rpi4: boot: Update the firmwares for kernel v4.19.81

Update the firmwares with the latest version from the vendor git repo.

The commit base is "b79618b5db4 kernel: Bump to 4.19.81"

Change-Id: Ica3af05ac507e3834a013d135149542723218cba
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

packaging: Change the kernel version of the spec file

This patch changes the kernel version of the spec file to 4.19.81.

Change-Id: Ic7789806d6418ba0cf66e3e93bc48eeb39289a7b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

arm: dts: bcm2711-rpi-4-b: Adds buttons for speaker profile

Tizen Speaker Profile uses a keypad that consists of 5 buttons for
up/down/left/right/center. The buttons are connected to GPIO pins as
follows.

GPIO16 : KEY_VOLUMEUP
GPIO13 : KEY_VOLUMEDOWN
GPIO6 : KEY_FASTFORWARD
GPIO12 : KEY_REWIND
GPIO25 : KEY_PLAYPAUSE

Change-Id: Iadaa10478c32517ae09c1c10f1d29d0f2518bfb5
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

arm: dts: bcm2711-rpi-4-b: Adds respeaker 4mic nodes

adds respeaker 4mic nodes.

Change-Id: Ibf8ad7f7f8afbaf3cd9f994eb21f0d8a5a9033c2
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

ARM: dts: bcm2711-rpi-4-b: Enable dt nodes for audio, i2c1, spi0

audio, i2c1, spi0 nodes should be enabled as RPI3.

Change-Id: I8ea244b188ac8d1787c1340369f7aa90486f44d6
Reference: 5cf4f3e4 ("ARM: dts: bcm2710-rpi-3-b-plus: Enable dt nodes for audio, i2c1, spi0")
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

rpi4: boot: Fix hdmi group to DMT

There is a problem using the hdmi small monitors causes monitor to
freeze. So defines the HDMI output group DMT, set defualt mode 720p.

Change-Id: I070549ed36423755b7e8742b923f2ac18b8ccc5b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

scripts: mkbootimg_rpi4.sh: Fix to install modules on non sudo

On sudo status, env variable is possible not to be preserved and
it causes failure on modules_install. So fix to install modules on
non sudo status and then move the directories and files to image
area.

[From repo of tizen rpi3: 89dcbe9b298c scripts: mkbootimg_rpi3.sh: Fix to install modules on non sudo status]
Change-Id: Ie7047c23762b668a08abf387dd76cf9cc8571937
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

rpi4: boot: Add to support mipi-csi camera module

Add to support mipi-csi camera module with the options, start_x=1
and disable_camera_led=1, in config.txt.

Change-Id: I450c291599031437a9fe58cac94a0d18c6cf58a9
Reference: https://www.raspberrypi.org/documentation/configuration/config-txt/boot.md
Reference: https://www.raspberrypi.org/documentation/configuration/config-txt/camera.md
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

scripts: mkbootimg_rpi4.sh: Remove rename for kernel7l.img.

Use origin kernel image name(zImage) because of specified kernel in
the config.txt file.

Change-Id: If4a255fb3b89a892a1e7305b6ae6a33829730ae5
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rpi4: boot: add kernel name in config.txt

Add kernel name in config.txt.

Change-Id: Iff5b38da853a54296c2eef7b6d5eaf24761b22cf
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

usb: dwc_otg: Fix invalid pointer casting

Fix build warning about pointer cast.

Change-Id: I29b84d07152f9c1745685e156a53275b1e15b6eb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

scripts: Remove the scripts for RPI3

Remove any RPI3 scripts, we don't need now.

Change-Id: I2b5f365fa363edd43abf35a740373ebdf03bf5ab
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rpi3: Remove the boot firmwares for RPI3

They also do not currently need to be kept in this repo. When the
linux-rpi3 repo is deprecated, it needs to be redefined.

Change-Id: I2025d32f7762ddf29860a8597cbc12dfae1d5019
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

packaging: remove linux-rpi3 spec file

It doesn't need to keep rpi3 spec.
If linux-rpi3 git is deprecated, it will be added at that time.
- To prevent confusion when packaging is generating.

Change-Id: Ifc87a8f4f022889a70366feb09d0e9bf37340222
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

packaging: remove unnecessary requirement

Remove unnecessary requirement instead of comment.

Change-Id: I891326a384fffd192d3cac4435116c82c95bc1e3
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

rpi4: Remove unused files

Remove unused files in rpi4.

Change-Id: I29525779cf28c33e68da9ac22abd895b2711be8c
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

scripts: Add mkbootimg_rpi4.sh

This script is to make boot.img and modules.img for rpi4.

Change-Id: I1a57e86070b631ba032e9cd35282f192adc6f379
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rpi4: Add cmdline.txt file

The cmdline.txt file is need for boot.

Change-Id: I2a6030c2beb5dae0f8607e9e22065aaa7bf5c81d
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

packaging: Add spec file for rpi4

This adds linux-rpi4.spec file for armv7l rpm packaging.

Change-Id: Ic9aef54edc5f1c718ba2c301e70a4d9ee79af35d
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2711_defconfig: Fix modules cleanup

Always used modules changed to built-in, also remove unused modules.

Change-Id: I9304cf746e5a7559659f11dd875e7c4eb2d54175
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2711_defconfig: Fix I2C config to built-in

Fix i2c configuration to built-in.

Change-Id: I91870db7c34635e623b8ae1a1c102c55f746d180
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2711_defconfig: Fix drm-vc4 to built-in

Fix drm-vc4 configuration to built-in and dependent configuration to
built-in.

Change-Id: I36ee27e9c42a9baccba4b6e022a78acbbe5ba025
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

tools: Add build script for ARM kernel of rpi4

Add build script for ARM kernel of rpi4.

Change-Id: I96cf3d55235a0a67d610bf87aa9ddf4f5e972411
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2711_defconfig: Disable bcm2708_fb

This driver is not used at tizen.

Change-Id: Ia524fc59c17ec11578a4366d173879fb40e0ab49
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2711_defconfig: Enable SMACK

It needs to enable configs related with SMACK for booting tizen
platform.

Change-Id: Ia304c703afc55d13dd2a8a7d14ad8de2c208c22b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2711_defconfig: Remove unused module

This module is unused.

Change-Id: Ie3524be3337a590bfe53fa93830067318150ef56
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: defconfig: Add tizen_bcm2711_defconfig

tizen_bcm2711_defconfig is from bcm2711_defconfig.

Change-Id: I21d1d2c7e46e8ea4cfb34b5a4465a1c4eb62967b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rpi4: config: Enable serial

Add configration to enable serial in config.txt file.

Change-Id: Ibe5971e1f068a8ef13ec7bb4e16aa9cfe1ab5feb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rpi4: Add config.txt extracted from raspbian full binary

The config.txt file is needed at boot time. And this file from binary
(https://downloads.raspberrypi.org/raspbian_full)

Change-Id: I841b11a4b400e5b44a5ca75f2f14819a35997e5e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rpi4: Add boot files from github

We can get boot binaries that are necessary for booting from master
branch of https://github.com/raspberrypi/firmware.

The git base is the commit "66bafab0055 kernel: Bump to 4.19.65"

Change-Id: Iba608e75426efcc1e45240ca532ec91807b4ce16
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rpi3: boot: Update the firmwares for kernel v4.19.65

Update the firmwares with the latest version from the vendor git repo.

The commit base is "66bafab0055 kernel: Bump to 4.19.65"

Change-Id: I3265ba8630f4bdb8a5cf4151c2662a6e12c51084
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

packaging: Change the kernel version of the spec file

This patch changes the kernel version of the spec file to 4.19.65.

Change-Id: I9b5c18180d19ba68c150342dc8772e3cf12856ec
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: configs: tizen_bcm2709_defconfig: Enable NETFILTER_XT_MATCH_LIMIT

From Tizen network security, NETFILTER_XT_MATCH_LIMIT is used for
ipv6. So enable NETFILTER_XT_MATCH_LIMIT config option.

Change-Id: Ife75ee0a766c64fb38a0e261f41a45678ab49bd4
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM64: configs: tizen_bcmrpi3_defconfig: Enable NETFILTER_XT_MATCH_LIMIT

From Tizen network security, NETFILTER_XT_MATCH_LIMIT is used for
ipv6. So enable NETFILTER_XT_MATCH_LIMIT config option.

Change-Id: Ieeba2c67481e299fb3d91ee4378f8b2a2baffc7b
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM: configs: tizen_bcm2709_defconfig: Enable NETFILTER_XT_MATCH_OWNER config

Enable the NETFILTER_XT_MATCH_OWNER config option to use xt_owner
supplementary groups.

Change-Id: I10a8277e2c42cae8cd02eb892e2dac5124681a71
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM64: configs: tizen_bcmrpi3_defconfig: Enable NETFILTER_XT_MATCH_OWNER config

Enable the NETFILTER_XT_MATCH_OWNER config option to use xt_owner
supplementary groups.

Change-Id: I1baf6d78dc7c28d7235bb1cce9b6132b2fba7148
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM: dts: bcm2710-rpi-3-b-plus: remove duplicated uart0_ctsrts_gpio30 node

The commit ad3b011329c8 ("ARM: dts: bcm2710-rpi-3-b-plus: Add cts
pin setting for bluetooth uart") introduced duplicated dt node,
uart0_ctsrts_gpio30, because it is already defined in bcm283x.dtsi.
Remove the duplicated dt node.

Change-Id: Ic9a39b88662198f30b585f48f2f0e896b62ab8f3
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM: dts: bcm2710-rpi-3-b-plus: Add cts pin setting for bluetooth uart

There is missing cts pin for uart0 used by bluetooth. Add the cts
pin setting as like bcm2837-rpi-3-b-plus.

Change-Id: Iefdf80ec0d523b85f7a6e579e1544a67b9139212
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

packaging: Add _wrong_version_format_terminate_build macro

Newer version of rpmbuild rejects double dash, "-", in version.
To support the style, add _worng_version_format_terminate_build
as 0.

Change-Id: Ieed243fb4ad7059b83d5328f0c38b15e4c74dc0e
Reference: https://github.com/rpm-software-management/rpm/commit/5e94633660d0e2b97
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

packaging: remove macro in package Name

Some build system cannot recognize macro in package Name. Remove
the macro by replacing with same string.

Change-Id: I34c853be82476db3b32d49aadc77809a2f493436
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

Bluetooth: fix wrong indent in __hci_req_update_{scan/adv}_rsp_data()

The commit ac160e08af69 ("Bluetooth: Add Advertising Packet
Configuration") introduces wrong indent which causes build warning for
gcc-7. Fix the wrong indent.

Change-Id: Ia0bde8a8f9660ccf8fa312e3c3ec6c8cb76863f1
Fixes: ac160e08af69 ("Bluetooth: Add Advertising Packet Configuration")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM64: configs: tizen_bcmrpi3_defconfig: Enable BCM Uart protocol

RPI3 target uses the BCM BT chip of the Uart type. To avoid the
reassembly failed problem, we should enable BCM Uart protocol
and need to use it. It is enabled with CONFIG_SERIAL_DEV_BUS.

Change-Id: I960ddb6f6b3cb64261ebcdc750771943697948ae
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM: configs: tizen_bcm2709_defconfig: Enable BCM Uart protocol

RPI3 target uses the BCM BT chip of the Uart type. To avoid the
reassembly failed problem, we should enable BCM Uart protocol
and need to use it. It is enabled with CONFIG_SERIAL_DEV_BUS.

Change-Id: I3cf97b032e1ce92898f2329fae3691d4d5870726
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
[sw0312.kim: adjust defconfig with savedefconfig and update commit-msg]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM: dts: bcm27xx: Fix to of_graph from bridge node for touchscreen

Beginning with kernel v4.15, the i2c management of the touchscreen
panel driver has been changed to use of_graph from brdge node. So
change to of_graph and remove the unnecessary nodes.

Change-Id: I6ef786ed472ef2b350eb8683568d0ecb407182c0
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/vc4: Fix change to find_panel in the dsi_attach func

There is a problem that crtc does not bind while continuously
requesting EPROBE_DEFER, if dsi_bind does not successfully bind.
We need to change the part of find_panel in bind to dsi_attach
function.

Change-Id: Ifce518f047f496079eb8fbe112dabbd9bc7488bb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: configs: tizen_bcm2709_defconfig: Remove unused modules

Remove unused modules from the backlight.

Change-Id: I1fd5267690efd4a7bd5137b64dfadba5111dc2dd
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

Bluetooth: Fix the potential crash issue

There is a logic error in the event function. We should
check the callback function's parameter before calling.

Change-Id: I06a4a8c50317e5ec4ae8fe35e4b788105e090196
Fixes: bde01c80dd51 ("Bluetooth: Set le data length command and event")
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>

tools: Add build script for ARM kernel of rpi3

Add build script for ARM kernel of rpi3.

Change-Id: I35a7dd2148350f775d3d96a478dac66190079d68
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

Bluetooth: Set le data length command and event

Sets the data length for the le data packet with in the
advised limits. MGMT command and event are added to handle
the setting of data length.

Change-Id: Ia5c2167743cc9a29190e5631973e9d52d41caa1d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Read host suggested default le data length

This patch adds MGMT command and code for supporting reading
default le data length value set at the controller.

Change-Id: I2b81982dc26ed5af4a8f8a3d3913db5d64625260
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Write host suggested default le data length

This patch adds MGMT command and code for supporting write
default le data length command to the controller.

Change-Id: I3d2c8b622b7913a3ed542342e3ba8076c30dc279
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Read LE Max data length command

This patch adds the MGMT command and code to support reading
the maximum data length supported command for LE.

Change-Id: I4dc0041f2070de2ccb6a4164c8823612863c941e
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Fix IPSP connection callback event issue.

This patch fixes the IPSP connection callback event issue
between kernel and bluez layer.

Change-Id: Ia4d625aa8a6dbc9da89a7d9f12308af9c90d0594
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: IPSP Connect/Disconnect apis

This patch adds MGMT code to support IPSP connect and
disconnect apis and handle connection state changed event.

Change-Id: I1c41ec4f38cf9a108e443def3bc23c1b964e2985
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add support to enable/disable IPSP

This patch supports MGMT commands and code to enable or disable
IPSP 6LowPan features.

Change-Id: Ia866ecfa517c7d7e4320f17d94d80dfeb9261e59
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Fix issue in the Set LE privacy function.

This patch fixes not to check the hdev power before setting
LE Privacy.

Change-Id: I344ea13b1d90527e3e7554ec616cdc640b85159c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Store the key if auth type is P192

This patch allows to store the key after authentication
if auth type is "HCI_LK_AUTH_COMBINATION_P192"

Change-Id: Ie44dbe7dfec361edab61aceaf9b2ca4057b88fa5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Cancel the Sniff timer

This patch adds code to cancel the sniff timer.

Change-Id: I756d3b08acf6462044d1fb204064fe12ce1238c1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Enable sniff mode for incoming connection

Add provision to set the link poilicy to enable sniff mode
for incoming connection.

Change-Id: Ifff9e9f0838f26a6c96d81f4cbaae43429aa231f
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Modify fast connectable type.

This patch modifies the fast connectable function
to just set the type.

Change-Id: I0cce96f85d823f9798ae7f147c4e33ce7b18e0e3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Send Authentication Request command on pairing failure

This patch allows to send HCI_OP_AUTH_REQUESTED command
to the remote device if pairing failure happens because
of pin or key missing error.

Change-Id: I9c28394dc06b22fd5fe9e58ac0b7d728c086bde4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Enable inquiry and page scan

This patch enables the inquiry and page scan after ACL
disconnection with one device and if there are no other
devices connected.

Change-Id: Ifb28be7d23f237d35112b2e0739ed55169baacf7
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Change authentication requirement.

This patch updates the authentication requirement to general
MITM if local and remote device IO capabilities are not
NO_INPUT_NO_OUTPUT.

Change-Id: Ie3955c3f8287418e74af20d40bdf30d0f1963e31
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Set link Supervision timeout for a connection

This patch allows to set the supervision timeout for a connection
if the device role is master.

Change-Id: I7897167ec07803f3059f2ab4d3314b0b7a951533
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Set filter policy for LE connection

This patch sets the filter policy to a default value 0x01 during
LE auto connection if the destination address is not set. And it
updates the destination address once the LE connection complete
event is recieved during LE auto connection. And for it checks
valid destination address before cancelling LE connection when
connection timeout occurs.

Change-Id: I9877556c0b0ab4826f5f4934ead4d85b7837036d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[squash patches, LE connection policy, set dest address and check dest address before cancelling connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Get Advertising TX power

This patch adds MGMT command to read the advertising TX power.

Change-Id: Ide9e5d332f034928d2eae2cbd68a025a0d42be1b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Set the link for SCO connection

This patch sets the link policy for SCO/eSCO connection.

Change-Id: I71caef5a3887f73a10329b6886c8cf52b80e8d37
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[add link policy setting in sco connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add MGMT command to set SCO settings

Added code to set sco settings.

Change-Id: I37aa572436241b06e00d1e9e75964aac747eeba5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[remove sco link policy part]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add multiple LE advertise state change event

This patch adds code for providing multiple LE advertisement state
changed event to upper layer.

Change-Id: I58fb8044e74402376ec30b121081edce7c8709d1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci_vendor_mutli_adv_state_change_evt and remove hci event structure from mgmt]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add LE device found MGMT event

This patch adds new MGMT event for LE device discovery and allows
the handling of all advertisement packets in platform.

Change-Id: I1927acb75eff0b60a5899898c6d7a000e1a108ef
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: fix vendor ext rssi link alert event

This patch fixes style for rssi link alert event from vendor
specific group ext.

Change-Id: I0e7003e417c5f5a590cce8264caccad515dd3c10
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add H/W TX timeout error MGMT event

This patch sends the H/W TX timeout error MGMT event if HCI command
timeout occurs after sending HCI commands.

Change-Id: I5eb593f2fe4d31c404dd94ef582790e47d03b10a
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add hardware error MGMT event

Add code to handle hardware error MGMT event.

Change-Id: I5875ea2aeae7aba95c1f8e15b456704dc6bcdee4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add LE vendor specific event handler

This patch adds the vendor specific LE meta event handler.
It handles the vendor specific handles like,
LE_MULTI_ADV_STATE_CHANGE_SUB_EVENT, LE_RSSI_LINK_ALERT.

Change-Id: I1f344a31e36f9c7442fe0bd8b598e67d9f5fb9bf
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci vendor speicif group event function]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add set LE scan parameter feature

Added new MGMT command to set LE scan parameters

Change-Id: I5ea660f97e93dfcc72273971ad0250e7f582f718
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Set Manufacturer data feature

Added new MGMT command to set the manufacturer data
in the BR/EDR packet.

Change-Id: Ie08062f4cad0c676deab94fd95fdc1a8c5602135
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add LE connection parameter update procedure

Added new MGMT command to update LE connection parameters

Change-Id: I6ae16513437cd42d40e75958aa8415baa1cbedbb
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add stop LE auto connection feature

Added new MGMT command to disable LE auto connection.

Change-Id: I1f5f61b83227501ad54019008b405fd47fd722a3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add BT LE discovery feature

This patch adds new MGMT commands to start LE discovery separately
and handles LE discovery state.

Change-Id: I85958b8c2b5c7e28f57c69e86037ab1e61a75db0
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Update device name on remote_name_event

This patch updates the device name on receiving the HCI event
remote_name_event during connection establishment.

Change-Id: I9a217e6760b1803a70af201a3f6903e722079749
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add RSSI Monitor feature

Added feature support for monitoring the RSSI value.
Commands and events for enabling, disabling and setting
rssi threshold values are added.

Change-Id: I850643a9228afc017e54217a11826b9c6a68a96b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Functions to modify WhiteList

This patch provides MGMT commands to manage the white
list which includes, adding, removing and clearing the
devices from white list.

Change-Id: If71107129d3a090ae81448a8122b76accd4f5522
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add Advertising Packet Configuration

This patch provides new MGMT commands to configure
the advertising data and scan response data packets for
LE peripheral devices.

Change-Id: I914d13795f4fb58e5f2e1cadb55086f4bcbc82df
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
[jhoon20.kim: adjust some codes to apply it in 5.4 kernel]
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

Bluetooth: Add MGMT tizen_handlers and TIZEN_OP_BASE_CODE.

Added the basic skeleton code for tizen_mgmt_handlers and
mgmt_tizen.h header file.

Change-Id: I8f3100aa79e6673840ba561f0a9c50238ca0880b
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

Bluetooth: Add "TIZEN_BT" flag

Added the tizen specific flag for use in adding tizen patches.

Change-Id: Ia391644fddbe600c8d845e0bf0808f587aa73e0c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>

packaging: change dependent openssl version to 1.1

OpenSSL 1.0.2 will be deprecated from tizen, so migration to newer
version is required. Change dependent openssl version to 1.1.

Change-Id: Icba12412b200cd1d5a8407dc4440b23d49bdde65
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

rpi3: boot: Update the boot firmwares with the latest version

Update the boot firmwares with the latest version from the vendor git
repo.

The commit base is e289f6a59ff2 ("kernel: Bump to 4.19.46").

Change-Id: If425a4d64a145a79ce505b13bb1a5a23495654fb
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

ARM: configs: tizen_bcm2709_defconfig: Sync with savedefconfig

Sync the tizen_bcm2709_defconfig with savedefconfig.

Change-Id: I8dbc7b6a42a43530de8818620816659387ecf11a
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

ARM64: configs: tizen_bcmrpi3_defconfig: Sync with savedefconfig

Sync the tizen_bcmrpi3_defconfig with savedefconfig.

Change-Id: I12389974ccade867052f68f1b839d85e7214981c
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

packaging: Change the kernel version of the spec file

This patch changes the kernel version of the spec file to 4.19.49.

Change-Id: Idc451fa46d64c0a968b4f146b8ff127245c3564e
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

ARM: tizen_bcm2709_defconfig: enable ZC3XX camera module

Currently, in test environment, usb camera 046d:08af is used and
it requires CONFIG_USB_GSPCA_ZC3XX. Enable ZC3XX camera module.

Change-Id: I2999e9b2288e0bd0bc74cab14a06bb785e8ea410
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM64: config: tizen_bcmrpi3: enable ZC3XX camera module

Currently, in test environment, usb camera 046d:08af is used and
it requires CONFIG_USB_GSPCA_ZC3XX. Enable ZC3XX camera module.

Change-Id: I840a774c718bc5ffd0898fd29140c3f52ed7757c
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

scripts: mkbootimg_rpi3.sh: Support 32bit boot image.

Support 32bit boot image, and add rule that check the bit between 32
and 64bit as '.config' file.

Change-Id: I247583233eb617c3f7f1695d8c5060d27934bcdd
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2709_defconfig: Disable unused modules and helper

Disable unused modules and helper related display.

Change-Id: I130a9d803384b338350eab9b6e7cbc42111de5b9
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ARM: tizen_bcm2709_defconfig: Disable FB_BCM2708

There is a crash between bcm2708_fb and drm_fb driver during kernel
booting, and logo image is broken. Disable CONFIG_FB_BCM2708 because
it uses the default fb and vc4-drm driver.

Change-Id: Ic5c533dbb884c5b2c3e87d9a131f3ce499d86279
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ASoC: ac108: Fixes kernel bug message when starting to capture

The code in the trigger function is moved to prepare function that is
called right before trigger function. clock operation would be ran by
parepare function without disabling preemption.

BUG: scheduling while atomic: arecord/1244/0x00000004
Preemption disabled at:
[<ffffff80087c4a08>] snd_pcm_stream_lock+0x30/0x68

Call trace:
[<ffffff800808b250>] dump_backtrace+0x0/0x270
[<ffffff800808b4e4>] show_stack+0x24/0x30
[<ffffff8008ae87c4>] dump_stack+0xac/0xe8
[<ffffff80080cc814>] __schedule_bug+0x7c/0xd8
[<ffffff8008afb558>] __schedule+0x718/0x880
[<ffffff8008afb6fc>] schedule+0x3c/0xa0
[<ffffff8008aff028>] schedule_timeout+0x190/0x408
[<ffffff8008afc4b8>] wait_for_common+0xa8/0x150
[<ffffff8008afc5c4>] wait_for_completion_timeout+0x2c/0x38
[<ffffff80086e5a0c>] bcm2835_i2c_xfer+0x16c/0x400
[<ffffff80086deedc>] __i2c_transfer+0x12c/0x570
[<ffffff80086df38c>] i2c_transfer+0x6c/0xc0
[<ffffff80086df430>] i2c_master_send+0x50/0x68
[<ffffff8008584454>] regmap_i2c_write+0x34/0x70
[<ffffff800857fe34>] _regmap_raw_write+0x7cc/0x7e0
[<ffffff800857feb8>] _regmap_bus_raw_write+0x70/0x88
[<ffffff800857ea48>] _regmap_write+0x70/0x160
[<ffffff800857ec10>] _regmap_update_bits+0xd8/0xf8
[<ffffff80085800b0>] regmap_update_bits_base+0x68/0x98
[<ffffff8008805838>] ac10x_update_bits+0x48/0x88
[<ffffff8008805c00>] ac108_trigger+0x118/0x130

Change-Id: I73ef21247e1dfbd0acd3272b6a73311377eb000d
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

rpi3: Update the boot firmwares with the latest version

This patch updates the boot firmwares with the latest version from the
vendor git repo.

The git base is the commit 3dde44c13f17 ("firmware: arm_loader: Further
conditionals for passing in a frame buffer").

Change-Id: Ia487afd7c2aa448f27e5f386be1b4584ee657144
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

packaging: Define necessary packages for building 4.19 kernel

This patch defines necessary packages for building 4.19 kernel including
bison, flex, and libopenssl-devel.

Change-Id: Iccd5bfdbd313599a9fb1dd86c0db264a1114bb41
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

packaging: Change the kernel version of the spec files

This patch changes the kernel version of the spec files to 4.19.40.

Change-Id: I85d3ae4fd90431431aedb5968a53f6c08ea6f3f9
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>

misc: tizen-inform-reboot: Use ksys_open() and ksys_close() wrappers

Using ksys_open() and ksys_close() wrappers allow us to avoid the
in-kernel calls to the sys_open() and sys_close() syscalls.

Change-Id: Iea33654daef917f88cede31675c66e8b5becad77
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>