review.tizen.org Git - platform/kernel/linux-rpi.git/log

scsi: qla2xxx: Remove aborting ELS IOCB call issued as part of timeout.

commit bf07ef86e882013522876f7c834c8eea085f35b4 upstream.

This fix the spinlock recursion issue seen while unloading the driver.

14 [ffff9f2e21e03db8] native_queued_spin_lock_slowpath at ffffffffad0d8802
15 [ffff9f2e21e03dc0] do_raw_spin_lock at ffffffffad0d99e4
16 [ffff9f2e21e03dd8] _raw_spin_lock_irqsave at ffffffffad652471
17 [ffff9f2e21e03e00] qla2x00_els_dcmd_iocb_timeout at ffffffffc070cd63
18 [ffff9f2e21e03e40] qla2x00_sp_timeout at ffffffffc06f06d3 [qla2xxx]
19 [ffff9f2e21e03e68] call_timer_fn at ffffffffad0f97d8
20 [ffff9f2e21e03ed8] run_timer_softirq at ffffffffad0faf47
21 [ffff9f2e21e03f68] __softirqentry_text_start at ffffffffad655f32

Fixes: 6eb54715b54bb ("qla2xxx: Added interface to send explicit LOGO.")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Defer processing of GS IOCB calls

commit 5d3300a9b8b122b4743aed5a178bf12c87e2b8c9 upstream.

This patch defers processing of GS IOCB calls from interrupt context to
avoid hardware spinlock recursion.

Following stack trace is seen

? mod_timer+0x193/0x330
? ql_dbg+0xa7/0xf0 [qla2xxx]
_raw_spin_lock_irqsave+0x31/0x40
qla2x00_start_sp+0x3b/0x250 [qla2xxx]
qla24xx_async_gnl+0x1d3/0x240 [qla2xxx]
qla24xx_fcport_handle_login+0x285/0x290 [qla2xxx]
? vprintk_func+0x20/0x50

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Clear loop id after delete

commit ba743f9148e951abe1c94f89c174ec8e44fb145b upstream.

Clear loop id after delete to prevent session invalidation of stale
session.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix scan state field for fcport

commit 76f9a2dd4c60183879a1898bcd56a1dbab19a85d upstream.

Add correct value of scan_state field indicating state of the FC port

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport

commit 063b36d6b0ad74c748d536f5cb47bac2f850a0fa upstream.

Current code manually allocate an fcport structure that is not properly
initialize. Replace kzalloc with qla2x00_alloc_fcport, so that all
fields are initialized. Also set set scan flag to port found

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix abort command deadlock due to spinlock

commit b0dcce746b32ac573343ad39cb3dc485030de95e upstream.

Original code acquires hardware_lock to add Abort IOCB onto driver
request queue for processing. However, abort_command() will also acquire
hardware lock to look up sp pointer before issuing abort IOCB command
resulting into a deadlock. This patch safely removes the possible
deadlock scenario by removing extra spinlock.

Fixes: 6eb54715b54bb ("qla2xxx: Added interface to send explicit LOGO.")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix PRLI state check

commit 23c645595dab7b414f23639d0a428a07515807df upstream.

Get Port Database MBX cmd is to validate current Login state upon PRLI
completion. Current code looks at the last login state for re-validation
which was incorrect. This patch removed incorrect state check.

Fixes: 15f30a5752287 ("qla2xxx: Use IOCB interface to submit non-critical MBX.")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix Relogin being triggered too fast

commit 4005a995668b8fd58f4cf1460dd4cf63efa18363 upstream.

Current driver design schedules relogin process via DPC thread every 1
second. In a large fabric, this DPC thread tries to schedule too many
jobs and might get overloaded. As a result of this processing of DPC
thread, it can schedule relogin earlier than 1 second.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix NPIV host cleanup in target mode

commit 3be63b1e1838e35ce93e83f19573e949f4b389b4 upstream.

Add check to make sure we are cleaning up global target host list only
for NPIV hosts

Fixes: bdbe24de281e2 ("scsi: qla2xxx: Cleanup NPIV host in target mode during config teardown")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix login state machine stuck at GPDB

commit 414d9ff3f8039f85d23f619dcbbd1ba2628a1a67 upstream.

This patch returns discovery state machine back to Login Complete.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Serialize GPNID for multiple RSCN

commit 2d73ac6102d943c4be4945735a338005359c6abc upstream.

GPNID is triggered by RSCN. For multiple RSCNs of the same affected
NPORT ID, serialize the GPNID to prevent confusion.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Retry switch command on time out

commit 25ad76b703d9ad536f3411b15b1070aeb059ab55 upstream.

Retry GID_PN & GPN_ID switch commands for time out case.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix re-login for Nport Handle in use

commit a084fd68e1d26174c4cc1a13fbb0112f468ff7f4 upstream.

When NPort Handle is in use, driver needs to mark the handle as used and
pick another. Instead, the code clears the handle and re-pick the same
handle.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Skip IRQ affinity for Target QPairs

commit d68b850e1bfb9afb24b888a946165a186a710195 upstream.

Fix co-existence between Block MQ and Target Mode. Block MQ and
initiator mode requires midlayer queue mapping to check for IRQ to be
affinitized. For target mode, it's not the case.

Fixes: 09620eeb62c41 ("scsi: qla2xxx: Add debug knob for user control workload")
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Move session delete to driver work queue

commit a01c77d2cbc45ba527e884e5c30363a1200a4130 upstream.

Move session delete from system work queue to driver's work queue for in
time processing.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix gpnid error processing

commit 22e786ea47f8795c561e1a01b6a66bb2cae2fc20 upstream.

Stop GPNID command from advancing if command has failed.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix system crash for Notify ack timeout handling

commit 2e01d0ba868ec1d4d55ddcba519339e072b0bf4d upstream.

Fix NULL pointer crash due to missing timeout handling callback for
Notify Ack IOCB.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: only attempt to disable the LPC CLKRUN if is already enabled

commit 6c9f0ce0dffe64da2204f38b0fd90f3ae2a8903c upstream.

Commit 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems")
added logic in the TPM TIS driver to disable the Low Pin Count CLKRUN
signal during TPM transactions.

Unfortunately this breaks other devices that are attached to the LPC bus
like for example PS/2 mouse and keyboards.

One flaw with the logic is that it assumes that the CLKRUN is always
enabled, and so it unconditionally enables it after a TPM transaction.

But it could be that the CLKRUN# signal was already disabled in the LPC
bus and so after the driver probes, CLKRUN_EN will remain enabled which
may break other devices that are attached to the LPC bus but don't have
support for the CLKRUN protocol.

Fixes: 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: James Ettle <james@ettle.org.uk>
Tested-by: Jeffery Miller <jmiller@neverware.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: remove unused variables

commit 68021bf4734d15c9a9ed1c1072b9ebcfda3e39cc upstream.

The CLKRUN fix caused a few harmless compile-time warnings:

drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_pnp_remove':
drivers/char/tpm/tpm_tis.c:274:23: error: unused variable 'priv' [-Werror=unused-variable]
drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_plat_remove':
drivers/char/tpm/tpm_tis.c:324:23: error: unused variable 'priv' [-Werror=unused-variable]

This removes the variables that have now become unused.

Fixes: 6d0866cbc2d3 ("tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: delete the TPM_TIS_CLK_ENABLE flag

commit 764325add6c2ad1641199edde7b2995495fc2d7c upstream.

This flag is only used to warn if CLKRUN_EN wasn't disabled on Braswell
systems, but the only way this can happen is if the code is not correct.

So it's an unnecessary check that just makes the code harder to read.

Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()

commit b3e958ce4c585bf666de249dc794971ebc62d2d3 upstream.

Commit 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell
systems") disabled CLKRUN protocol during TPM transactions and re-enabled
once the transaction is completed. But there were still some corner cases
observed where, reading of TPM header failed for savestate command
while going to suspend, which resulted in suspend failure.
To fix this issue keep the CLKRUN protocol disabled for the entire
duration of a single TPM command and not disabling and re-enabling
again for every TPM transaction. For the other TPM accesses outside
TPM command flow, add a higher level of disabling and re-enabling
the CLKRUN protocol, instead of doing for every TPM transaction.

Fixes: 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell systems")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm_tis: Move ilb_base_addr to tpm_tis_data

commit c382babccba2c82fe57f9e647f290fb7bf4d130d upstream.

Move static variable ilb_base_addr to tpm_tis_data.

Cc: stable@vger.kernel.org
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: use skb_to_full_sk in ip6_route_me_harder

commit 7d98386d55a5afaa65de77e1e9197edeb8a42079 upstream.

For some reason, Florian forgot to apply to ip6_route_me_harder
the fix that went in commit 29e09229d9f2 ("netfilter: use
skb_to_full_sk in ip_route_me_harder")

Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pkt

commit b078556aecd791b0e5cb3a59f4c3a14273b52121 upstream.

l4proto->manip_pkt() can cause reallocation of skb head so pointer
to the ipv6 header must be reloaded.

Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com>
Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: bridge: ebt_among: add missing match size checks

commit c4585a2823edf4d1326da44d1524ecbfda26bb37 upstream.

ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.

Therefore it must check that the size of the match structure
provided from userspace is sane by making sure em->match_size
is at least the minimum size of the expected structure.

The module has such a check, but its only done after accessing
a structure that might be out of bounds.

tested with: ebtables -A INPUT ... \
--among-dst fe:fe:fe:fe:fe:fe
--among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe
--among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe

Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets

commit b71812168571fa55e44cdd0254471331b9c4c4c6 upstream.

We need to make sure the offsets are not out of range of the
total size.
Also check that they are in ascending order.

The WARN_ON triggered by syzkaller (it sets panic_on_warn) is
changed to also bail out, no point in continuing parsing.

Briefly tested with simple ruleset of
-A INPUT --limit 1/s' --log
plus jump to custom chains using 32bit ebtables binary.

Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: IDLETIMER: be syzkaller friendly

commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream.

We had one report from syzkaller [1]

First issue is that INIT_WORK() should be done before mod_timer()
or we risk timer being fired too soon, even with a 1 second timer.

Second issue is that we need to reject too big info->timeout
to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or
risk looping, if result after overflow is 0.

[1]
WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1dc/0x200 kernel/panic.c:547
report_bug+0x211/0x2d0 lib/bug.c:184
fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
fixup_bug arch/x86/kernel/traps.c:247 [inline]
do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988
RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
RSP: 0018:ffff8801db507538 EFLAGS: 00010006
RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404
RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082
RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c
R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6
R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000
queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488
queue_work include/linux/workqueue.h:488 [inline]
schedule_work include/linux/workqueue.h:546 [inline]
idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116
call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
expire_timers kernel/time/timer.c:1363 [inline]
__run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
__do_softirq+0x2d7/0xb85 kernel/softirq.c:285
invoke_softirq kernel/softirq.c:365 [inline]
irq_exit+0x1cc/0x200 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:541 [inline]
smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184
RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12
RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006
RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282
RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8
R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278
__debug_object_init+0x235/0x1040 lib/debugobjects.c:378
debug_object_init+0x17/0x20 lib/debugobjects.c:391
__init_work+0x2b/0x60 kernel/workqueue.c:506
idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline]
idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213
xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850
check_target net/ipv6/netfilter/ip6_tables.c:533 [inline]
find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575
translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744
do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline]
do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927
udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976
SYSC_setsockopt net/socket.c:1850 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1829
do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nat: cope with negative port range

commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream.

syzbot reported a division by 0 bug in the netfilter nat code:

divide error: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88
RSP: 0018:ffff8801b2466778 EFLAGS: 00010246
RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c
RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac
RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900
R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153
R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c
FS:  00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30
  get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362
  nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406
  nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124
  redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41
  nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302
  nf_nat_ipv6_local_fn+0x33/0x5d0
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407
  ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook include/linux/netfilter.h:243 [inline]
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277
  inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
  dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142
  dccp_connect+0x369/0x670 net/dccp/output.c:564
  dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946
  __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620
  inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684
  SYSC_connect+0x213/0x4a0 net/socket.c:1639
  SyS_connect+0x24/0x30 net/socket.c:1620
  do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x441c69
RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69
RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590
R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000
Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b
45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48
c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01
RIP: nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778

The problem is that currently we don't have any check on the
configured port range. A port range == -1 triggers the bug, while
other negative values may require a very long time to complete the
following loop.

This commit addresses the issue swapping the two ends on negative
ranges. The check is performed in nf_nat_l4proto_unique_tuple() since
the nft nat loads the port values from nft registers at runtime.

v1 -> v2: use the correct 'Fixes' tag
v2 -> v3: update commit message, drop unneeded READ_ONCE()

Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack")
Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: fix missing timer initialization in xt_LED

commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream.

syzbot reported that xt_LED may try to use the ledinternal->timer
without previously initializing it:

------------[ cut here ]------------
kernel BUG at kernel/time/timer.c:958!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline]
RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102
RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293
RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6
RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68
RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c
R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000
R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90
FS:  0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491
  ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633
  addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008
  process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
  worker_thread+0x223/0x1990 kernel/workqueue.c:2247
  kthread+0x33c/0x400 kernel/kthread.c:238
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429
Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb
57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3
57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70
RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8
RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8
---[ end trace f661ab06f5dd8b3d ]---

The ledinternal struct can be shared between several different
xt_LED targets, but the related timer is currently initialized only
if the first target requires it. Fix it by unconditionally
initializing the timer struct.

v1 -> v2: call del_timer_sync() unconditionally, too.

Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target")
Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_hashlimit: fix lock imbalance

commit de526f401284e1638d4c97cb5a4c292ac3f37655 upstream.

syszkaller found that rcu was not held in hashlimit_mt_common()

We only need to enable BH at this point.

Fixes: bea74641e378 ("netfilter: xt_hashlimit: add rate match mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation

commit b3e456fce9f51d6276e576d00271e2813c1b8b67 upstream.

There is a race condition between clusterip_config_entry_put()
and clusterip_config_init(), after we release the spinlock in
clusterip_config_entry_put(), a new proc file with a same IP could
be created immediately since it is already removed from the configs
list, therefore it triggers this warning:

------------[ cut here ]------------
proc_dir_entry 'ipt_CLUSTERIP/172.20.0.170' already registered
WARNING: CPU: 1 PID: 4152 at fs/proc/generic.c:330 proc_register+0x2a4/0x370 fs/proc/generic.c:329
Kernel panic - not syncing: panic_on_warn set ...

As a quick fix, just move the proc_remove() inside the spinlock.

Reported-by: <syzbot+03218bcdba6aa76441a3@syzkaller.appspotmail.com>
Fixes: 6c5d5cfbe3c5 ("netfilter: ipt_CLUSTERIP: check duplicate config when initializing")
Tested-by: Paolo Abeni <pabeni@redhat.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: add back stackpointer size checks

commit 57ebd808a97d7c5b1e1afb937c2db22beba3c1f8 upstream.

The rationale for removing the check is only correct for rulesets
generated by ip(6)tables.

In iptables, a jump can only occur to a user-defined chain, i.e.
because we size the stack based on number of user-defined chains we
cannot exceed stack size.

However, the underlying binary format has no such restriction,
and the validation step only ensures that the jump target is a
valid rule start point.

IOW, its possible to build a rule blob that has no user-defined
chains but does contain a jump.

If this happens, no jump stack gets allocated and crash occurs
because no jumpstack was allocated.

Fixes: 7814b6ec6d0d6 ("netfilter: xtables: don't save/restore jumpstack offset")
Reported-by: syzbot+e783f671527912cd9403@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: kbl: fix jack name

commit cedb6415f9ece6d3368aa0ac8a433caff799792a upstream.

Commit d1c4cb447a7e ("ASoC: Intel: Skylake: Fix jack name format
substitution") added Jack name but erroneously added a space as well,
so remove the space in Jack name.

Fixes: d1c4cb447a7e ("ASoC: Intel: Skylake: Fix jack name format substitution")
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Skylake: Fix jack name format substitution

commit d1c4cb447a7efcb5608a33cdfed8ab4234378b0a upstream.

Jack name is not getting formatted correctly hence resulting
in invalid name for HDMI/DP input devices.

This was recently exposed due changes brought by MST:
commit 3a13347f05fd ("ASoC: Intel: kbl: Add jack port initialize
in kbl machine drivers")

Signed-off-by: Chintan Patel <chintan.m.patel@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds

commit 863204cfdae98626a92535ac928ad79f4d6b74ff upstream.

In configurations without CONFIG_OMAP3 but with secure RAM support,
we now run into a link failure:

arch/arm/mach-omap2/omap-secure.o: In function `omap3_save_secure_ram':
omap-secure.c:(.text+0x130): undefined reference to `save_secure_ram_context'

The omap3_save_secure_ram() function is only called from the OMAP34xx
power management code, so we can simply hide that function in the
appropriate #ifdef.

Fixes: d09220a887f7 ("ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context")
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: Remove legacy NMI sourcing.

commit 2b3d89b402b085b08498e896c65267a145bed486 upstream.

Gen8 and prior Proliant systems supported the "CRU" interface
to firmware.  This interfaces allows linux to "call back" into firmware
to source the cause of an NMI.  This feature isn't fully utilized
as the actual source of the NMI isn't printed, the driver only
indicates that the source couldn't be determined when the call
fails.

With the advent of Gen9, iCRU replaces the CRU. The call back
feature is no longer available in firmware.  To be compatible and
not attempt to call back into firmware on system not supporting CRU,
the SMBIOS table is consulted to determine if it is safe to
make the call back or not.

This results in about half of the driver code being devoted
to either making CRU calls or determing if it is safe to make
CRU calls.  As noted, the driver isn't really using the results of
the CRU calls.

Furthermore, as a consequence of the Spectre security issue, the
BIOS/EFI calls are being wrapped into Spectre-disabling section.
Removing the call back in hpwdt_pretimeout assists in this effort.

As the CRU sourcing of the NMI isn't required for handling the
NMI and there are security concerns with making the call back, remove
the legacy (pre Gen9) NMI sourcing and the DMI code to determine if
the system had the CRU interface.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: fix unused variable warning

commit aeebc6ba88ba3758ad95467ff6191fabf2074c13 upstream.

The new hpwdt_my_nmi() function is used conditionally, which produces
a harmless warning in some configurations:

drivers/watchdog/hpwdt.c:478:12: error: 'hpwdt_my_nmi' defined but not used [-Werror=unused-function]

This moves it inside of the #ifdef that protects its caller, to silence
the warning.

Fixes: 621174a92851 ("watchdog: hpwdt: Check source of NMI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: Check source of NMI

commit 838534e50e2e5c1e644e30ab6cb28da88eb31368 upstream.

Do not claim the NMI (i.e. return NMI_DONE) if the source of
the NMI isn't the iLO watchdog or debug.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: SMBIOS check

commit c42cbe41727a138905a28f8e0b00c147be77ee93 upstream.

This corrects:
commit cce78da76601 ("watchdog: hpwdt: Add check for UEFI bits")

The test on HPE SMBIOS extension type 219 record "Misc Features"
bits for UEFI support is incorrect. The definition of the Misc Features
bits in the HPE SMBIOS OEM Extensions specification (and related
firmware) was changed to use a different pair of bits to
represent UEFI supported. Howerver, a corresponding change
to Linux was missed.

Current code/platform work because the iCRU test is working.
But purpose of cce78da766 is to ensure correct functionality
on future systems where iCRU isn't supported.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: move "_all" target out of $(KBUILD_SRC) conditional

commit ba634eceb535d95e87ef09caae7814b3687c6036 upstream.

The first "_all" occurrence around line 120 is only visible when
KBUILD_SRC is unset.

If O=... is specified, the working directory is relocated, then the
only second occurrence around line 193 is visible, that is not set
to PHONY.

Move the first one to an always visible place. This clarifies "_all"
is our default target and it is always set to PHONY.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.26

KVM: x86: fix backward migration with async_PF

commit fe2a3027e74e40a3ece3a4c1e4e51403090a907a upstream.

Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT
bit when enabling async_PF, but this bit is reserved on old hypervisors,
which results in a failure upon migration.

To avoid breaking different cases, we are checking for CPUID feature bit
before enabling the feature and nothing else.

Fixes: 52a5c155cf79 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode")
Cc: <stable@vger.kernel.org>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[jwang: port to 4.14]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, ppc64: fix out of bounds access in tail call

[ upstream commit d269176e766c71c998cb75b4ea8cbc321cc0019d ]

While working on 16338a9b3ac3 ("bpf, arm64: fix out of bounds access in
tail call") I noticed that ppc64 JIT is partially affected as well. While
the bound checking is correctly performed as unsigned comparison, the
register with the index value however, is never truncated into 32 bit
space, so e.g. a index value of 0x100000000ULL with a map of 1 element
would pass with PPC_CMPLW() whereas we later on continue with the full
64 bit register value. Therefore, as we do in interpreter and other JITs
truncate the value to 32 bit initially in order to fix access.

Fixes: ce0761419fae ("powerpc/bpf: Implement support for tail calls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: allow xadd only on aligned memory

[ upstream commit ca36960211eb228bcbc7aaebfa0d027368a94c60 ]

The requirements around atomic_add() / atomic64_add() resp. their
JIT implementations differ across architectures. E.g. while x86_64
seems just fine with BPF's xadd on unaligned memory, on arm64 it
triggers via interpreter but also JIT the following crash:

  [  830.864985] Unable to handle kernel paging request at virtual address ffff8097d7ed6703
  [...]
  [  830.916161] Internal error: Oops: 96000021 [#1] SMP
  [  830.984755] CPU: 37 PID: 2788 Comm: test_verifier Not tainted 4.16.0-rc2+ #8
  [  830.991790] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.29 07/17/2017
  [  830.998998] pstate: 80400005 (Nzcv daif +PAN -UAO)
  [  831.003793] pc : __ll_sc_atomic_add+0x4/0x18
  [  831.008055] lr : ___bpf_prog_run+0x1198/0x1588
  [  831.012485] sp : ffff00001ccabc20
  [  831.015786] x29: ffff00001ccabc20 x28: ffff8017d56a0f00
  [  831.021087] x27: 0000000000000001 x26: 0000000000000000
  [  831.026387] x25: 000000c168d9db98 x24: 0000000000000000
  [  831.031686] x23: ffff000008203878 x22: ffff000009488000
  [  831.036986] x21: ffff000008b14e28 x20: ffff00001ccabcb0
  [  831.042286] x19: ffff0000097b5080 x18: 0000000000000a03
  [  831.047585] x17: 0000000000000000 x16: 0000000000000000
  [  831.052885] x15: 0000ffffaeca8000 x14: 0000000000000000
  [  831.058184] x13: 0000000000000000 x12: 0000000000000000
  [  831.063484] x11: 0000000000000001 x10: 0000000000000000
  [  831.068783] x9 : 0000000000000000 x8 : 0000000000000000
  [  831.074083] x7 : 0000000000000000 x6 : 000580d428000000
  [  831.079383] x5 : 0000000000000018 x4 : 0000000000000000
  [  831.084682] x3 : ffff00001ccabcb0 x2 : 0000000000000001
  [  831.089982] x1 : ffff8097d7ed6703 x0 : 0000000000000001
  [  831.095282] Process test_verifier (pid: 2788, stack limit = 0x0000000018370044)
  [  831.102577] Call trace:
  [  831.105012]  __ll_sc_atomic_add+0x4/0x18
  [  831.108923]  __bpf_prog_run32+0x4c/0x70
  [  831.112748]  bpf_test_run+0x78/0xf8
  [  831.116224]  bpf_prog_test_run_xdp+0xb4/0x120
  [  831.120567]  SyS_bpf+0x77c/0x1110
  [  831.123873]  el0_svc_naked+0x30/0x34
  [  831.127437] Code: 97fffe97 17ffffec 00000000 f9800031 (885f7c31)

Reason for this is because memory is required to be aligned. In
case of BPF, we always enforce alignment in terms of stack access,
but not when accessing map values or packet data when the underlying
arch (e.g. arm64) has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set.

xadd on packet data that is local to us anyway is just wrong, so
forbid this case entirely. The only place where xadd makes sense in
fact are map values; xadd on stack is wrong as well, but it's been
around for much longer. Specifically enforce strict alignment in case
of xadd, so that we handle this case generically and avoid such crashes
in the first place.

Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: add schedule points in percpu arrays management

[ upstream commit 32fff239de37ef226d5b66329dd133f64d63b22d ]

syszbot managed to trigger RCU detected stalls in
bpf_array_free_percpu()

It takes time to allocate a huge percpu map, but even more time to free
it.

Since we run in process context, use cond_resched() to yield cpu if
needed.

Fixes: a10423b87a7e ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, arm64: fix out of bounds access in tail call

[ upstream commit 16338a9b3ac30740d49f5dfed81bac0ffa53b9c7 ]

I recently noticed a crash on arm64 when feeding a bogus index
into BPF tail call helper. The crash would not occur when the
interpreter is used, but only in case of JIT. Output looks as
follows:

  [  347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510
  [...]
  [  347.043065] [fffb850e96492510] address between user and kernel address ranges
  [  347.050205] Internal error: Oops: 96000004 [#1] SMP
  [...]
  [  347.190829] x13: 0000000000000000 x12: 0000000000000000
  [  347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10
  [  347.201427] x9 : 0000000000000000 x8 : 0000000000000000
  [  347.206726] x7 : 0000000000000000 x6 : 001c991738000000
  [  347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a
  [  347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500
  [  347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500
  [  347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61)
  [  347.235221] Call trace:
  [  347.237656]  0xffff000002f3a4fc
  [  347.240784]  bpf_test_run+0x78/0xf8
  [  347.244260]  bpf_prog_test_run_skb+0x148/0x230
  [  347.248694]  SyS_bpf+0x77c/0x1110
  [  347.251999]  el0_svc_naked+0x30/0x34
  [  347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b)
  [...]

In this case the index used in BPF r3 is the same as in r1
at the time of the call, meaning we fed a pointer as index;
here, it had the value 0xffff808fd7cf0500 which sits in x2.

While I found tail calls to be working in general (also for
hitting the error cases), I noticed the following in the code
emission:

  # bpftool p d j i 988
  [...]
  38:   ldr     w10, [x1,x10]
  3c:   cmp     w2, w10
  40:   b.ge    0x000000000000007c              <-- signed cmp
  44:   mov     x10, #0x20                      // #32
  48:   cmp     x26, x10
  4c:   b.gt    0x000000000000007c
  50:   add     x26, x26, #0x1
  54:   mov     x10, #0x110                     // #272
  58:   add     x10, x1, x10
  5c:   lsl     x11, x2, #3
  60:   ldr     x11, [x10,x11]                  <-- faulting insn (f86b694b)
  64:   cbz     x11, 0x000000000000007c
  [...]

Meaning, the tests passed because commit ddb55992b04d ("arm64:
bpf: implement bpf_tail_call() helper") was using signed compares
instead of unsigned which as a result had the test wrongly passing.

Change this but also the tail call count test both into unsigned
and cap the index as u32. Latter we did as well in 90caccdd8cc0
("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here,
too. Tested on HiSilicon Hi1616.

Result after patch:

  # bpftool p d j i 268
  [...]
  38: ldr w10, [x1,x10]
  3c: add w2, w2, #0x0
  40: cmp w2, w10
  44: b.cs 0x0000000000000080
  48: mov x10, #0x20                   // #32
  4c: cmp x26, x10
  50: b.hi 0x0000000000000080
  54: add x26, x26, #0x1
  58: mov x10, #0x110                  // #272
  5c: add x10, x1, x10
  60: lsl x11, x2, #3
  64: ldr x11, [x10,x11]
  68: cbz x11, 0x0000000000000080
  [...]

Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x64: implement retpoline for tail call

[ upstream commit a493a87f38cfa48caaa95c9347be2d914c6fdf29 ]

Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).

JIT dump after patch:

  # bpftool p d x i 1
   0: (18) r2 = map[id:1]
   2: (b7) r3 = 0
   3: (85) call bpf_tail_call#12
   4: (b7) r0 = 2
   5: (95) exit

With CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33: cmp    %edx,0x24(%rsi)
  36: jbe    0x0000000000000072  |*
  38: mov    0x24(%rbp),%eax
  3e: cmp    $0x20,%eax
  41: ja     0x0000000000000072  |
  43: add    $0x1,%eax
  46: mov    %eax,0x24(%rbp)
  4c: mov    0x90(%rsi,%rdx,8),%rax
  54: test   %rax,%rax
  57: je     0x0000000000000072  |
  59: mov    0x28(%rax),%rax
  5d: add    $0x25,%rax
  61: callq  0x000000000000006d  |+
  66: pause                      |
  68: lfence                     |
  6b: jmp    0x0000000000000066  |
  6d: mov    %rax,(%rsp)         |
  71: retq                       |
  72: mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  + retpoline for indirect jump

Without CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33: cmp    %edx,0x24(%rsi)
  36: jbe    0x0000000000000063  |*
  38: mov    0x24(%rbp),%eax
  3e: cmp    $0x20,%eax
  41: ja     0x0000000000000063  |
  43: add    $0x1,%eax
  46: mov    %eax,0x24(%rbp)
  4c: mov    0x90(%rsi,%rdx,8),%rax
  54: test   %rax,%rax
  57: je     0x0000000000000063  |
  59: mov    0x28(%rax),%rax
  5d: add    $0x25,%rax
  61: jmpq   *%rax               |-
  63: mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  - plain indirect jump as before

  [0] https://support.google.com/faqs/answer/7625886
  [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix rcu lockdep warning for lpm_trie map_free callback

[ upstream commit 6c5f61023c5b0edb0c8a64c902fe97c6453b1852 ]

Commit 9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function")
fixed a memory leak and removed unnecessary locks in map_free callback function.
Unfortrunately, it introduced a lockdep warning. When lockdep checking is turned on,
running tools/testing/selftests/bpf/test_lpm_map will have:

  [   98.294321] =============================
  [   98.294807] WARNING: suspicious RCU usage
  [   98.295359] 4.16.0-rc2+ #193 Not tainted
  [   98.295907] -----------------------------
  [   98.296486] /home/yhs/work/bpf/kernel/bpf/lpm_trie.c:572 suspicious rcu_dereference_check() usage!
  [   98.297657]
  [   98.297657] other info that might help us debug this:
  [   98.297657]
  [   98.298663]
  [   98.298663] rcu_scheduler_active = 2, debug_locks = 1
  [   98.299536] 2 locks held by kworker/2:1/54:
  [   98.300152]  #0:  ((wq_completion)"events"){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0
  [   98.301381]  #1:  ((work_completion)(&map->work)){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0

Since actual trie tree removal happens only after no other
accesses to the tree are possible, replacing
  rcu_dereference_protected(*slot, lockdep_is_held(&trie->lock))
with
  rcu_dereference_protected(*slot, 1)
fixed the issue.

Fixes: 9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function")
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix memory leak in lpm_trie map_free callback function

[ upstream commit 9a3efb6b661f71d5675369ace9257833f0e78ef3 ]

There is a memory leak happening in lpm_trie map_free callback
function trie_free. The trie structure itself does not get freed.

Also, trie_free function did not do synchronize_rcu before freeing
various data structures. This is incorrect as some rcu_read_lock
region(s) for lookup, update, delete or get_next_key may not complete yet.
The fix is to add synchronize_rcu in the beginning of trie_free.
The useless spin_lock is removed from this function as well.

Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix mlock precharge on arraymaps

[ upstream commit 9c2d63b843a5c8a8d0559cc067b5398aa5ec3ffc ]

syzkaller recently triggered OOM during percpu map allocation;
while there is work in progress by Dennis Zhou to add __GFP_NORETRY
semantics for percpu allocator under pressure, there seems also a
missing bpf_map_precharge_memlock() check in array map allocation.

Given today the actual bpf_map_charge_memlock() happens after the
find_and_alloc_map() in syscall path, the bpf_map_precharge_memlock()
is there to bail out early before we go and do the map setup work
when we find that we hit the limits anyway. Therefore add this for
array map as well.

Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements")
Fixes: a10423b87a7e ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map")
Reported-by: syzbot+adb03f3f0bb57ce3acda@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.25

nvme-rdma: don't suppress send completions

commit b4b591c87f2b0f4ebaf3a68d4f13873b241aa584 upstream.

The entire completions suppress mechanism is currently broken because the
HCA might retry a send operation (due to dropped ack) after the nvme
transaction has completed.

In order to handle this, we signal all send completions and introduce a
separate done handler for async events as they will be handled differently
(as they don't include in-capsule data by definition).

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: only allow remove_and_add_spares when no sync_thread running.

commit 39772f0a7be3b3dc26c74ea13fe7847fd1522c8b upstream.

The locking protocols in md assume that a device will
never be removed from an array during resync/recovery/reshape.
When that isn't happening, rcu or reconfig_mutex is needed
to protect an rdev pointer while taking a refcount. When
it is happening, that protection isn't needed.

Unfortunately there are cases were remove_and_add_spares() is
called when recovery might be happening: is state_store(),
slot_store() and hot_remove_disk().
In each case, this is just an optimization, to try to expedite
removal from the personality so the device can be removed from
the array. If resync etc is happening, we just have to wait
for md_check_recover to find a suitable time to call
remove_and_add_spares().

This optimization and not essential so it doesn't
matter if it fails.
So change remove_and_add_spares() to abort early if
resync/recovery/reshape is happening, unless it is called
from md_check_recovery() as part of a newly started recovery.
The parameter "this" is only NULL when called from
md_check_recovery() so when it is NULL, there is no need to abort.

As this can result in a NULL dereference, the fix is suitable
for -stable.

cc: yuyufen <yuyufen@huawei.com>
Cc: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Fixes: 8430e7e0af9a ("md: disconnect device from personality before trying to remove it.")
Cc: stable@ver.kernel.org (v4.8+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux

commit 74402055a2d3ec998a1ded599e86185a27d9bbf4 upstream.

The pinmuxing was missing for I2C1 which was causing intermittent issues
with the PMIC which is connected to I2C1. The bootloader did not quite
configure the I2C1 either, so when running at 2.6MHz, it was generating
errors at time.

This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz

Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo
DM3730 devkit")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: LogicPD SOM-LV: Fix I2C1 pinmux

commit 84c7efd607e7fb6933920322086db64654f669b2 upstream.

The pinmuxing was missing for I2C1 which was causing intermittent issues
with the PMIC which is connected to I2C1. The bootloader did not quite
configure the I2C1 either, so when running at 2.6MHz, it was generating
errors at times.

This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730
SOM-LV")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530

commit 36904703aeeeb6cd31993f1353c8325006229f9a upstream.

The i2c touchpad on Dell XPS 9570 and Precision M5530 doesn't work out
of box.

The touchpad relies on its _INI method to update its _HID value from
XXXX0000 to SYNA2393.

Also, the _STA relies on value of I2CN to report correct status.

Set acpi_gbl_parse_table_as_term_list so the value of I2CN can be
correctly set up, and _INI can get run. The ACPI table in this machine
is designed to get parsed this way.

Also, change the quirk table to a more generic name.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM/x86: remove WARN_ON() for when vm_munmap() fails

commit 103c763c72dd2df3e8c91f2d7ec88f98ed391111 upstream.

On x86, special KVM memslots such as the TSS region have anonymous
memory mappings created on behalf of userspace, and these mappings are
removed when the VM is destroyed.

It is however possible for removing these mappings via vm_munmap() to
fail.  This can most easily happen if the thread receives SIGKILL while
it's waiting to acquire ->mmap_sem.   This triggers the 'WARN_ON(r < 0)'
in __x86_set_memory_region().  syzkaller was able to hit this, using
'exit()' to send the SIGKILL.  Note that while the vm_munmap() failure
results in the mapping not being removed immediately, it is not leaked
forever but rather will be freed when the process exits.

It's not really possible to handle this failure properly, so almost
every other caller of vm_munmap() doesn't check the return value.  It's
a limitation of having the kernel manage these mappings rather than
userspace.

So just remove the WARN_ON() so that users can't spam the kernel log
with this warning.

Fixes: f0d648bdf0a5 ("KVM: x86: map/unmap private slots in __x86_set_memory_region")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs()

commit 37b95951c58fdf08dc10afa9d02066ed9f176fb5 upstream.

kvm_valid_sregs() should use X86_CR0_PG and X86_CR4_PAE to check bit
status rather than X86_CR0_PG_BIT and X86_CR4_PAE_BIT. This patch is
to fix it.

Fixes: f29810335965a(KVM/x86: Check input paging mode when cs.l is set)
Reported-by: Jeremi Piotrowski <jeremi.piotrowski@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/ASPM: Deal with missing root ports in link state handling

commit ee8bdfb6568d86bb93f55f8d99c4c643e77304ee upstream.

Even though it is unconventional, some PCIe host implementations omit the
root ports entirely, and simply consist of a host bridge (which is not
modeled as a device in the PCI hierarchy) and a link.

When the downstream device is an endpoint, our current code does not seem
to mind this unusual configuration. However, when PCIe switches are
involved, the ASPM code assumes that any downstream switch port has a
parent, and blindly dereferences the bus->parent->self field of the pci_dev
struct to chain the downstream link state to the link state of the root
port. Given that the root port is missing, the link is not modeled at all,
and nor is the link state, and attempting to access it results in a NULL
pointer dereference and a crash.

Avoid this by allowing the link state chain to terminate at the downstream
port if no root port exists.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix vcpu initialization with userspace lapic

commit b7e31be385584afe7f073130e8e570d53c95f7fe upstream.

Moving the code around broke this rare configuration.
Use this opportunity to finally call lapic reset from vcpu reset.

Reported-by: syzbot+fb7a33a4b6c35007a72b@syzkaller.appspotmail.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 0b2e9904c159 ("KVM: x86: move LAPIC initialization after VMCS creation")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()

commit 946fbbc13dce68902f64515b610eeb2a6c3d7a64 upstream.

vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving
branch hints to the compiler can actually make a substantial cycle
difference by keeping the fast path contiguous in memory.

With this optimization, the retpoline-guest/retpoline-host case is
about 50 cycles faster.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: move LAPIC initialization after VMCS creation

commit 0b2e9904c15963e715d33e5f3f1387f17d19333a upstream.

The initial reset of the local APIC is performed before the VMCS has been
created, but it tries to do a vmwrite:

vmwrite error: reg 810 value 4a00 (err 18944)
CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G        W I      4.16.0-0.rc2.git0.1.fc28.x86_64 #1
Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014
Call Trace:
  vmx_set_rvi [kvm_intel]
  vmx_hwapic_irr_update [kvm_intel]
  kvm_lapic_reset [kvm]
  kvm_create_lapic [kvm]
  kvm_arch_vcpu_init [kvm]
  kvm_vcpu_init [kvm]
  vmx_create_vcpu [kvm_intel]
  kvm_vm_ioctl [kvm]

Move it later, after the VMCS has been created.

Fixes: 4191db26b714 ("KVM: x86: Update APICv on APIC reset")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM/x86: Remove indirect MSR op calls from SPEC_CTRL

commit ecb586bd29c99fb4de599dec388658e74388daad upstream.

Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets. It is also slower, so use
native_wrmsrl() on the vmentry path too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: mmu: Fix overlap between public and private memslots

commit b28676bb8ae4569cced423dc2a88f7cb319d5379 upstream.

Reported by syzkaller:

    pte_list_remove: ffff9714eb1f8078 0->BUG
    ------------[ cut here ]------------
    kernel BUG at arch/x86/kvm/mmu.c:1157!
    invalid opcode: 0000 [#1] SMP
    RIP: 0010:pte_list_remove+0x11b/0x120 [kvm]
    Call Trace:
     drop_spte+0x83/0xb0 [kvm]
     mmu_page_zap_pte+0xcc/0xe0 [kvm]
     kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm]
     kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm]
     kvm_arch_flush_shadow_all+0xe/0x10 [kvm]
     kvm_mmu_notifier_release+0x6c/0xa0 [kvm]
     ? kvm_mmu_notifier_release+0x5/0xa0 [kvm]
     __mmu_notifier_release+0x79/0x110
     ? __mmu_notifier_release+0x5/0x110
     exit_mmap+0x15a/0x170
     ? do_exit+0x281/0xcb0
     mmput+0x66/0x160
     do_exit+0x2c9/0xcb0
     ? __context_tracking_exit.part.5+0x4a/0x150
     do_group_exit+0x50/0xd0
     SyS_exit_group+0x14/0x20
     do_syscall_64+0x73/0x1f0
     entry_SYSCALL64_slow_path+0x25/0x25

The reason is that when creates new memslot, there is no guarantee for new
memslot not overlap with private memslots. This can be triggered by the
following program:

   #include <fcntl.h>
   #include <pthread.h>
   #include <setjmp.h>
   #include <signal.h>
   #include <stddef.h>
   #include <stdint.h>
   #include <stdio.h>
   #include <stdlib.h>
   #include <string.h>
   #include <sys/ioctl.h>
   #include <sys/stat.h>
   #include <sys/syscall.h>
   #include <sys/types.h>
   #include <unistd.h>
   #include <linux/kvm.h>

   long r[16];

   int main()
   {
void *p = valloc(0x4000);

r[2] = open("/dev/kvm", 0);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);

uint64_t addr = 0xf000;
ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr);
r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul);
ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul);
ioctl(r[6], KVM_RUN, 0);
ioctl(r[6], KVM_RUN, 0);

struct kvm_userspace_memory_region mr = {
.slot = 0,
.flags = KVM_MEM_LOG_DIRTY_PAGES,
.guest_phys_addr = 0xf000,
.memory_size = 0x4000,
.userspace_addr = (uintptr_t) p
};
ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr);
return 0;
   }

This patch fixes the bug by not adding a new memslot even if it
overlaps with private memslots.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>

KVM: X86: Fix SMRAM accessing even if VM is shutdown

commit 95e057e25892eaa48cad1e2d637b80d0f1a4fac5 upstream.

Reported by syzkaller:

   WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
   CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4
   RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
   Call Trace:
    vmx_handle_exit+0xbd/0xe20 [kvm_intel]
    kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm]
    kvm_vcpu_ioctl+0x3e9/0x720 [kvm]
    do_vfs_ioctl+0xa4/0x6a0
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x25/0x9c

The testcase creates a first thread to issue KVM_SMI ioctl, and then creates
a second thread to mmap and operate on the same vCPU.  This triggers a race
condition when running the testcase with multiple threads. Sometimes one thread
exits with a triple fault while another thread mmaps and operates on the same
vCPU.  Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler
results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE
in kvm_handle_bad_page(), which will go on to cause an emulation failure and an
exit with KVM_EXIT_INTERNAL_ERROR.

Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: extend usage of RET_MMIO_PF_* constants

commit 9b8ebbdb74b5ad76b9dfd8b101af17839174b126 upstream.

The x86 MMU if full of code that returns 0 and 1 for retry/emulate. Use
the existing RET_MMIO_PF_RETRY/RET_MMIO_PF_EMULATE enum, renaming it to
drop the MMIO part.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: kvm: fix building with gcc-8

commit 67870eb1204223598ea6d8a4467b482e9f5875b5 upstream.

In banked-sr.c, we use a top-level '__asm__(".arch_extension virt")'
statement to allow compilation of a multi-CPU kernel for ARMv6
and older ARMv7-A that don't normally support access to the banked
registers.

This is considered to be a programming error by the gcc developers
and will no longer work in gcc-8, where we now get a build error:

/tmp/cc4Qy7GR.s:34: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_usr'
/tmp/cc4Qy7GR.s:41: Error: Banked registers are not available with this architecture. -- `mrs r3,ELR_hyp'
/tmp/cc4Qy7GR.s:55: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_svc'
/tmp/cc4Qy7GR.s:62: Error: Banked registers are not available with this architecture. -- `mrs r3,LR_svc'
/tmp/cc4Qy7GR.s:69: Error: Banked registers are not available with this architecture. -- `mrs r3,SPSR_svc'
/tmp/cc4Qy7GR.s:76: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_abt'

Passign the '-march-armv7ve' flag to gcc works, and is ok here, because
we know the functions won't ever be called on pre-ARMv7VE machines.
Unfortunately, older compiler versions (4.8 and earlier) do not understand
that flag, so we still need to keep the asm around.

Backporting to stable kernels (4.6+) is needed to allow those to be built
with future compilers as well.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84129
Fixes: 33280b4cd1dc ("ARM: KVM: Add banked registers save/restore")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: mvebu: Fix broken PL310_ERRATA_753970 selects

commit 8aa36a8dcde3183d84db7b0d622ffddcebb61077 upstream.

The MACH_ARMADA_375 and MACH_ARMADA_38X boards select ARM_ERRATA_753970,
but it was renamed to PL310_ERRATA_753970 by commit fa0ce4035d48 ("ARM:
7162/1: errata: tidy up Kconfig options for PL310 errata workarounds").

Fix the selects to use the new name.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Fixes: fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for
PL310 errata workarounds"
cc: stable@vger.kernel.org
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: rockchip: Remove 1.8 GHz operation point from phycore som

commit 5ce0bad4ccd04c8a989e94d3c89e4e796ac22e48 upstream.

Rockchip recommends to run the CPU cores only with operations points of
1.6 GHz or lower.

Removed the cpu0 node with too high operation points and use the default
values instead.

Fixes: 903d31e34628 ("ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: orion: fix orion_ge00_switch_board_info initialization

commit 8337d083507b9827dfb36d545538b7789df834fd upstream.

A section type mismatch warning shows up when building with LTO,
since orion_ge00_mvmdio_bus_name was put in __initconst but not marked
const itself:

include/linux/of.h: In function 'spear_setup_of_timer':
arch/arm/mach-spear/time.c:207:34: error: 'timer_of_match' causes a section type conflict with 'orion_ge00_mvmdio_bus_name'
static const struct of_device_id timer_of_match[] __initconst = {
^
arch/arm/plat-orion/common.c:475:32: note: 'orion_ge00_mvmdio_bus_name' was declared here
static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
^

As pointed out by Andrew Lunn, it should in fact be 'const' but not
'__initconst' because the string is never copied but may be accessed
after the init sections are freed. To fix that, I get rid of the
extra symbol and rewrite the initialization in a simpler way that
assigns both the bus_id and modalias statically.

I spotted another theoretical bug in the same place, where d->netdev[i]
may be an out of bounds access, this can be fixed by moving the device
assignment into the loop.

Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix {pmd,pud}_{set,clear}_flags()

commit 842cef9113c2120f74f645111ded1e020193d84c upstream.

Just like pte_{set,clear}_flags() their PMD and PUD counterparts should
not do any address translation. This was outright wrong under Xen
(causing a dead boot with no useful output on "suitable" systems), and
produced needlessly more complicated code (even if just slightly) when
paravirt was enabled.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/5A8AF1BB02000078001A91C3@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nospec: Allow index argument to have const-qualified type

commit b98c6a160a057d5686a8c54c79cc6c8c94a7d0c8 upstream.

The last expression in a statement expression need not be a bare
variable, quoting gcc docs

  The last thing in the compound statement should be an expression
  followed by a semicolon; the value of this subexpression serves as the
  value of the entire construct.

and we already use that in e.g. the min/max macros which end with a
ternary expression.

This way, we can allow index to have const-qualified type, which will in
some cases avoid the need for introducing a local copy of index of
non-const qualified type. That, in turn, can prevent readers not
familiar with the internals of array_index_nospec from wondering about
the seemingly redundant extra variable, and I think that's worthwhile
considering how confusing the whole _nospec business is.

The expression _i&_mask has type unsigned long (since that is the type
of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to
that), so in order not to change the type of the whole expression, add
a cast back to typeof(_i).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/151881604837.17395.10812767547837568328.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: consider epoch index on TOD clock syncs

commit 1575767ef3cf5326701d2ae3075b7732cbc855e4 upstream.

For now, we don't take care of over/underflows. Especially underflows
are critical:

Assume the epoch is currently 0 and we get a sync request for delta=1,
meaning the TOD is moved forward by 1 and we have to fix it up by
subtracting 1 from the epoch. Right now, this will leave the epoch
index untouched, resulting in epoch=-1, epoch_idx=0, which is wrong.

We have to take care of over and underflows, also for the VSIE case. So
let's factor out calculation into a separate function.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-5-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[use u8 for idx]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: consider epoch index on hotplugged CPUs

commit d16b52cb9cdb6f06dea8ab2f0a428e7d7f0b0a81 upstream.

We must copy both, the epoch and the epoch_idx.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-4-david@redhat.com>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: provide only a single function for setting the tod (fix SCK)

commit 0e7def5fb0dc53ddbb9f62a497d15f1e11ccdc36 upstream.

Right now, SET CLOCK called in the guest does not properly take care of
the epoch index, as the call goes via the old kvm_s390_set_tod_clock()
interface. So the epoch index is neither reset to 0, if required, nor
properly set to e.g. 0xff on negative values.

Fix this by providing a single kvm_s390_set_tod_clock() function. Move
Multiple-epoch facility handling into it.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: take care of clock-comparator sign control

commit 5fe01793dd953ab947fababe8abaf5ed5258c8df upstream.

Missed when enabling the Multiple-epoch facility. If the facility is
installed and the control is set, a sign based comaprison has to be
performed.

Right now we would inject wrong interrupts and ignore interrupt
conditions. Also the sleep time is calculated in a wrong way.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-2-david@redhat.com>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNL

commit bf8486709ac7fad99e4040dea73fe466c57a4ae1 upstream.

Commit

3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")

decreased NUM_CHANNELS from 8 to 4, but this is not enough for Knights
Landing which supports up to 6 channels.

This caused out-of-bounds writes to pvt->mirror_mode and pvt->tolm
variables which don't pay critical role on KNL code path, so the memory
corruption wasn't causing any visible driver failures.

The easiest way of fixing it is to change NUM_CHANNELS to 6. Do that.

An alternative solution would be to restructure the KNL part of the
driver to 2MC/3channel representation.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anna Karbownik <anna.karbownik@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: jim.m.snow@intel.com
Cc: krzysztof.paliswiat@intel.com
Cc: lukasz.odzioba@intel.com
Cc: qiuxu.zhuo@intel.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")
Link: http://lkml.kernel.org/r/1519312693-4789-1-git-send-email-anna.karbownik@intel.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: m88ds3103: don't call a non-initalized function

commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream.

If m88d3103 chip ID is not recognized, the device is not initialized.

However, it returns from probe without any error, causing this OOPS:

[    7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    7.689297] pgd = 7b0bd7a7
[    7.689302] [00000000] *pgd=00000000
[    7.689318] Internal error: Oops: 80000005 [#1] SMP ARM
[    7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media
[    7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23
[    7.689361] Hardware name: BCM2835
[    7.689367] PC is at 0x0
[    7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103]
[    7.689386] pc : [<00000000>]    lr : [<bf0ae1ec>]    psr: 60000013
[    7.689391] sp : ed8e5c20  ip : ed8c1e00  fp : ed8945c0
[    7.689395] r10: ed894000  r9 : ed894378  r8 : eda736c0
[    7.689400] r7 : ed894070  r6 : ed8e5c44  r5 : bf0bb040  r4 : eda77600
[    7.689405] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : eda77600
[    7.689412] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    7.689417] Control: 10c5383d  Table: 2d8e806a  DAC: 00000051
[    7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63)
[    7.689428] Stack: (0xed8e5c20 to 0xed8e6000)
[    7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10
[    7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000
[    7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000
[    7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434
[    7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0
[    7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000
[    7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8
[    7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600
[    7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000
[    7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4
[    7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc
[    7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4
[    7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000
[    7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000
[    7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0
[    7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24
[    7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0
[    7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684
[    7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000
[    7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000
[    7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104
[    7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000
[    7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8
[    7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4
[    7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000
[    7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c
[    7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0
[    7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000
[    7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky])
[    7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2])
[    7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8)
[    7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4)
[    7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c)
[    7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c)
[    7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264)
[    7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4)
[    7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134)
[    7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168)
[    7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4)
[    7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8)
[    7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec)
[    7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54)
[    7.690018] Code: bad PC value

This may happen on normal circumstances, if, for some reason, the demod
hangs and start returning an invalid chip ID:

[   10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00

So, change the logic to cause probe to fail with -ENODEV, preventing
the OOPS.

Detected while testing DVB MMAP patches on Raspberry Pi 3 with
DVBSky S960CI.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch

commit 105976f517791aed3b11f8f53b308a2069d42055 upstream.

__blk_mq_requeue_request() covers two cases:

- one is that the requeued request is added to hctx->dispatch, such as
blk_mq_dispatch_rq_list()

- another case is that the request is requeued to io scheduler, such as
blk_mq_requeue_request().

We should call io sched's .requeue_request callback only for the 2nd
case.

Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Omar Sandoval <osandov@fb.com>
Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix IPA command submission race

[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ]

If multiple IPA commands are build & sent out concurrently,
fill_ipacmd_header() may assign a seqno value to a command that's
different from what send_control_data() later assigns to this command's
reply.
This is due to other commands passing through send_control_data(),
and incrementing card->seqno.ipa along the way.

So one IPA command has no reply that's waiting for its seqno, while some
other IPA command has multiple reply objects waiting for it.
Only one of those waiting replies wins, and the other(s) times out and
triggers a recovery via send_ipa_cmd().

Fix this by making sure that the same seqno value is assigned to
a command and its reply object.
Do so immediately before submitting the command & while holding the
irq_pending "lock", to produce nicely ascending seqnos.

As a side effect, *all* IPA commands now use a reply object that's
waiting for its actual seqno. Previously, early IPA commands that were
submitted while the card was still DOWN used the "catch-all" IDX seqno.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix IP address lookup for L3 devices

[ Upstream commit c5c48c58b259bb8f0482398370ee539d7a12df3e ]

Current code ("qeth_l3_ip_from_hash()") matches a queried address object
against objects in the IP table by IP address, Mask/Prefix Length and
MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually
require is either
a) "is this IP address registered" (ie. match by IP address only),
before adding a new address.
b) or "is this address object registered" (ie. match all relevant
attributes), before deleting an address.

Right now
1. the ADD path is too strict in its lookup, and eg. doesn't detect
conflicts between an existing NORMAL address and a new VIPA address
(because the NORMAL address will have mask != 0, while VIPA has
a mask == 0),
2. the DELETE path is not strict enough, and eg. allows del_rxip() to
delete a VIPA address as long as the IP address matches.

Fix all this by adding helpers (_addr_match_ip() and _addr_match_all())
that do the appropriate checking.

Note that the ADD path for NORMAL addresses is special, as qeth keeps
track of how many times such an address is in use (and there is no
immediate way of returning errors to the caller). So when a requested
NORMAL address _fully_ matches an existing one, it's not considered a
conflict and we merely increment the refcount.

Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "s390/qeth: fix using of ref counter for rxip addresses"

[ Upstream commit 4964c66fd49b2e2342da35358f2ff74614bcbaee ]

This reverts commit cb816192d986f7596009dedcf2201fe2e5bc2aa7.

The issue this attempted to fix never actually occurs.
l3_add_rxip() checks (via l3_ip_from_hash()) if the requested address
was previously added to the card. If so, it returns -EEXIST and doesn't
call l3_add_ip().
As a result, the "address exists" path in l3_add_ip() is never taken
for rxip addresses, and this patch had no effect.

Fixes: cb816192d986 ("s390/qeth: fix using of ref counter for rxip addresses")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix double-free on IP add/remove race

[ Upstream commit 14d066c3531a87f727968cacd85bd95c75f59843 ]

Registering an IPv4 address with the HW takes quite a while, so we
temporarily drop the ip_htable lock. Any concurrent add/remove of the
same IP adjusts the IP's use count, and (on remove) is then blocked by
addr->in_progress.
After the register call has completed, we check the use count for
concurrently attempted add/remove calls - and possibly straight-away
deregister the IP again. This happens via l3_delete_ip(), which
1) looks up the queried IP in the htable (getting a reference to the
*same* queried object),
2) deregisters the IP from the HW, and
3) frees the IP object.

The caller in l3_add_ip() then does a second free on the same object.

For this case, skip all the extra checks and lookups in l3_delete_ip()
and just deregister & free the IP object ourselves.

Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix IP removal on offline cards

[ Upstream commit 98d823ab1fbdcb13abc25b420f9bb71bade42056 ]

If the HW is not reachable, then none of the IPs in qeth's internal
table has been registered with the HW yet. So when deleting such an IP,
there's no need to stage it for deregistration - just drop it from
the table.

This fixes the "add-delete-add" scenario on an offline card, where the
the second "add" merely increments the IP's use count. But as the IP is
still set to DISP_ADDR_DELETE from the previous "delete" step,
l3_recover_ip() won't register it with the HW when the card goes online.

Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix overestimated count of buffer elements

[ Upstream commit 12472af89632beb1ed8dea29d4efe208ca05b06a ]

qeth_get_elements_for_range() doesn't know how to handle a 0-length
range (ie. start == end), and returns 1 when it should return 0.
Such ranges occur on TSO skbs, where the L2/L3/L4 headers (and thus all
of the skb's linear data) are skipped when mapping the skb into regular
buffer elements.

This overestimation may cause several performance-related issues:
1. sub-optimal IO buffer selection, where the next buffer gets selected
even though the skb would actually still fit into the current buffer.
2. forced linearization, if the element count for a non-linear skb
exceeds QETH_MAX_BUFFER_ELEMENTS.

Rather than modifying qeth_get_elements_for_range() and adding overhead
to every caller, fix up those callers that are in risk of passing a
0-length range.

Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix SETIP command handling

[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ]

send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.

Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix underestimated count of buffer elements

[ Upstream commit 89271c65edd599207dd982007900506283c90ae3 ]

For a memory range/skb where the last byte falls onto a page boundary
(ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the
calculation currently doesn't round up to the next PFN due to an
off-by-one error.
Thus qeth believes that the skb occupies one page less than it
actually does, and may select a IO buffer that doesn't have enough spare
buffer elements to fit all of the skb's data.
HW detects this as a malformed buffer descriptor, and raises an
exception which then triggers device recovery.

Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-net: disable NAPI only when enabled during XDP set

[ Upstream commit 4e09ff5362843dff3accfa84c805c7f3a99de9cd ]

We try to disable NAPI to prevent a single XDP TX queue being used by
multiple cpus. But we don't check if device is up (NAPI is enabled),
this could result stall because of infinite wait in
napi_disable(). Fixing this by checking device state through
netif_running() before.

Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tuntap: disable preemption during XDP processing

[ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ]

Except for tuntap, all other drivers' XDP was implemented at NAPI
poll() routine in a bh. This guarantees all XDP operation were done at
the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But
for tuntap, we do it in process context and we try to protect XDP
processing by RCU reader lock. This is insufficient since
CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which
breaks the assumption that all XDP were processed in the same CPU.

Fixing this by simply disabling preemption during XDP processing.

Fixes: 761876c857cb ("tap: XDP support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tuntap: correctly add the missing XDP flush

[ Upstream commit 1bb4f2e868a2891ab8bc668b8173d6ccb8c4ce6f ]

We don't flush batched XDP packets through xdp_do_flush_map(), this
will cause packets stall at TX queue. Consider we don't do XDP on NAPI
poll(), the only possible fix is to call xdp_do_flush_map()
immediately after xdp_do_redirect().

Note, this in fact won't try to batch packets through devmap, we could
address in the future.

Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Fixes: 761876c857cb ("tap: XDP support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: purge write queue upon RST

[ Upstream commit a27fd7a8ed3856faaf5a2ff1c8c5f00c0667aaa0 ]

When the connection is reset, there is no point in
keeping the packets on the write queue until the connection
is closed.

RFC 793 (page 70) and RFC 793-bis (page 64) both suggest
purging the write queue upon RST:
https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07

Moreover, this is essential for a correct MSG_ZEROCOPY
implementation, because userspace cannot call close(fd)
before receiving zerocopy signals even when the connection
is reset.

Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: put module reference if dump start fails

[ Upstream commit b87b6194be631c94785fe93398651e804ed43e28 ]

Before, if cb->start() failed, the module reference would never be put,
because cb->cb_running is intentionally false at this point. Users are
generally annoyed by this because they can no longer unload modules that
leak references. Also, it may be possible to tediously wrap a reference
counter back to zero, especially since module.c still uses atomic_inc
instead of refcount_inc.

This patch expands the error path to simply call module_put if
cb->start() fails.

Fixes: 41c87425a1ac ("netlink: do not set cb_running if dump's start() errs")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum_router: Do not unconditionally clear route offload indication

[ Upstream commit d1c95af366961101819f07e3c64d44f3be7f0367 ]

When mlxsw replaces (or deletes) a route it removes the offload
indication from the replaced route. This is problematic for IPv4 routes,
as the offload indication is stored in the fib_info which is usually
shared between multiple routes.

Instead of unconditionally clearing the offload indication, only clear
it if no other route is using the fib_info.

Fixes: 3984d1a89fe7 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cls_u32: fix use after free in u32_destroy_key()

[ Upstream commit d7cdee5ea8d28ae1b6922deb0c1badaa3aa0ef8c ]

Li Shuang reported an Oops with cls_u32 due to an use-after-free
in u32_destroy_key(). The use-after-free can be triggered with:

dev=lo
tc qdisc add dev $dev root handle 1: htb default 10
tc filter add dev $dev parent 1: prio 5 handle 1: protocol ip u32 divisor 256
tc filter add dev $dev protocol ip parent 1: prio 5 u32 ht 800:: match ip dst\
10.0.0.0/8 hashkey mask 0x0000ff00 at 16 link 1:
tc qdisc del dev $dev root

Which causes the following kasan splat:

==================================================================
BUG: KASAN: use-after-free in u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
Read of size 4 at addr ffff881b83dae618 by task kworker/u48:5/571

CPU: 17 PID: 571 Comm: kworker/u48:5 Not tainted 4.15.0+ #87
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
Workqueue: tc_filter_workqueue u32_delete_key_freepf_work [cls_u32]
Call Trace:
  dump_stack+0xd6/0x182
  ? dma_virt_map_sg+0x22e/0x22e
  print_address_description+0x73/0x290
  kasan_report+0x277/0x360
  ? u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
  u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
  u32_delete_key_freepf_work+0x1c/0x30 [cls_u32]
  process_one_work+0xae0/0x1c80
  ? sched_clock+0x5/0x10
  ? pwq_dec_nr_in_flight+0x3c0/0x3c0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? trace_hardirqs_on_caller+0x381/0x570
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1e5/0x760
  ? finish_task_switch+0x208/0x760
  ? preempt_notifier_dec+0x20/0x20
  ? __schedule+0x839/0x1ee0
  ? check_noncircular+0x20/0x20
  ? firmware_map_remove+0x73/0x73
  ? find_held_lock+0x39/0x1c0
  ? worker_thread+0x434/0x1820
  ? lock_contended+0xee0/0xee0
  ? lock_release+0x1100/0x1100
  ? init_rescuer.part.16+0x150/0x150
  ? retint_kernel+0x10/0x10
  worker_thread+0x216/0x1820
  ? process_one_work+0x1c80/0x1c80
  ? lock_acquire+0x1a5/0x540
  ? lock_downgrade+0x6b0/0x6b0
  ? sched_clock+0x5/0x10
  ? lock_release+0x1100/0x1100
  ? compat_start_thread+0x80/0x80
  ? do_raw_spin_trylock+0x190/0x190
  ? _raw_spin_unlock_irq+0x29/0x40
  ? trace_hardirqs_on_caller+0x381/0x570
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1e5/0x760
  ? finish_task_switch+0x208/0x760
  ? preempt_notifier_dec+0x20/0x20
  ? __schedule+0x839/0x1ee0
  ? kmem_cache_alloc_trace+0x143/0x320
  ? firmware_map_remove+0x73/0x73
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1c0
  ? schedule+0xf3/0x3b0
  ? lock_downgrade+0x6b0/0x6b0
  ? __schedule+0x1ee0/0x1ee0
  ? do_wait_intr_irq+0x340/0x340
  ? do_raw_spin_trylock+0x190/0x190
  ? _raw_spin_unlock_irqrestore+0x32/0x60
  ? process_one_work+0x1c80/0x1c80
  ? process_one_work+0x1c80/0x1c80
  kthread+0x312/0x3d0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x3a/0x50

Allocated by task 1688:
  kasan_kmalloc+0xa0/0xd0
  __kmalloc+0x162/0x380
  u32_change+0x1220/0x3c9e [cls_u32]
  tc_ctl_tfilter+0x1ba6/0x2f80
  rtnetlink_rcv_msg+0x4f0/0x9d0
  netlink_rcv_skb+0x124/0x320
  netlink_unicast+0x430/0x600
  netlink_sendmsg+0x8fa/0xd60
  sock_sendmsg+0xb1/0xe0
  ___sys_sendmsg+0x678/0x980
  __sys_sendmsg+0xc4/0x210
  do_syscall_64+0x232/0x7f0
  return_from_SYSCALL_64+0x0/0x75

Freed by task 112:
  kasan_slab_free+0x71/0xc0
  kfree+0x114/0x320
  rcu_process_callbacks+0xc3f/0x1600
  __do_softirq+0x2bf/0xc06

The buggy address belongs to the object at ffff881b83dae600
  which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 24 bytes inside of
  4096-byte region [ffff881b83dae600, ffff881b83daf600)
The buggy address belongs to the page:
page:ffffea006e0f6a00 count:1 mapcount:0 mapping:          (null) index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 0000000000000000 0000000000000000 0000000100070007
raw: dead000000000100 dead000000000200 ffff880187c0e600 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff881b83dae500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff881b83dae580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff881b83dae600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                             ^
  ffff881b83dae680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff881b83dae700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

The problem is that the htnode is freed before the linked knodes and the
latter will try to access the first at u32_destroy_key() time.
This change addresses the issue using the htnode refcnt to guarantee
the correct free order. While at it also add a RCU annotation,
to keep sparse happy.

v1 -> v2: use rtnl_derefence() instead of RCU read locks
v2 -> v3:
  - don't check refcnt in u32_destroy_hnode()
  - cleaned-up u32_destroy() implementation
  - cleaned-up code comment
v3 -> v4:
  - dropped unneeded comment

Reported-by: Li Shuang <shuali@redhat.com>
Fixes: c0d378ef1266 ("net_sched: use tcf_queue_work() in u32 filter")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

amd-xgbe: Restore PCI interrupt enablement setting on resume

[ Upstream commit cfd092f2db8b4b6727e1c03ef68a7842e1023573 ]

After resuming from suspend, the PCI device support must re-enable the
interrupt setting so that interrupts are actually delivered.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Verify inline header size do not exceed SKB linear size

[ Upstream commit f600c6088018d1dbc5777d18daa83660f7ea4a64 ]

Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control
segment of the WQE. It assumes that the linear part contains at least
MLX5E_MIN_INLINE bytes, which can be wrong.

Cited commit verified that driver will not copy more bytes into the
inline header part that the actual size of the packet. Re-factor this
check to make sure we do not exceed the linear part as well.

This fix is aligned with the current driver's assumption that the entire
L2 will be present in the linear part of the SKB.

Fixes: 6aace17e64f4 ("net/mlx5e: Fix inline header size for small packets")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: Fix VLAN reference count problem

[ Upstream commit 0e5a82efda872c2469c210957d7d4161ef8f4391 ]

When a VLAN is added on a port, a reference is taken on the
corresponding master VLAN entry. If it does not already exist, then it
is created and a reference taken.

However, in the second case a reference is not really taken when
CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by
refcount_inc_not_zero().

Fix this by using refcount_set() on a newly created master VLAN entry.

Fixes: 251277598596 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix dst refcnt leak in sctp_v6_get_dst()

[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ]

When going through the bind address list in sctp_v6_get_dst() and
the previously found address is better ('matchlen > bmatchlen'),
the code continues to the next iteration without releasing currently
held destination.

Fix it by releasing 'bdst' before continue to the next iteration, and
instead of introducing one more '!IS_ERR(bdst)' check for dst_release(),
move the already existed one right after ip6_dst_lookup_flow(), i.e. we
shouldn't proceed further if we get an error for the route lookup.

Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: Set addr_type in hash_keys for forwarded case

[ Upstream commit 1fe4b1184c2ae2bfbf9e8b14c9c0c1945c98f205 ]

The result of the skb flow dissect is copied from keys to hash_keys to
ensure only the intended data is hashed. The original L4 hash patch
overlooked setting the addr_type for this case; add it.

Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum_router: Fix error path in mlxsw_sp_vr_create

[ Upstream commit 0f2d2b2736b08dafa3bde31d048750fbc8df3a31 ]

Since mlxsw_sp_fib_create() and mlxsw_sp_mr_table_create()
use ERR_PTR macro to propagate int err through return of a pointer,
the return value is not NULL in case of failure. So if one
of the calls fails, one of vr->fib4, vr->fib6 or vr->mr4_table
is not NULL and mlxsw_sp_vr_is_used wrongly assumes
that vr is in use which leads to crash like following one:

[ 1293.949291] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c9
[ 1293.952729] IP: mlxsw_sp_mr_table_flush+0x15/0x70 [mlxsw_spectrum]

Fix this by using local variables to hold the pointers and set vr->*
only in case everything went fine.

Fixes: 76610ebbde18 ("mlxsw: spectrum_router: Refactor virtual router handling")
Fixes: a3d9bc506d64 ("mlxsw: spectrum_router: Extend virtual routers with IPv6 support")
Fixes: d42b0965b1d4 ("mlxsw: spectrum_router: Add multicast routes notification handling functionality")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>