From 002cb2d2f1dde524b2aef6e43922984f6d1c8adc Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 16 Apr 2010 21:29:20 +0400 Subject: [PATCH] DA830 EVM: use DA8XX_AEMIF_*_BASE #define's The board file #define's its own version of EMIFA base addresses, while there are DA8XX_AEMIF_*_BASE macros #define'd in . Start using them instead. Signed-off-by: Sergei Shtylyov Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da830-evm.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 9257056..8f079d2 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -33,9 +33,6 @@ #define DA830_EVM_PHY_MASK 0x0 #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ -#define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000 -#define DA830_EMIF25_CONTROL_BASE 0x68000000 - /* * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. */ @@ -375,13 +372,13 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { static struct resource da830_evm_nand_resources[] = { [0] = { /* First memory resource is NAND I/O window */ - .start = DA830_EMIF25_ASYNC_DATA_CE3_BASE, - .end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1, + .start = DA8XX_AEMIF_CS3_BASE, + .end = DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { /* Second memory resource is AEMIF control registers */ - .start = DA830_EMIF25_CONTROL_BASE, - .end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1, + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, }; -- 2.7.4