scsi: qedf: Do not retry ELS request if qedf_alloc_cmd fails

[ Upstream commit f1c43590365bac054d753d808dbbd207d09e088d ]

If we cannot allocate an ELS middlepath request, simply fail instead of
trying to delay and then reallocate.  This delay logic is causing soft
lockup messages:

NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:1:7639]
Modules linked in: xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter dm_service_time vfat fat rpcrdma sunrpc ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm
irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support qedr(OE) ib_core joydev ipmi_ssif pcspkr hpilo hpwdt sg ipmi_si ipmi_devintf ipmi_msghandler ioatdma shpchp lpc_ich wmi dca acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic qedf(OE) libfcoe mgag200 libfc i2c_algo_bit drm_kms_helper scsi_transport_fc qede(OE) syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qed(OE) drm crct10dif_pclmul e1000e crct10dif_common crc32c_intel scsi_tgt hpsa i2c_core ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 7639 Comm: kworker/2:1 Kdump: loaded Tainted: G           OEL ------------   3.10.0-861.el7.x86_64 #1
Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 07/21/2016
Workqueue: qedf_2_dpc qedf_handle_rrq [qedf]
task: ffff959edd628fd0 ti: ffff959ed6f08000 task.ti: ffff959ed6f08000
RIP: 0010:[<ffffffff8355913a>]  [<ffffffff8355913a>] delay_tsc+0x3a/0x60
RSP: 0018:ffff959ed6f0bd30  EFLAGS: 00000246
RAX: 000000008ef5f791 RBX: 5f646d635f666465 RCX: 0000025b8ededa2f
RDX: 000000000000025b RSI: 0000000000000002 RDI: 0000000000217d1e
RBP: ffff959ed6f0bd30 R08: ffffffffc079aae8 R09: 0000000000000200
R10: ffffffffc07952c6 R11: 0000000000000000 R12: 6c6c615f66646571
R13: ffff959ed6f0bcc8 R14: ffff959ed6f0bd08 R15: ffff959e00000028
FS:  0000000000000000(0000) GS:ffff959eff480000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4117fa1eb0 CR3: 0000002039e66000 CR4: 00000000003607e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
[<ffffffff8355907d>] __const_udelay+0x2d/0x30
[<ffffffffc079444a>] qedf_initiate_els+0x13a/0x450 [qedf]
[<ffffffffc0794210>] ? qedf_srr_compl+0x2a0/0x2a0 [qedf]
[<ffffffffc0795337>] qedf_send_rrq+0x127/0x230 [qedf]
[<ffffffffc078ed55>] qedf_handle_rrq+0x15/0x20 [qedf]
[<ffffffff832b2dff>] process_one_work+0x17f/0x440
[<ffffffff832b3ac6>] worker_thread+0x126/0x3c0
[<ffffffff832b39a0>] ? manage_workers.isra.24+0x2a0/0x2a0
[<ffffffff832bae31>] kthread+0xd1/0xe0
[<ffffffff832bad60>] ? insert_kthread_work+0x40/0x40
[<ffffffff8391f637>] ret_from_fork_nospec_begin+0x21/0x21
[<ffffffff832bad60>] ? insert_kthread_work+0x40/0x40

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bdev: Refresh bdev size for disks without partitioning

commit cba22d86e0a10b7070d2e6a7379dbea51aa0883c upstream.

Currently, block device size in not updated on second and further open
for block devices where partition scan is disabled. This is particularly
annoying for example for DVD drives as that means block device size does
not get updated once the media is inserted into a drive if the device is
already open when inserting the media. This is actually always the case
for example when pktcdvd is in use.

Fix the problem by revalidating block device size on every open even for
devices with partition scan disabled.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bdev: Factor out bdev revalidation into a common helper

commit 731dc4868311ee097757b8746eaa1b4f8b2b4f1c upstream.

Factor out code handling revalidation of bdev on disk change into a
common helper.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix compat handling of FICLONERANGE, FIDEDUPERANGE and FS_IOC_FIEMAP

commit 6b2daec19094a90435abe67d16fb43b1a5527254 upstream.

Unlike FICLONE, all of those take a pointer argument; they do need
compat_ptr() applied to arg.

Fixes: d79bdd52d8be ("vfs: wire up compat ioctl for CLONE/CLONE_RANGE")
Fixes: 54dbc1517237 ("vfs: hoist the btrfs deduplication ioctl to the vfs")
Fixes: ceac204e1da9 ("fs: make fiemap work from compat_ioctl")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: msm_serial: Fix lockup for sysrq and oops

commit 0e4f7f920a5c6bfe5e851e989f27b35a0cc7fb7e upstream.

As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug")
has mentioned the uart driver might cause recursive locking between
normal printing and the kernel debugging facilities (e.g. sysrq and
oops).  In the commit it gave out suggestion for fixing recursive
locking issue: "The solution is to avoid locking in the sysrq case
and trylock in the oops_in_progress case."

This patch follows the suggestion (also used the exactly same code with
other serial drivers, e.g. amba-pl011.c) to fix the recursive locking
issue, this can avoid stuck caused by deadlock and print out log for
sysrq and oops.

Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warning

commit 72c9b5f6f75fbc6c47e0a2d02bc3838a2a47c90a upstream.

usb_otg bus needs to get initialize from the u-boot to be configured
to used as power source to SBC or usb otg port will get configured
as host device. Right now this support is missing in the u-boot and
phy driver so to avoid power failed warning, we would disable this
feature  until proper fix is found.

[    2.716048] phy phy-c0000000.phy.0: USB ID detect failed!
[    2.720186] phy phy-c0000000.phy.0: phy poweron failed --> -22
[    2.726001] ------------[ cut here ]------------
[    2.730583] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8
[    2.738983] Modules linked in:
[    2.742005] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.9-1-ARCH #1
[    2.748643] Hardware name: Hardkernel ODROID-C2 (DT)
[    2.753566] Workqueue: events deferred_probe_work_func
[    2.758649] pstate: 60000005 (nZCv daif -PAN -UAO)
[    2.763394] pc : _regulator_put+0x3c/0xe8
[    2.767361] lr : _regulator_put+0x3c/0xe8
[    2.771326] sp : ffff000011aa3a50
[    2.774604] x29: ffff000011aa3a50 x28: ffff80007ed1b600
[    2.779865] x27: ffff80007f7036a8 x26: ffff80007f7036a8
[    2.785126] x25: 0000000000000000 x24: ffff000011a44458
[    2.790387] x23: ffff000011344218 x22: 0000000000000009
[    2.795649] x21: ffff000011aa3b68 x20: ffff80007ed1b500
[    2.800910] x19: ffff80007ed1b500 x18: 0000000000000010
[    2.806171] x17: 000000005be5943c x16: 00000000f1c73b29
[    2.811432] x15: ffffffffffffffff x14: ffff0000117396c8
[    2.816694] x13: ffff000091aa37a7 x12: ffff000011aa37af
[    2.821955] x11: ffff000011763000 x10: ffff000011aa3730
[    2.827216] x9 : 00000000ffffffd0 x8 : ffff000010871760
[    2.832477] x7 : 00000000000000d0 x6 : ffff0000119d151b
[    2.837739] x5 : 000000000000000f x4 : 0000000000000000
[    2.843000] x3 : 0000000000000000 x2 : 38104b2678c20100
[    2.848261] x1 : 0000000000000000 x0 : 0000000000000024
[    2.853523] Call trace:
[    2.855940]  _regulator_put+0x3c/0xe8
[    2.859562]  regulator_put+0x34/0x48
[    2.863098]  regulator_bulk_free+0x40/0x58
[    2.867153]  devm_regulator_bulk_release+0x24/0x30
[    2.871896]  release_nodes+0x1f0/0x2e0
[    2.875604]  devres_release_all+0x64/0xa4
[    2.879571]  really_probe+0x1c8/0x3e0
[    2.883194]  driver_probe_device+0xe4/0x138
[    2.887334]  __device_attach_driver+0x90/0x110
[    2.891733]  bus_for_each_drv+0x8c/0xd8
[    2.895527]  __device_attach+0xdc/0x160
[    2.899322]  device_initial_probe+0x24/0x30
[    2.903463]  bus_probe_device+0x9c/0xa8
[    2.907258]  deferred_probe_work_func+0xa0/0xf0
[    2.911745]  process_one_work+0x1b4/0x408
[    2.915711]  worker_thread+0x54/0x4b8
[    2.919334]  kthread+0x12c/0x130
[    2.922526]  ret_from_fork+0x10/0x1c
[    2.926060] ---[ end trace 51a68f4c0035d6c0 ]---
[    2.930691] ------------[ cut here ]------------
[    2.935242] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8
[    2.943653] Modules linked in:
[    2.946675] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G        W         5.2.9-1-ARCH #1
[    2.954694] Hardware name: Hardkernel ODROID-C2 (DT)
[    2.959613] Workqueue: events deferred_probe_work_func
[    2.964700] pstate: 60000005 (nZCv daif -PAN -UAO)
[    2.969445] pc : _regulator_put+0x3c/0xe8
[    2.973412] lr : _regulator_put+0x3c/0xe8
[    2.977377] sp : ffff000011aa3a50
[    2.980655] x29: ffff000011aa3a50 x28: ffff80007ed1b600
[    2.985916] x27: ffff80007f7036a8 x26: ffff80007f7036a8
[    2.991177] x25: 0000000000000000 x24: ffff000011a44458
[    2.996439] x23: ffff000011344218 x22: 0000000000000009
[    3.001700] x21: ffff000011aa3b68 x20: ffff80007ed1bd00
[    3.006961] x19: ffff80007ed1bd00 x18: 0000000000000010
[    3.012222] x17: 000000005be5943c x16: 00000000f1c73b29
[    3.017484] x15: ffffffffffffffff x14: ffff0000117396c8
[    3.022745] x13: ffff000091aa37a7 x12: ffff000011aa37af
[    3.028006] x11: ffff000011763000 x10: ffff000011aa3730
[    3.033267] x9 : 00000000ffffffd0 x8 : ffff000010871760
[    3.038528] x7 : 00000000000000fd x6 : ffff0000119d151b
[    3.043790] x5 : 000000000000000f x4 : 0000000000000000
[    3.049051] x3 : 0000000000000000 x2 : 38104b2678c20100
[    3.054312] x1 : 0000000000000000 x0 : 0000000000000024
[    3.059574] Call trace:
[    3.061991]  _regulator_put+0x3c/0xe8
[    3.065613]  regulator_put+0x34/0x48
[    3.069149]  regulator_bulk_free+0x40/0x58
[    3.073203]  devm_regulator_bulk_release+0x24/0x30
[    3.077947]  release_nodes+0x1f0/0x2e0
[    3.081655]  devres_release_all+0x64/0xa4
[    3.085622]  really_probe+0x1c8/0x3e0
[    3.089245]  driver_probe_device+0xe4/0x138
[    3.093385]  __device_attach_driver+0x90/0x110
[    3.097784]  bus_for_each_drv+0x8c/0xd8
[    3.101578]  __device_attach+0xdc/0x160
[    3.105373]  device_initial_probe+0x24/0x30
[    3.109514]  bus_probe_device+0x9c/0xa8
[    3.113309]  deferred_probe_work_func+0xa0/0xf0
[    3.117796]  process_one_work+0x1b4/0x408
[    3.121762]  worker_thread+0x54/0x4b8
[    3.125384]  kthread+0x12c/0x130
[    3.128575]  ret_from_fork+0x10/0x1c
[    3.132110] ---[ end trace 51a68f4c0035d6c1 ]---
[    3.136753] dwc2: probe of c9000000.usb failed with error -22

Fixes: 5a0803bd5ae2 ("ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example

commit 830dbce7c76ea529decac7d23b808c1e7da3d891 upstream.

The documented compatible value for R-Car H3 is
"renesas,r8a7795-rcar-usb2-clock-sel", not
"renesas,r8a77950-rcar-usb2-clock-sel".

Fixes: 311accb64570db45 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191016145650.30003-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usb: fix memory leak in af9005_identify_state

commit 2289adbfa559050d2a38bcd9caac1c18b800e928 upstream.

In af9005_identify_state when returning -EIO the allocated buffer should
be released. Replace the "return -EIO" with assignment into ret and move
deb_info() under a check.

Fixes: af4e067e1dcf ("V4L/DVB (5625): Add support for the AF9005 demodulator from Afatech")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: ab8500: Remove AB8505 USB regulator

commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream.

The USB regulator was removed for AB8500 in
commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator").
It was then added for AB8505 in
commit 547f384f33db ("regulator: ab8500: add support for ab8505").

However, there was never an entry added for it in
ab8505_regulator_match. This causes all regulators after it
to be initialized with the wrong device tree data, eventually
leading to an out-of-bounds array read.

Given that it is not used anywhere in the kernel, it seems
likely that similar arguments against supporting it exist for
AB8505 (it is controlled by hardware).

Therefore, simply remove it like for AB8500 instead of adding
an entry in ab8505_regulator_match.

Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: flexcop-usb: ensure -EIO is returned on error condition

commit 74a96b51a36de4d86660fbc56b05d86668162d6b upstream.

An earlier commit hard coded a return 0 to function flexcop_usb_i2c_req
even though the an -EIO was intended to be returned in the case where
ret != buflen.  Fix this by replacing the return 0 with the return of
ret to return the error return code.

Addresses-Coverity: ("Unused value")

Fixes: b430eaba0be5 ("[media] flexcop-usb: don't use stack for DMA")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix memory leak in hci_connect_le_scan

commit d088337c38a5cd8f0230fbf2d514ff7672f9d0d3 upstream.

In the implementation of hci_connect_le_scan() when conn is added via
hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated
memory for conn is leaked. Use hci_conn_del() to release it.

Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: delete a stray unlock

commit df66499a1fab340c167250a5743931dc50d5f0fa upstream.

We used to take a lock in amp_physical_cfm() but then we moved it to
the caller function.  Unfortunately the unlock on this error path was
overlooked so it leads to a double unlock.

Fixes: a514b17fab51 ("Bluetooth: Refactor locking in amp_physical_cfm")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: fix PM leak in error case of setup

commit 3d44a6fd0775e6215e836423e27f8eedf8c871ea upstream.

If setup() fails a reference for runtime PM has already
been taken. Proper use of the error handling in btusb_open()is needed.
You cannot just return.

Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table

commit e8796c6c69d129420ee94a1906b18d86b84644d4 upstream.

The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: don't check for AG deadlock for realtime files in bunmapi

commit 69ffe5960df16938bccfe1b65382af0b3de51265 upstream.

Commit 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") added
a check in __xfs_bunmapi() to stop early if we would touch multiple AGs
in the wrong order. However, this check isn't applicable for realtime
files. In most cases, it just makes us do unnecessary commits. However,
without the fix from the previous commit ("xfs: fix realtime file data
space leak"), if the last and second-to-last extents also happen to have
different "AG numbers", then the break actually causes __xfs_bunmapi()
to return without making any progress, which sends
xfs_itruncate_extents_flags() into an infinite loop.

Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100

commit a7583e72a5f22470d3e6fd3b6ba912892242339f upstream.

The commit 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel
parameter cover all GPEs") says:
  "Use a bitmap of size 0xFF instead of a u64 for the GPE mask so 256
   GPEs can be masked"

But the masking of GPE 0xFF it not supported and the check condition
"gpe > ACPI_MASKABLE_GPE_MAX" is not valid because the type of gpe is
u8.

So modify the macro ACPI_MASKABLE_GPE_MAX to 0x100, and drop the "gpe >
ACPI_MASKABLE_GPE_MAX" check. In addition, update the docs "Format" for
acpi_mask_gpe parameter.

Fixes: 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
[ rjw: Use u16 as gpe data type in acpi_gpe_apply_masked_gpes() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: i2c-hid: Reset ALPS touchpads on resume

commit fd70466d37bf3fe0118d18c56ddde85b428f86cf upstream.

Commit 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system
resume") fixes many touchpads and touchscreens, however ALPS touchpads
start to trigger IRQ storm after system resume.

Since it's total silence from ALPS, let's bring the old behavior back
to ALPS touchpads.

Fixes: 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system resume")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix up replay_matches_cache()

commit 6e73e92b155c868ff7fce9d108839668caf1d9be upstream.

When running an nfs stress test, I see quite a few cached replies that
don't match up with the actual request.  The first comment in
replay_matches_cache() makes sense, but the code doesn't seem to
match... fix it.

This isn't exactly a bugfix, as the server isn't required to catch every
case of a false retry.  So, we may as well do this, but if this is
fixing a problem then that suggests there's a client bug.

Fixes: 53da6a53e1d4 ("nfsd4: catch some false session retries")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Check NULL governor in available_governors_show

commit d68adc8f85cd757bd33c8d7b2660ad6f16f7f3dc upstream.

The governor is initialized after sysfs attributes become visible so in
theory the governor field can be NULL here.

Fixes: bcf23c79c4e46 ("PM / devfreq: Fix available_governor sysfs")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: include linux/sched/task.h

commit 70082a52f96a45650dfc3d8cdcd2c42bdac9f6f0 upstream.

Without this header file, compile-testing may run into a missing
declaration:

drivers/gpu/drm/msm/msm_gpu.c:444:4: error: implicit declaration of function 'put_task_struct' [-Werror,-Wimplicit-function-declaration]

Fixes: 482f96324a4e ("drm/msm: Fix task dump in gpu recovery")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Avoid potential division by zero in function profiler

commit e31f7939c1c27faa5d0e3f14519eaf7c89e8a69d upstream.

The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.

Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes: e330b3bcd8319 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc590f ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Revert support for execute-only user mappings

commit 24cecc37746393432d994c0dbc251fb9ac7c5d72 upstream.

The ARMv8 64-bit architecture supports execute-only user permissions by
clearing the PTE_USER and PTE_UXN bits, practically making it a mostly
privileged mapping but from which user running at EL0 can still execute.

The downside, however, is that the kernel at EL1 inadvertently reading
such mapping would not trip over the PAN (privileged access never)
protection.

Revert the relevant bits from commit cab15ce604e5 ("arm64: Introduce
execute-only page access permissions") so that PROT_EXEC implies
PROT_READ (and therefore PTE_USER) until the architecture gains proper
support for execute-only user mappings.

Fixes: cab15ce604e5 ("arm64: Introduce execute-only page access permissions")
Cc: <stable@vger.kernel.org> # 4.9.x-
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: panic before exit_mm() on global init exit

commit 43cf75d96409a20ef06b756877a2e72b10a026fc upstream.

Currently, when global init and all threads in its thread-group have exited
we panic via:
do_exit()
-> exit_notify()
   -> forget_original_parent()
      -> find_child_reaper()
This makes it hard to extract a useable coredump for global init from a
kernel crashdump because by the time we panic exit_mm() will have already
released global init's mm.
This patch moves the panic futher up before exit_mm() is called. As was the
case previously, we only panic when global init and all its threads in the
thread-group have exited.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
[christian.brauner@ubuntu.com: fix typo, rewrite commit message]
Link: https://lore.kernel.org/r/1576736993-10121-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-motu: Correct a typo in the clock proc string

commit 0929249e3be3bb82ee6cfec0025f4dde952210b3 upstream.

Just fix a typo of "S/PDIF" in the clock name string.

Fixes: 4638ec6ede08 ("ALSA: firewire-motu: add proc node to show current statuc of clock and packet formats")
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030100921.3826-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: cs4236: fix error return comparison of an unsigned integer

commit d60229d84846a8399257006af9c5444599f64361 upstream.

The return from pnp_irq is an unsigned integer type resource_size_t
and hence the error check for a positive non-error code is always
going to be true.  A check for a non-failure return from pnp_irq
should in fact be for (resource_size_t)-1 rather than >= 0.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: a9824c868a2c ("[ALSA] Add CS4232 PnP BIOS support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191122131354.58042-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock

commit 8c62ed27a12c00e3db1c9f04bc0f272bdbb06734 upstream.

aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a
context protected by an rcu_read_lock. This can not be done as
vfs_getxattr_alloc() may sleep regardles of the gfp_t value being
passed to it.

Fix this by breaking the rcu_read_lock on the policy search when the
xattr match feature is requested and restarting the search if a policy
changes occur.

Fixes: 8e51f9087f40 ("apparmor: Add support for attaching profiles via xattr, presence and value")
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix endianness bug in histogram trigger

commit fe6e096a5bbf73a142f09c72e7aa2835026eb1a3 upstream.

At least on PA-RISC and s390 synthetic histogram triggers are failing
selftests because trace_event_raw_event_synth() always writes a 64 bit
values, but the reader expects a field->size sized value. On little endian
machines this doesn't hurt, but on big endian this makes the reader always
read zero values.

Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have the histogram compare functions convert to u64 first

commit 106f41f5a302cb1f36c7543fae6a05de12e96fa4 upstream.

The compare functions of the histogram code would be specific for the size
of the value being compared (byte, short, int, long long). It would
reference the value from the array via the type of the compare, but the
value was stored in a 64 bit number. This is fine for little endian
machines, but for big endian machines, it would end up comparing zeros or
all ones (depending on the sign) for anything but 64 bit numbers.

To fix this, first derference the value as a u64 then convert it to the type
being compared.

Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map")
Acked-by: Tom Zanussi <zanussi@kernel.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Avoid memory leak in process_system_preds()

commit 79e65c27f09683fbb50c33acab395d0ddf5302d2 upstream.

When failing in the allocation of filter_item, process_system_preds()
goes to fail_mem, where the allocated filter is freed.

However, this leads to memory leak of filter->filter_string and
filter->prog, which is allocated before and in process_preds().
This bug has been detected by kmemleak as well.

Fix this by changing kfree to __free_fiter.

unreferenced object 0xffff8880658007c0 (size 32):
  comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
  hex dump (first 32 bytes):
    63 6f 6d 6d 6f 6e 5f 70 69 64 20 20 3e 20 31 30  common_pid  > 10
    00 00 00 00 00 00 00 00 65 73 00 00 00 00 00 00  ........es......
  backtrace:
    [<0000000067441602>] kstrdup+0x2d/0x60
    [<00000000141cf7b7>] apply_subsystem_event_filter+0x378/0x932
    [<000000009ca32334>] subsystem_filter_write+0x5a/0x90
    [<0000000072da2bee>] vfs_write+0xe1/0x240
    [<000000004f14f473>] ksys_write+0xb4/0x150
    [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
    [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888060c22d00 (size 64):
  comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 e8 d7 41 80 88 ff ff  ...........A....
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000b8c1b109>] process_preds+0x243/0x1820
    [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932
    [<000000009ca32334>] subsystem_filter_write+0x5a/0x90
    [<0000000072da2bee>] vfs_write+0xe1/0x240
    [<000000004f14f473>] ksys_write+0xb4/0x150
    [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
    [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888041d7e800 (size 512):
  comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
  hex dump (first 32 bytes):
    70 bc 85 97 ff ff ff ff 0a 00 00 00 00 00 00 00  p...............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000001e04af34>] process_preds+0x71a/0x1820
    [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932
    [<000000009ca32334>] subsystem_filter_write+0x5a/0x90
    [<0000000072da2bee>] vfs_write+0xe1/0x240
    [<000000004f14f473>] ksys_write+0xb4/0x150
    [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
    [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: http://lkml.kernel.org/r/20191211091258.11310-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404a3add43c9c ("tracing: Only add filter list when needed")
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix lock inversion in trace_event_enable_tgid_record()

commit 3a53acf1d9bea11b57c1f6205e3fe73f9d8a3688 upstream.

       Task T2                             Task T3
trace_options_core_write()            subsystem_open()

 mutex_lock(trace_types_lock)           mutex_lock(event_mutex)

 set_tracer_flag()

   trace_event_enable_tgid_record()       mutex_lock(trace_types_lock)

    mutex_lock(event_mutex)

This gives a circular dependency deadlock between trace_types_lock and
event_mutex. To fix this invert the usage of trace_types_lock and
event_mutex in trace_options_core_write(). This keeps the sequence of
lock usage consistent.

Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com
Cc: stable@vger.kernel.org
Fixes: d914ba37d7145 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30

commit 8df34c56321479bfa1ec732c675b686c2b4df412 upstream.

glibc 2.30 introduces gettid() in public headers, which clashes with
the internal static definition within rseq selftests.

Rename gettid() to rseq_gettid() to eliminate this symbol name clash.

Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: ftrace: correct the condition logic in function graph tracer

commit 1d8f65798240b6577d8c44d20c8ea8f1d429e495 upstream.

The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.

Fixes: e949b6db51dc (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: fix up emulated open drain outputs

commit 256efaea1fdc4e38970489197409a26125ee0aaa upstream.

gpiolib has a corner case with open drain outputs that are emulated.
When such outputs are outputting a logic 1, emulation will set the
hardware to input mode, which will cause gpiod_get_direction() to
report that it is in input mode. This is different from the behaviour
with a true open-drain output.

Unify the semantics here.

Cc: <stable@vger.kernel.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Fix retrieving of active qcs

commit 8385d756e114f2df8568e508902d5f9850817ffb upstream.

ata_qc_complete_multiple() is called with a mask of the still active
tags.

mv_sata doesn't have this information directly and instead calculates
the still active tags from the started tags (ap->qc_active) and the
finished tags as (ap->qc_active ^ done_mask)

Since 28361c40368 the hw_tag and tag are no longer the same and the
equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is
initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is
started and this will be in done_mask on completion. ap->qc_active ^
done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as
the internal tag will never be reported as completed.

This is fixed by introducing ata_qc_get_active() which returns the
active hardware tags and calling it where appropriate.

This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same
problem. There is another case in sata_nv that most likely needs fixing
as well, but this looks a little different, so I wasn't confident enough
to change that.

Fixes: 28361c403683 ("libata: add extra internal command")
Cc: stable@vger.kernel.org
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing export of ata_qc_get_active(), as per Pali.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE

commit 1a3d78cb6e20779a19388315bd8efefbd8d4a656 upstream.

Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making
it conforming to the 'strict' AHCI implementation which this controller
is based on.

This solves long link establishment with specific hard drives (e.g.:
Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the
error recovery handling before finally establishing a succesful SATA
link at the desired speed.

We re-order the hpriv->flags assignment to also remove the NONCQ quirk
since we can set the flag directly.

Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms")
Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Add missing clock management during recovery

commit bf0e5013bc2dcac205417e1252205dca39dfc005 upstream.

The downstream implementation of ahci_brcm.c did contain clock
management recovery, but until recently, did that outside of the
libahci_platform helpers and this was unintentionally stripped out while
forward porting the patch upstream.

Add the missing clock management during recovery and sleep for 10
milliseconds per the design team recommendations to ensure the SATA PHY
controller and AFE have been fully quiesced.

Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Allow optional reset controller to be used

commit 2b2c47d9e1fe90311b725125d6252a859ee87a79 upstream.

On BCM63138, we need to reset the AHCI core prior to start utilizing it,
grab the reset controller device cookie and do that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Fix AHCI resources management

commit c0cdf2ac4b5bf3e5ef2451ea29fb4104278cdabc upstream.

The AHCI resources management within ahci_brcm.c is a little
convoluted, largely because it historically had a dedicated clock that
was managed within this file in the downstream tree. Once brough
upstream though, the clock was left to be managed by libahci_platform.c
which is entirely appropriate.

This patch series ensures that the AHCI resources are fetched and
enabled before any register access is done, thus avoiding bus errors on
platforms which clock gate the controller by default.

As a result we need to re-arrange the suspend() and resume() functions
in order to avoid accessing registers after the clocks have been turned
off respectively before the clocks have been turned on. Finally, we can
refactor brcm_ahci_get_portmask() in order to fetch the number of ports
from hpriv->mmio which is now accessible without jumping through hoops
like we used to do.

The commit pointed in the Fixes tag is both old and new enough not to
require major headaches for backporting of this patch.

Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()

commit 84b032dbfdf1c139cd2b864e43959510646975f8 upstream.

This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5
("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are
going to need ahci_platform_{enable,disable}_phys() in a subsequent
commit for ahci_brcm.c in order to properly control the PHY
initialization order.

Also make sure the function prototypes are declared in
include/linux/ahci_platform.h as a result.

Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE

commit 673bdf8ce0a387ef585c13b69a2676096c6edfe9 upstream.

These were added to blkdev_ioctl() but not blkdev_compat_ioctl,
so add them now.

Cc: <stable@vger.kernel.org> # v4.10+
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compat_ioctl: block: handle Persistent Reservations

commit b2c0fcd28772f99236d261509bcd242135677965 upstream.

These were added to blkdev_ioctl() in linux-5.5 but not
blkdev_compat_ioctl, so add them now.

Cc: <stable@vger.kernel.org> # v4.4+
Fixes: bbd3e064362e ("block: add an API for Persistent Reservations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fold in followup patch from Arnd with missing pr.h header include.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

dmaengine: Fix access to uninitialized dma_slave_caps

commit 53a256a9b925b47c7e67fc1f16ca41561a7b877c upstream.

dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the
stack, populates it using dma_get_slave_caps() and then accesses one
of its members.

However dma_get_slave_caps() may fail and this isn't accounted for,
leading to a legitimate warning of gcc-4.9 (but not newer versions):

   In file included from drivers/spi/spi-bcm2835.c:19:0:
   drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse':
>> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized]
     if (caps.descriptor_reuse) {

Fix it, thereby also silencing the gcc-4.9 warning.

The issue has been present for 4 years but surfaces only now that
the first caller of dmaengine_desc_set_reuse() has been added in
spi-bcm2835.c. Another user of reusable DMA descriptors has existed
for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag
directly instead of calling dmaengine_desc_set_reuse(). Nevertheless,
tag this commit for stable in case there are out-of-tree users.

Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.3+
Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locks: print unsigned ino in /proc/locks

commit 98ca480a8f22fdbd768e3dad07024c8d4856576c upstream.

An ino is unsigned, so display it as such in /proc/locks.

Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore/ram: Write new dumps to start of recycled zones

commit 9e5f1c19800b808a37fb9815a26d382132c26c3d upstream.

The ram_core.c routines treat przs as circular buffers. When writing a
new crash dump, the old buffer needs to be cleared so that the new dump
doesn't end up in the wrong place (i.e. at the end).

The solution to this problem is to reset the circular buffer state before
writing a new Oops dump.

Signed-off-by: Aleksandr Yashkin <a.yashkin@inango-systems.com>
Signed-off-by: Nikolay Merinov <n.merinov@inango-systems.com>
Signed-off-by: Ariel Gilman <a.gilman@inango-systems.com>
Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com
Fixes: 896fc1f0c4c6 ("pstore/ram: Switch to persistent_ram routines")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: move_pages: return valid node id in status if the page is already on the target node

commit e0153fc2c7606f101392b682e720a7a456d6c766 upstream.

Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:

  int main(void)
  {
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;

unsigned long nodemask =  1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);

void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}

ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);

int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}

ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
  }

Then running the program would return nonsense status values:

  $ ./move_pages_bug
  move_pages: 0
  status[0] = 208
  status[1] = 208
  status[2] = 208
  status[3] = 208
  status[4] = 208
  status[5] = 208
  status[6] = 208
  status[7] = 208

This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds.  The valid status may be errno or node id.

We can't simply initialize status array to zero since the pages may be
not on node 0.  Fix it by updating status with node id which the page is
already on.

Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: account security cred as well to kmemcg

commit 84029fd04c201a4c7e0b07ba262664900f47c6f5 upstream.

The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not.  Account cred->security to kmemcg.

Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes.  Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period.  This
overhead can adversely impact the isolation on the system.

One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.

Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/zsmalloc.c: fix the migrated zspage statistics.

commit ac8f05da5174c560de122c499ce5dfb5d0dfbee5 upstream.

When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.

Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes: 91537fee0013 ("mm: add NR_ZSMALLOC to vmstat")
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jinsuk Choi <jjinsuk.choi@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec: check 'transmit_in_progress', not 'transmitting'

commit ac479b51f3f4aaa852b5d3f00ecfb9290230cf64 upstream.

Currently wait_event_interruptible_timeout is called in cec_thread_func()
when adap->transmitting is set. But if the adapter is unconfigured
while transmitting, then adap->transmitting is set to NULL. But the
hardware is still actually transmitting the message, and that's
indicated by adap->transmit_in_progress and we should wait until that
is finished or times out before transmitting new messages.

As the original commit says: adap->transmitting is the userspace view,
adap->transmit_in_progress reflects the hardware state.

However, if adap->transmitting is NULL and adap->transmit_in_progress
is true, then wait_event_interruptible is called (no timeout), which
can get stuck indefinitely if the CEC driver is flaky and never marks
the transmit-in-progress as 'done'.

So test against transmit_in_progress when deciding whether to use
the timeout variant or not, instead of testing against adap->transmitting.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 32804fcb612b ("media: cec: keep track of outstanding transmits")
Cc: <stable@vger.kernel.org> # for v4.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec: avoid decrementing transmit_queue_sz if it is 0

commit 95c29d46ab2a517e4c26d0a07300edca6768db17 upstream.

WARN if transmit_queue_sz is 0 but do not decrement it.
The CEC adapter will become unresponsive if it goes below
0 since then it thinks there are 4 billion messages in the
queue.

Obviously this should not happen, but a driver bug could
cause this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.12 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec: CEC 2.0-only bcast messages were ignored

commit cec935ce69fc386f13959578deb40963ebbb85c3 upstream.

Some messages are allowed to be a broadcast message in CEC 2.0
only, and should be ignored by CEC 1.4 devices.

Unfortunately, the check was wrong, causing such messages to be
marked as invalid under CEC 2.0.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: pulse8-cec: fix lost cec_transmit_attempt_done() call

commit e5a52a1d15c79bb48a430fb263852263ec1d3f11 upstream.

The periodic PING command could interfere with the result of
a CEC transmit, causing a lost cec_transmit_attempt_done()
call.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Avoid VDSO ABI breakage due to global register variable

commit bbcc5672b0063b0e9d65dc8787a4f09c3b5bb5cc upstream.

Declaring __current_thread_info as a global register variable has the
effect of preventing GCC from saving & restoring its value in cases
where the ABI would typically do so.

To quote GCC documentation:

> If the register is a call-saved register, call ABI is affected: the
> register will not be restored in function epilogue sequences after the
> variable has been assigned. Therefore, functions cannot safely return
> to callers that assume standard ABI.

When our position independent VDSO is built for the n32 or n64 ABIs all
functions it exposes should be preserving the value of $gp/$28 for their
caller, but in the presence of the __current_thread_info global register
variable GCC stops doing so & simply clobbers $gp/$28 when calculating
the address of the GOT.

In cases where the VDSO returns success this problem will typically be
masked by the caller in libc returning & restoring $gp/$28 itself, but
that is by no means guaranteed. In cases where the VDSO returns an error
libc will typically contain a fallback path which will now fail
(typically with a bad memory access) if it attempts anything which
relies upon the value of $gp/$28 - eg. accessing anything via the GOT.

One fix for this would be to move the declaration of
__current_thread_info inside the current_thread_info() function,
demoting it from global register variable to local register variable &
avoiding inadvertently creating a non-standard calling ABI for the VDSO.
Unfortunately this causes issues for clang, which doesn't support local
register variables as pointed out by commit fe92da0f355e ("MIPS: Changed
current_thread_info() to an equivalent supported by both clang and GCC")
which introduced the global register variable before we had a VDSO to
worry about.

Instead, fix this by continuing to use the global register variable for
the kernel proper but declare __current_thread_info as a simple extern
variable when building the VDSO. It should never be referenced, and will
cause a link error if it is. This resolves the calling convention issue
for the VDSO without having any impact upon the build of the kernel
itself for either clang or gcc.

Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: hdmi: Remove duplicate cleanup calls

commit 57177d214ee0816c4436c23d6c933ccb32c571f1 upstream.

When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup()
are called. This also happens when the connector and the encoder are
destroyed. This double call triggers a NULL pointer exception.

The patch fixes this by removing the cleanup calls in the unbind
function.

Cc: <stable@vger.kernel.org>
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add headset Mic no shutup for ALC283

commit 66c5d718e5a6f80153b5e8d6ad8ba8e9c3320839 upstream.

Chrome machine had humming noise from external speaker plugin at
codec D3 state.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/2692449396954c6c968f5b75e2660358@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: set the interface format after resume on Dell WD19

commit 92adc96f8eecd9522a907c197cc3d62e405539fe upstream.

Recently we found the headset-mic on the Dell Dock WD19 doesn't work
anymore after s3 (s2i or deep), this problem could be workarounded by
closing (pcm_close) the app and then reopening (pcm_open) the app, so
this bug is not easy to be detected by users.

When problem happens, retire_capture_urb() could still be called
periodically, but the size of captured data is always 0, it could be
a firmware bug on the dock. Anyway I found after resuming, the
snd_usb_pcm_prepare() will be called, and if we forcibly run
set_format() to set the interface and its endpoint, the capture
size will be normal again. This problem and workaound also apply to
playback.

To fix it in the kernel, add a quirk to let set_format() run
forcibly once after resume.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191218132650.6303-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: fix set_format altsetting sanity check

commit 0141254b0a74b37aa7eb13d42a56adba84d51c73 upstream.

Make sure to check the return value of usb_altnum_to_altsetting() to
avoid dereferencing a NULL pointer when the requested alternate settings
is missing.

The format altsetting number may come from a quirk table and there does
not seem to be any other validation of it (the corresponding index is
checked however).

Fixes: b099b9693d23 ("ALSA: usb-audio: Avoid superfluous usb_set_interface() calls")
Cc: stable <stable@vger.kernel.org> # 4.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191220093134.1248-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code

commit 0aec96f5897ac16ad9945f531b4bef9a2edd2ebd upstream.

Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724
driver with Infrasonic Quartet support code: namely, ice->set_rate
callback gets called inside ice->reg_lock spinlock, while the callback
in quartet.c holds ice->gpio_mutex.

This patch fixes the invalid call: it simply moves the calls of
ice->set_rate and ice->set_mclk callbacks outside the spinlock.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com
Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_tproxy: Fix port selector on Big Endian

[ Upstream commit 8cb4ec44de42b99b92399b4d1daf3dc430ed0186 ]

On Big Endian architectures, u16 port value was extracted from the wrong
parts of u32 sreg_port, just like commit 10596608c4d62 ("netfilter:
nf_tables: fix mismatch in big-endian system") describes.

Fixes: 4ed8eb6570a49 ("netfilter: nf_tables: Add native tproxy support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: limit to INT_MAX in create_blob ioctl

[ Upstream commit 5bf8bec3f4ce044a223c40cbce92590d938f0e9c ]

The hardened usercpy code is too paranoid ever since commit 6a30afa8c1fb
("uaccess: disallow > INT_MAX copy sizes")

Code itself should have been fine as-is.

Link: http://lkml.kernel.org/r/20191106164755.31478-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reported-by: syzbot+fb77e97ebf0612ee6914@syzkaller.appspotmail.com
Fixes: 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes")
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

taskstats: fix data-race

[ Upstream commit 0b8d616fb5a8ffa307b1d3af37f55c15dae14f28 ]

When assiging and testing taskstats in taskstats_exit() there's a race
when setting up and reading sig->stats when a thread-group with more
than one thread exits:

write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0:
 taskstats_tgid_alloc kernel/taskstats.c:567 [inline]
 taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596
 do_exit+0x2c2/0x18e0 kernel/exit.c:864
 do_group_exit+0xb4/0x1c0 kernel/exit.c:983
 get_signal+0x2a2/0x1320 kernel/signal.c:2734
 do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815
 exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159
 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
 do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1:
 taskstats_tgid_alloc kernel/taskstats.c:559 [inline]
 taskstats_exit+0xb2/0x717 kernel/taskstats.c:596
 do_exit+0x2c2/0x18e0 kernel/exit.c:864
 do_group_exit+0xb4/0x1c0 kernel/exit.c:983
 __do_sys_exit_group kernel/exit.c:994 [inline]
 __se_sys_exit_group kernel/exit.c:992 [inline]
 __x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992
 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by using smp_load_acquire() and smp_store_release().

Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com
Fixes: 34ec12349c8a ("taskstats: cleanup ->signal->stats allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Will Deacon <will@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20191009114809.8643-1-christian.brauner@ubuntu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix mount failure crash on invalid iclog memory access

[ Upstream commit 798a9cada4694ca8d970259f216cec47e675bfd5 ]

syzbot (via KASAN) reports a use-after-free in the error path of
xlog_alloc_log(). Specifically, the iclog freeing loop doesn't
handle the case of a fully initialized ->l_iclog linked list.
Instead, it assumes that the list is partially constructed and NULL
terminated.

This bug manifested because there was no possible error scenario
after iclog list setup when the original code was added.  Subsequent
code and associated error conditions were added some time later,
while the original error handling code was never updated. Fix up the
error loop to terminate either on a NULL iclog or reaching the end
of the list.

Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen

[ Upstream commit d2cd795c4ece1a24fda170c35eeb4f17d9826cbb ]

The auto-parser assigns the bass speaker to DAC3 (NID 0x06) which
is without the volume control. I do not see a reason to use DAC2,
because the shared output to all speakers produces the sufficient
and well balanced sound. The stereo support is enough for this
purpose (laptop).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191129144027.14765-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC

[ Upstream commit 48e01504cf5315cbe6de9b7412e792bfcc3dd9e1 ]

ASUS reported that there's an bass speaker in addition to internal
speaker and it uses DAC 0x02. It was not enabled in the commit
436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS
UX431FLC") which only enables the amplifier and the front speaker.
This commit enables the bass speaker on top of the aforementioned
work to improve the acoustic experience.

Fixes: 436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191230031118.95076-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker

[ Upstream commit e79c22695abd3b75a6aecf4ea4b9607e8d82c49c ]

Dell has new platform which has dual speaker connecting.
They want dual speaker which use same dac for output.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/229c7efa2b474a16b7d8a916cd096b68@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / hibernate: memory_bm_find_bit(): Tighten node optimisation

[ Upstream commit da6043fe85eb5ec621e34a92540735dcebbea134 ]

When looking for a bit by number we make use of the cached result from the
preceding lookup to speed up operation.  Firstly we check if the requested
pfn is within the cached zone and if not lookup the new zone.  We then
check if the offset for that pfn falls within the existing cached node.
This happens regardless of whether the node is within the zone we are
now scanning.  With certain memory layouts it is possible for this to
false trigger creating a temporary alias for the pfn to a different bit.
This leads the hibernation code to free memory which it was never allocated
with the expected fallout.

Ensure the zone we are scanning matches the cached zone before considering
the cached node.

Deep thanks go to Andrea for many, many, many hours of hacking and testing
that went into cornering this bug.

Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/balloon: fix ballooned page accounting without hotplug enabled

[ Upstream commit c673ec61ade89bf2f417960f986bc25671762efb ]

When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined
reserve_additional_memory() will set balloon_stats.target_pages to a
wrong value in case there are still some ballooned pages allocated via
alloc_xenballooned_pages().

This will result in balloon_process() no longer be triggered when
ballooned pages are freed in batches.

Reported-by: Nicholas Tsirakis <niko.tsirakis@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen-blkback: prevent premature module unload

[ Upstream commit fa2ac657f9783f0891b2935490afe9a7fd29d3fa ]

Objects allocated by xen_blkif_alloc come from the 'blkif_cache' kmem
cache. This cache is destoyed when xen-blkif is unloaded so it is
necessary to wait for the deferred free routine used for such objects to
complete. This necessity was missed in commit 14855954f636 "xen-blkback:
allow module to be cleanly unloaded". This patch fixes the problem by
taking/releasing extra module references in xen_blkif_alloc/free()
respectively.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix steering rule of drop and count

[ Upstream commit ed9085fed9d95d5921582e3c8474f3736c5d2782 ]

There are two flow rule destinations: QP and packet. While users are
setting DROP packet rule, the QP should not be set as a destination.

Fixes: 3b3233fbf02e ("IB/mlx5: Add flow counters binding support")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx4: Follow mirror sequence of device add during device removal

[ Upstream commit 89f988d93c62384758b19323c886db917a80c371 ]

Current code device add sequence is:

ib_register_device()
ib_mad_init()
init_sriov_init()
register_netdev_notifier()

Therefore, the remove sequence should be,

unregister_netdev_notifier()
close_sriov()
mad_cleanup()
ib_unregister_device()

However it is not above.
Hence, make do above remove sequence.

Fixes: fa417f7b520ee ("IB/mlx4: Add support for IBoE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Avoid SBD overflow condition in irq handler

[ Upstream commit 0539ad0b22877225095d8adef0c376f52cc23834 ]

The s390 CPU Measurement sampling facility has an overflow condition
which fires when all entries in a SBD are used.
The measurement alert interrupt is triggered and reads out all samples
in this SDB. It then tests the successor SDB, if this SBD is not full,
the interrupt handler does not read any samples at all from this SDB
The design waits for the hardware to fill this SBD and then trigger
another meassurement alert interrupt.

This scheme works nicely until
an perf_event_overflow() function call discards the sample due to
a too high sampling rate.
The interrupt handler has logic to read out a partially filled SDB
when the perf event overflow condition in linux common code is met.
This causes the CPUM sampling measurement hardware and the PMU
device driver to operate on the same SBD's trailer entry.
This should not happen.

This can be seen here using this trace:
   cpumsf_pmu_add: tear:0xb5286000
   hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0
   hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
        above shows 1. interrupt
   hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0
   hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
        above shows 2. interrupt
... this goes on fine until...
   hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0
   perf_push_sample1: overflow
      one or more samples read from the IRQ handler are rejected by
      perf_event_overflow() and the IRQ handler advances to the next SDB
      and modifies the trailer entry of a partially filled SDB.
   hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1
      timestamp: 14:32:52.519953

Next time the IRQ handler is called for this SDB the trailer entry shows
an overflow count of 19 missed entries.
   hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1
      timestamp: 14:32:52.970058

Remove access to a follow on SDB when event overflow happened.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits

[ Upstream commit 39d4a501a9ef55c57b51e3ef07fc2aeed7f30b3b ]

Function perf_event_ever_overflow() and perf_event_account_interrupt()
are called every time samples are processed by the interrupt handler.
However function perf_event_account_interrupt() has checks to avoid being
flooded with interrupts (more then 1000 samples are received per
task_tick).  Samples are then dropped and a PERF_RECORD_THROTTLED is
added to the perf data. The perf subsystem limit calculation is:

    maximum sample frequency := 100000 --> 1 samples per 10 us
    task_tick = 10ms = 10000us --> 1000 samples per task_tick

The work flow is

measurement_alert() uses SDBT head and each SBDT points to 511
 SDB pages, each with 126 sample entries. After processing 8 SBDs
 and for each valid sample calling:

     perf_event_overflow()
       perf_event_account_interrupts()

there is a considerable amount of samples being dropped, especially when
the sample frequency is very high and near the 100000 limit.

To avoid the high amount of samples being dropped near the end of a
task_tick time frame, increment the sampling interval in case of
dropped events. The CPU Measurement sampling facility on the s390
supports only intervals, specifiing how many CPU cycles have to be
executed before a sample is generated. Increase the interval when the
samples being generated hit the task_tick limit.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: raid1: check rdev before reference in raid1_sync_request func

[ Upstream commit 028288df635f5a9addd48ac4677b720192747944 ]

In raid1_sync_request func, rdev should be checked before reference.

Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP

[ Upstream commit 1da4bd9f9d187f53618890d7b66b9628bbec3c70 ]

Fix the lookup method on the dynamic root directory such that creation
calls, such as mkdir, open(O_CREAT), symlink, etc. fail with EOPNOTSUPP
rather than failing with some odd error (such as EEXIST).

lookup() itself tries to create automount directories when it is invoked.
These are cached locally in RAM and not committed to storage.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: make socket read/write_iter() honor IOCB_NOWAIT

[ Upstream commit ebfcd8955c0b52eb793bcbc9e71140e3d0cdb228 ]

The socket read/write helpers only look at the file O_NONBLOCK. not
the iocb IOCB_NOWAIT flag. This breaks users like preadv2/pwritev2
and io_uring that rely on not having the file itself marked nonblocking,
but rather the iocb itself.

Cc: netdev@vger.kernel.org
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: fix wrong endpoint desc

[ Upstream commit e5b5da96da50ef30abb39cb9f694e99366404d24 ]

Gadget driver should always use config_ep_by_speed() to initialize
usb_ep struct according to usb device's operating speed. Otherwise,
usb_ep struct may be wrong if usb devcie's operating speed is changed.

The key point in this patch is that we want to make sure the desc pointer
in usb_ep struct will be set to NULL when gadget is disconnected.
This will force it to call config_ep_by_speed() to correctly initialize
usb_ep struct based on the new operating speed when gadget is
re-connected later.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit

[ Upstream commit 37a68eab4cd92b507c9e8afd760fdc18e4fecac6 ]

Place the declaration of struct nouveau_conn_atom above that of
struct nouveau_connector. This commit makes no changes to the moved
block what so ever, it just moves it up a bit.

This is a preparation patch to fix some issues with connector handling
on pre nv50 displays (which do not use atomic modesetting).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: stop discovering if oob mode is disconnected

[ Upstream commit f70267f379b5e5e11bdc5d72a56bf17e5feed01f ]

The discovering of sas port is driven by workqueue in libsas. When libsas
is processing port events or phy events in workqueue, new events may rise
up and change the state of some structures such as asd_sas_phy.  This may
cause some problems such as follows:

==>thread 1                       ==>thread 2

                                  ==>phy up
                                  ==>phy_up_v3_hw()
                                    ==>oob_mode = SATA_OOB_MODE;
                                  ==>phy down quickly
                                  ==>hisi_sas_phy_down()
                                    ==>sas_ha->notify_phy_event()
                                    ==>sas_phy_disconnected()
                                      ==>oob_mode = OOB_NOT_CONNECTED
==>workqueue wakeup
==>sas_form_port()
  ==>sas_discover_domain()
    ==>sas_get_port_device()
      ==>oob_mode is OOB_NOT_CONNECTED and device
         is wrongly taken as expander

This at last lead to the panic when libsas trying to issue a command to
discover the device.

[183047.614035] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000058
[183047.622896] Mem abort info:
[183047.625762]   ESR = 0x96000004
[183047.628893]   Exception class = DABT (current EL), IL = 32 bits
[183047.634888]   SET = 0, FnV = 0
[183047.638015]   EA = 0, S1PTW = 0
[183047.641232] Data abort info:
[183047.644189]   ISV = 0, ISS = 0x00000004
[183047.648100]   CM = 0, WnR = 0
[183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000b7df67be
[183047.657834] [0000000000000058] pgd=0000000000000000
[183047.662789] Internal error: Oops: 96000004 [#1] SMP
[183047.667740] Process kworker/u16:2 (pid: 31291, stack limit =
0x00000000417c4974)
[183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G
W  OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1
[183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10,
BIOS 0.15 10/22/2019
[183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO)
[183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw]
[183047.717153] sp : ffff00000f28ba60
[183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228
[183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200
[183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0
[183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228
[183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200
[183047.747464] x19: 0000000000f80800 x18: 0000000000000010
[183047.752848] x17: 0000000000000000 x16: 0000000000000000
[183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005
[183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20
[183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870
[183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0
[183047.779770] x7 : 0000000000000000 x6 : 000000000000003f
[183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0
[183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007
[183047.795922] x1 : 0000000000000008 x0 : 0000000000000000
[183047.801307] Call trace:
[183047.803827]  prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.809127]  hisi_sas_task_prep+0x750/0x888 [hisi_sas_main]
[183047.814773]  hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main]
[183047.820939]  hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
[183047.826757]  smp_execute_task_sg+0xec/0x218
[183047.831013]  smp_execute_task+0x74/0xa0
[183047.834921]  sas_discover_expander.part.7+0x9c/0x5f8
[183047.839959]  sas_discover_root_expander+0x90/0x160
[183047.844822]  sas_discover_domain+0x1b8/0x1e8
[183047.849164]  process_one_work+0x1b4/0x3f8
[183047.853246]  worker_thread+0x54/0x470
[183047.856981]  kthread+0x134/0x138
[183047.860283]  ret_from_fork+0x10/0x18
[183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800)
[183047.870097] kernel fault(0x1) notification starting on CPU 0
[183047.875828] kernel fault(0x1) notification finished on CPU 0
[183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE)
hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE)
[183047.892418] ---[ end trace 4cc26083fc11b783  ]---
[183047.897107] Kernel panic - not syncing: Fatal exception
[183047.902403] kernel fault(0x5) notification starting on CPU 0
[183047.908134] kernel fault(0x5) notification finished on CPU 0
[183047.913865] SMP: stopping secondary CPUs
[183047.917861] Kernel Offset: disabled
[183047.921422] CPU features: 0x2,a2a00a38
[183047.925243] Memory Limit: none
[183047.928372] kernel reboot(0x2) notification starting on CPU 0
[183047.934190] kernel reboot(0x2) notification finished on CPU 0
[183047.940008] ---[ end Kernel panic - not syncing: Fatal exception
]---

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.com
Reported-by: Gao Chuan <gaochuan4@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: qla4xxx: fix double free in probe

[ Upstream commit fee92f25777789d73e1936b91472e9c4644457c8 ]

On this error path we call qla4xxx_mem_free() and then the caller also
calls qla4xxx_free_adapter() which calls qla4xxx_mem_free().  It leads to a
couple double frees:

drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed
drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed

Fixes: afaf5a2d341d ("[SCSI] Initial Commit of qla4xxx")
Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI

[ Upstream commit af22f0c7b052c5c203207f1e5ebd6aa65f87c538 ]

PORT UPDATE asynchronous event is generated on the host that issues PLOGI
ELS (in the case of higher WWPN). In that case, the event shouldn't be
handled as it sets unwanted DPC flags (i.e. LOOP_RESYNC_NEEDED) that
trigger link flap.

Ignore the event if the host has higher WWPN, but handle otherwise.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-13-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Send Notify ACK after N2N PLOGI

[ Upstream commit 5e6b01d84b9d20bcd77fc7c4733a2a4149bf220a ]

qlt_handle_login schedules session for deletion even if a login is in
progress. That causes login bouncing, i.e. a few logins are made before it
settles down.

Complete the first login by sending Notify Acknowledge IOCB via
qlt_plogi_ack_unref if the session is pending login completion.

Fixes: 9cd883f07a54 ("scsi: qla2xxx: Fix session cleanup for N2N")
Cc: Krishna Kant <krishna.kant@purestorage.com>
Cc: Alexei Potashnik <alexei@purestorage.com>
Link: https://lore.kernel.org/r/20191125165702.1013-11-r.bolshakov@yadro.com
Acked-by: Quinn Tran <qutran@marvell.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Configure local loop for N2N target

[ Upstream commit fd1de5830a5abaf444cc4312871e02c41e24fdc1 ]

qla2x00_configure_local_loop initializes PLOGI payload for PLOGI ELS using
Get Parameters mailbox command.

In the case when the driver is running in target mode, the topology is N2N
and the target port has higher WWPN, LOCAL_LOOP_UPDATE bit is cleared too
early and PLOGI payload is not initialized by the Get Parameters
command. That causes a failure of ELS IOCB carrying the PLOGI with 0x15 aka
Data Underrun error.

LOCAL_LOOP_UPDATE has to be set to initialize PLOGI payload.

Fixes: 48acad099074 ("scsi: qla2xxx: Fix N2N link re-connect")
Link: https://lore.kernel.org/r/20191125165702.1013-10-r.bolshakov@yadro.com
Acked-by: Quinn Tran <qutran@marvell.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length

[ Upstream commit 0334cdea1fba36fad8bdf9516f267ce01de625f7 ]

The size of the buffer is hardcoded as 0x70 or 112 bytes, while the size of
ELS IOCB is 0x40 and the size of PLOGI payload returned by Get Parameters
command is 0x74.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-9-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Don't call qlt_async_event twice

[ Upstream commit 2c2f4bed9b6299e6430a65a29b5d27b8763fdf25 ]

MBA_PORT_UPDATE generates duplicate log lines in target mode because
qlt_async_event is called twice. Drop the calls within the case as the
function will be called right after the switch statement.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Drop superfluous INIT_WORK of del_work

[ Upstream commit 600954e6f2df695434887dfc6a99a098859990cf ]

del_work is already initialized inside qla2x00_alloc_fcport, there's no
need to overwrite it. Indeed, it might prevent complete traversal of
workqueue list.

Fixes: a01c77d2cbc45 ("scsi: qla2xxx: Move session delete to driver work queue")
Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-5-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func

[ Upstream commit 9a1b0b9a6dab452fb0e39fe96880c4faf3878369 ]

When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf,
dd_data should be freed before return SLI_CONFIG_HANDLED.

When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in
job_error tag.

Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.com
Signed-off-by: Bo Wu <wubo40@huawei.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxe: correctly calculate iCRC for unaligned payloads

[ Upstream commit 2030abddec6884aaf5892f5724c48fc340e6826f ]

If RoCE PDUs being sent or received contain pad bytes, then the iCRC
is miscalculated, resulting in PDUs being emitted by RXE with an incorrect
iCRC, as well as ingress PDUs being dropped due to erroneously detecting
a bad iCRC in the PDU.  The fix is to include the pad bytes, if any,
in iCRC computations.

Note: This bug has caused broken on-the-wire compatibility with actual
hardware RoCE devices since the soft-RoCE driver was first put into the
mainstream kernel.  Fixing it will create an incompatibility with the
original soft-RoCE devices, but is necessary to be compatible with real
hardware devices.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Steve Wise <larrystevenwise@gmail.com>
Link: https://lore.kernel.org/r/20191203020319.15036-2-larrystevenwise@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: add missed unregister_pernet_subsys in init failure

[ Upstream commit 44a7b6759000ac51b92715579a7bba9e3f9245c2 ]

The driver forgets to call unregister_pernet_subsys() in the error path
of cma_init().
Add the missed call to fix it.

Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix SELinux setting security label on /afs

[ Upstream commit bcbccaf2edcf1b76f73f890e968babef446151a4 ]

Make the AFS dynamic root superblock R/W so that SELinux can set the
security label on it.  Without this, upgrades to, say, the Fedora
filesystem-afs RPM fail if afs is mounted on it because the SELinux label
can't be (re-)applied.

It might be better to make it possible to bypass the R/O check for LSM
label application through setxattr.

Fixes: 4d673da14533 ("afs: Support the AFS dynamic root")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: selinux@vger.kernel.org
cc: linux-security-module@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix afs_find_server lookups for ipv4 peers

[ Upstream commit 9bd0160d12370a076e44f8d1320cde9c83f2c647 ]

afs_find_server tries to find a server that has an address that
matches the transport address of an rxrpc peer.  The code assumes
that the transport address is always ipv6, with ipv4 represented
as ipv4 mapped addresses, but that's not the case.  If the transport
family is AF_INET, srx->transport.sin6.sin6_addr.s6_addr32[] will
be beyond the actual ipv4 address and will always be 0, and all
ipv4 addresses will be seen as matching.

As a result, the first ipv4 address seen on any server will be
considered a match, and the server returned may be the wrong one.

One of the consequences is that callbacks received over ipv4 will
only be correctly applied for the server that happens to have the
first ipv4 address on the fs_addresses4 list.  Callbacks over ipv4
from all other servers are dropped, causing the client to serve stale
data.

This is fixed by looking at the transport family, and comparing ipv4
addresses based on a sockaddr_in structure rather than a sockaddr_in6.

Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Don't fail devfreq_dev_release if not in list

[ Upstream commit 42a6b25e67df6ee6675e8d1eaf18065bd73328ba ]

Right now devfreq_dev_release will print a warning and abort the rest of
the cleanup if the devfreq instance is not part of the global
devfreq_list. But this is a valid scenario, for example it can happen if
the governor can't be found or on any other init error that happens
after device_register.

Initialize devfreq->node to an empty list head in devfreq_add_device so
that list_del becomes a safe noop inside devfreq_dev_release and we can
continue the rest of the cleanup.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Set scaling_max_freq to max on OPP notifier error

[ Upstream commit e7cc792d00049c874010b398a27c3cc7bc8fef34 ]

The devfreq_notifier_call functions will update scaling_min_freq and
scaling_max_freq when the OPP table is updated.

If fetching the maximum frequency fails then scaling_max_freq remains
set to zero which is confusing. Set to ULONG_MAX instead so we don't
need special handling for this case in other places.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Fix devfreq_notifier_call returning errno

[ Upstream commit e876e710ede23f670494331e062d643928e4142a ]

Notifier callbacks shouldn't return negative errno but one of the
NOTIFY_OK/DONE/BAD values.

The OPP core will ignore return values from notifiers but returning a
value that matches NOTIFY_STOP_MASK will stop the notification chain.

Fix by always returning NOTIFY_OK.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: max9611: Fix too short conversion time delay

[ Upstream commit 9fd229c478fbf77c41c8528aa757ef14210365f6 ]

As of commit b9ddd5091160793e ("iio: adc: max9611: Fix temperature
reading in probe"), max9611 initialization sometimes fails on the
Salvator-X(S) development board with:

    max9611 4-007f: Invalid value received from ADC 0x8000: aborting
    max9611: probe of 4-007f failed with error -5

The max9611 driver tests communications with the chip by reading the die
temperature during the probe function, which returns an invalid value.

According to the datasheet, the typical ADC conversion time is 2 ms, but
no minimum or maximum values are provided.  Maxim Technical Support
confirmed this was tested with temperature Ta=25 degreeC, and promised
to inform me if a maximum/minimum value is available (they didn't get
back to me, so I assume it is not).

However, the driver assumes a 1 ms conversion time.  Usually the
usleep_range() call returns after more than 1.8 ms, hence it succeeds.
When it returns earlier, the data register may be read too early, and
the previous measurement value will be returned.  After boot, this is
the temperature POR (power-on reset) value, causing the failure above.

Fix this by increasing the delay from 1000-2000 µs to 3000-3300 µs.

Note that this issue has always been present, but it was exposed by the
aformentioned commit.

Fixes: 69780a3bbc0b1e7e ("iio: adc: Add Maxim max9611 ADC driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fixed kernel panic when booting with DP-to-HDMI dongle

[ Upstream commit a51d9f8fe756beac51ce26ef54195da00a260d13 ]

[Why]
In dc_link_is_dp_sink_present, if dal_ddc_open fails, then
dal_gpio_destroy_ddc is called, destroying pin_data and pin_clock. They
are created only on dc_construct, and next aux access will cause a panic.

[How]
Instead of calling dal_gpio_destroy_ddc, call dal_ddc_close.

Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: add cache flush workaround to gfx8 emit_fence

[ Upstream commit bf26da927a1cd57c9deb2db29ae8cf276ba8b17b ]

The same workaround is used for gfx7.
Both PAL and Mesa use it for gfx8 too, so port this commit to
gfx_v8_0_ring_emit_fence_gfx.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: add check before enabling/disabling broadcast mode

[ Upstream commit 6e807535dae5dbbd53bcc5e81047a20bf5eb08ea ]

When security violation from new vbios happens, data fabric is
risky to stop working. So prevent the direct access to DF
mmFabricConfigAccessControl from the new vbios and onwards.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fc: fix double-free scenarios on hw queues

[ Upstream commit c869e494ef8b5846d9ba91f1e922c23cd444f0c1 ]

If an error occurs on one of the ios used for creating an
association, the creating routine has error paths that are
invoked by the command failure and the error paths will free
up the controller resources created to that point.

But... the io was ultimately determined by an asynchronous
completion routine that detected the error and which
unconditionally invokes the error_recovery path which calls
delete_association. Delete association deletes all outstanding
io then tears down the controller resources. So the
create_association thread can be running in parallel with
the error_recovery thread. What was seen was the LLDD received
a call to delete a queue, causing the LLDD to do a free of a
resource, then the transport called the delete queue again
causing the driver to repeat the free call. The second free
routine corrupted the allocator. The transport shouldn't be
making the duplicate call, and the delete queue is just one
of the resources being freed.

To fix, it is realized that the create_association path is
completely serialized with one command at a time. So the
failed io completion will always be seen by the create_association
path and as of the failure, there are no ios to terminate and there
is no reason to be manipulating queue freeze states, etc.
The serialized condition stays true until the controller is
transitioned to the LIVE state. Thus the fix is to change the
error recovery path to check the controller state and only
invoke the teardown path if not already in the CONNECTING state.

Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme_fc: add module to ops template to allow module references

[ Upstream commit 863fbae929c7a5b64e96b8a3ffb34a29eefb9f8f ]

In nvme-fc: it's possible to have connected active controllers
and as no references are taken on the LLDD, the LLDD can be
unloaded.  The controller would enter a reconnect state and as
long as the LLDD resumed within the reconnect timeout, the
controller would resume.  But if a namespace on the controller
is the root device, allowing the driver to unload can be problematic.
To reload the driver, it may require new io to the boot device,
and as it's no longer connected we get into a catch-22 that
eventually fails, and the system locks up.

Fix this issue by taking a module reference for every connected
controller (which is what the core layer did to the transport
module). Reference is cleared when the controller is removed.

Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.93

spi: fsl: use platform_get_irq() instead of of_irq_to_resource()

commit 63aa6a692595d47a0785297b481072086b9272d2 upstream.

Unlike irq_of_parse_and_map() which has a dummy definition on SPARC,
of_irq_to_resource() hasn't.

But as platform_get_irq() can be used instead and is generic, use it.

Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes:  3194d2533eff ("spi: fsl: don't map irq during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/091a277fd0b3356dca1e29858c1c96983fc9cb25.1576172743.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>