cpu ports */ + dsa_switch_for_each_cpu_port(dp, ds) { + ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(dp->index), + FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | + FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); + if (ret) { + dev_err(priv->dev, "failed enabling QCA header mode on port %d", dp->index); + return ret; } - - /* Disable MAC by default on all user ports */ - if (dsa_is_user_port(ds, i)) - qca8k_port_set_status(priv, i, 0); } /* Forward all unknown frames to CPU port for Linux processing @@ -1897,48 +1898,48 @@ qca8k_setup(struct dsa_switch *ds) return ret; /* Setup connection between CPU port & user ports - * Configure specific switch configuration for ports + * Individual user ports get connected to CPU port only */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - /* Individual user ports get connected to CPU port only */ - if (dsa_is_user_port(ds, i)) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_MEMBER, - BIT(cpu_port)); - if (ret) - return ret; - - ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_LEARN); - if (ret) - return ret; - - /* For port based vlans to work we need to set the - * default egress vid - */ - ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), - QCA8K_EGREES_VLAN_PORT_MASK(i), - QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF)); - if (ret) - return ret; - - ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i), - QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | - QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); - if (ret) - return ret; - } + dsa_switch_for_each_user_port(dp, ds) { + u8 port = dp->index; + + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), + QCA8K_PORT_LOOKUP_MEMBER, + BIT(cpu_port)); + if (ret) + return ret; + + ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port), + QCA8K_PORT_LOOKUP_LEARN); + if (ret) + return ret; - /* The port 5 of the qca8337 have some problem in flood condition. The - * original legacy driver had some specific buffer and priority settings - * for the different port suggested by the QCA switch team. Add this - * missing settings to improve switch stability under load condition. - * This problem is limited to qca8337 and other qca8k switch are not affected. + /* For port based vlans to work we need to set the + * default egress vid */ - if (priv->switch_id == QCA8K_ID_QCA8337) - qca8k_setup_hol_fixup(priv, i); + ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port), + QCA8K_EGREES_VLAN_PORT_MASK(port), + QCA8K_EGREES_VLAN_PORT(port, QCA8K_PORT_VID_DEF)); + if (ret) + return ret; + + ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port), + QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | + QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); + if (ret) + return ret; } + /* The port 5 of the qca8337 have some problem in flood condition. The + * original legacy driver had some specific buffer and priority settings + * for the different port suggested by the QCA switch team. Add this + * missing settings to improve switch stability under load condition. + * This problem is limited to qca8337 and other qca8k switch are not affected. + */ + if (priv->switch_id == QCA8K_ID_QCA8337) + dsa_switch_for_each_available_port(dp, ds) + qca8k_setup_hol_fixup(priv, dp->index); + /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ if (priv->switch_id == QCA8K_ID_QCA8327) { mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | -- 2.7.4