From 01799b622217ffebdc95e8e0aedbd4cff6a35a50 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:22 +0300 Subject: [PATCH] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX New platform uses RBCPR hardware feature, with that voting for absolute voltage of VDD CX is not required. Hence vote for corner of VDD CX which uses nominal corner voltage on VDD CX. Signed-off-by: Ivan T. Ivanov Cc: Mayank Rana Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/msm-hsusb.txt | 5 ++++ drivers/usb/phy/phy-msm-usb.c | 35 +++++++++++++++++----- include/linux/usb/msm_hsusb.h | 1 + 3 files changed, 33 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 0669667..2826f2a 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -65,6 +65,10 @@ Optional properties: Some platforms may have configuration to allow USB controller work with any of the two HSPHYs present. +- qcom,vdd-levels: This property must be a list of three integer values + (no, min, max) where each value represents either a voltage + in microvolts or a value corresponding to voltage corner. + Example HSUSB OTG controller device node: usb@f9a55000 { @@ -87,4 +91,5 @@ Example HSUSB OTG controller device node: qcom,otg-control = <1>; qcom,phy-init-sequence = < -1 0x63 >; + qcom,vdd-levels = <1 5 7>; }; diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 366527e..8e7956e 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -62,6 +62,13 @@ #define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ #define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ +#define USB_PHY_SUSP_DIG_VOL 500000 /* uV */ + +enum vdd_levels { + VDD_LEVEL_NONE = 0, + VDD_LEVEL_MIN, + VDD_LEVEL_MAX, +}; static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) { @@ -69,8 +76,8 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) if (init) { ret = regulator_set_voltage(motg->vddcx, - USB_PHY_VDD_DIG_VOL_MIN, - USB_PHY_VDD_DIG_VOL_MAX); + motg->vdd_levels[VDD_LEVEL_MIN], + motg->vdd_levels[VDD_LEVEL_MAX]); if (ret) { dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); return ret; @@ -81,7 +88,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); } else { ret = regulator_set_voltage(motg->vddcx, 0, - USB_PHY_VDD_DIG_VOL_MAX); + motg->vdd_levels[VDD_LEVEL_MAX]); if (ret) dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); ret = regulator_disable(motg->vddcx); @@ -435,17 +442,16 @@ static int msm_phy_init(struct usb_phy *phy) #ifdef CONFIG_PM -#define USB_PHY_SUSP_DIG_VOL 500000 static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high) { - int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int max_vol = motg->vdd_levels[VDD_LEVEL_MAX]; int min_vol; int ret; if (high) - min_vol = USB_PHY_VDD_DIG_VOL_MIN; + min_vol = motg->vdd_levels[VDD_LEVEL_MIN]; else - min_vol = USB_PHY_SUSP_DIG_VOL; + min_vol = motg->vdd_levels[VDD_LEVEL_NONE]; ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol); if (ret) { @@ -1441,7 +1447,7 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) struct device_node *node = pdev->dev.of_node; struct property *prop; int len, ret, words; - u32 val; + u32 val, tmp[3]; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -1472,6 +1478,19 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2) motg->phy_number = val; + motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL; + motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN; + motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX; + + if (of_get_property(node, "qcom,vdd-levels", &len) && + len == sizeof(tmp)) { + of_property_read_u32_array(node, "qcom,vdd-levels", + tmp, len / sizeof(*tmp)); + motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE]; + motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN]; + motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; + } + prop = of_find_property(node, "qcom,phy-init-sequence", &len); if (!prop || !len) return 0; diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 4628f1a..b0a3924 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -169,6 +169,7 @@ struct msm_otg { struct reset_control *phy_rst; struct reset_control *link_rst; + int vdd_levels[3]; }; #endif -- 2.7.4