Kyungmin Park [Thu, 30 Jul 2009 10:27:29 +0000 (19:27 +0900)]
s5pc110: universal: Fix wrong partition size (mtdparts)
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 10:06:01 +0000 (19:06 +0900)]
s5pc110: checksum: Support 8KiB and 16KiB
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 09:34:36 +0000 (18:34 +0900)]
OneNAND: Fix 128 OOB ecclayout typo
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 08:55:33 +0000 (17:55 +0900)]
s5pc110: universal: Increase IPL to 16KiB for support s5pc110
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 08:28:06 +0000 (17:28 +0900)]
s5pc110: universal: Fix compiler error cause by previous commit
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 07:37:49 +0000 (16:37 +0900)]
OneNAND: 4KiB Page support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 05:49:17 +0000 (14:49 +0900)]
Build: Display u-boot.bin & u-boot-onenand.bin size for kmpark
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 05:47:31 +0000 (14:47 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Kyungmin Park [Thu, 30 Jul 2009 05:37:40 +0000 (14:37 +0900)]
s5pc100: universal: Fix wrong chip select at mem setup
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 05:20:58 +0000 (14:20 +0900)]
s5pc110: universal: Add CONFIG_SYS_64BIT_VSPRINTF
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 04:51:36 +0000 (13:51 +0900)]
s5pc110: universal: support s5pc100 & s5pc110 simultaneously
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 30 Jul 2009 04:09:58 +0000 (13:09 +0900)]
s5pc110: universal: Fix wrong kernel size
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Wed, 29 Jul 2009 22:36:25 +0000 (00:36 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c
Kyungmin Park [Wed, 29 Jul 2009 08:30:18 +0000 (17:30 +0900)]
OneNAND IPL: Remove unused header file
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kumar Gala [Wed, 29 Jul 2009 02:49:52 +0000 (21:49 -0500)]
Update Freescale copyrights to remove "All Rights Reserved"
"All Rights Reserved" conflicts with the GPL.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Alessandro Rubini [Fri, 24 Jul 2009 09:27:14 +0000 (11:27 +0200)]
arm nomadik: add i2c
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Alessandro Rubini [Fri, 24 Jul 2009 09:27:03 +0000 (11:27 +0200)]
arm nomadik: add gpio support
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tom Rix [Sun, 28 Jun 2009 17:52:32 +0000 (12:52 -0500)]
OMAP3 Remove twl4030 defines
These defines have been subplanted by the equivelent defines in
include/twl4030.h
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tom Rix [Sun, 28 Jun 2009 17:52:31 +0000 (12:52 -0500)]
OMAP3 Move twl4030 mmc function
Because twl4030 now has its own device files, move and rename
twl4030_mmc_config.
twl4030_mmc_config initializes the twl4030 power setting to
the mmc device. Because it is in the twl4030 power domain, move
it out of drivers/mmc/omap3_mmc.c and into drivers/power/twl4030.c.
The function was renamed to twl4030_power_mmc_init because all
the functions in this file are to have the format
twl4030_power_<device>_<action>
In this case the suffix is mmc_init so
device : mmc
action : init
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tom Rix [Sun, 28 Jun 2009 17:52:30 +0000 (12:52 -0500)]
OMAP3 Move twl4030 power and led functions
Because twl4030 now has its own device files, move exiting
omap3 power_init_r to a new location.
power_init_r is the only function in board/omap3/common.
It initializes the twl4030 power for the board and enables
the led.
The power part of the the function is moved to twl4030_power_init in
drivers/power/twl4030.c The power compilation is conditional on the
existing config variable CONFIG_TWL4030_POWER.
The led part is moved to twl4030_led_init in the new file
drivers/misc/twl4030_led.c The led compilation is conditional on
the new config variable CONFIG_TWL4030_LED
The directory board/omap3/common was removed because power_init_r
was the only function in it.
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
Kyungmin Park [Wed, 29 Jul 2009 07:50:49 +0000 (16:50 +0900)]
s5pc110: universal: Add missing precharge command
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 29 Jul 2009 07:40:24 +0000 (16:40 +0900)]
OneNAND IPL: Remove debug code
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Wed, 29 Jul 2009 07:25:52 +0000 (09:25 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Wed, 29 Jul 2009 07:15:36 +0000 (09:15 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Kyungmin Park [Wed, 29 Jul 2009 07:08:28 +0000 (16:08 +0900)]
s5pc110: universal: Use same memory configuration as s5pc100
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 29 Jul 2009 05:29:44 +0000 (14:29 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
daeinki [Wed, 29 Jul 2009 05:40:46 +0000 (14:40 +0900)]
Merge branch 'master' of daeinki@10.89.8.158:/pub/git/u-boot-s5pc1xx
daeinki [Wed, 29 Jul 2009 05:40:10 +0000 (14:40 +0900)]
s5pc100: fb: Modified FB driver for s5pc100.
Signed-off-by: daeinki <inki.dae@samsung.com>
Kyungmin Park [Wed, 29 Jul 2009 05:29:41 +0000 (14:29 +0900)]
s5pc110: universal: DMC1 support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 29 Jul 2009 04:45:02 +0000 (13:45 +0900)]
s5pc110: universal: Add machine number and memory configuration
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 29 Jul 2009 02:37:54 +0000 (11:37 +0900)]
s5pc100: universal: Fix memory swap check
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 23:59:57 +0000 (08:59 +0900)]
s5pc110: usb: s5pc110 support
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 23:59:11 +0000 (08:59 +0900)]
s5pc110: usb: fix wrong register base address
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Wolfgang Denk [Tue, 28 Jul 2009 20:13:52 +0000 (22:13 +0200)]
TQM8xx* boards: set larger SMC Rx buffer len
Commit
2b3f12c2 added support for configurable SMC Rx buffer length on
8xx systems. Enable this feature on TQM8xx* based boards.
This fixes the problem that pasting text in the middle of a line
(i. e. inserting in edit mode) did not work - only the first two
characters got inserted, the rest was lost.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 28 Jul 2009 20:07:37 +0000 (22:07 +0200)]
Fix ext2load return code
Make the ext2load command return 0 on success (instead of the file
length).
Also fix output format (get rid of random newlines) and some coding
style issues (long lines etc.).
Signed-off-by: Wolfgang Denk <wd@denx.de>
Weirich, Bernhard [Wed, 10 Jun 2009 12:00:37 +0000 (14:00 +0200)]
ext2: fix inode size and calculations
Signed-off-by: unsik Kim <donari75@gmail.com>
Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Wolfgang Denk <wd@denx.de>
Kyungmin Park [Tue, 28 Jul 2009 11:29:38 +0000 (20:29 +0900)]
s5pc100: universal: Use internal RAM fully
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 10:50:36 +0000 (19:50 +0900)]
s5pc100: universal: Load u-boot exact address at OneNAND IPL
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 09:33:29 +0000 (18:33 +0900)]
OneNAND IPL: Fix wrong read interrupt offset
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 08:34:46 +0000 (17:34 +0900)]
OneNAND: ONENAND_DISABLE_READ_WHILE_LOAD support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 08:29:07 +0000 (17:29 +0900)]
s5pc110: universal: Set OneNAND base for s5pc110
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 08:28:42 +0000 (17:28 +0900)]
s5pc110: universal: Wrong operation at s5pc110
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 08:27:25 +0000 (17:27 +0900)]
s5pc110: OneNAND IPL support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 08:04:18 +0000 (17:04 +0900)]
OneNAND: Partial Read support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 06:58:33 +0000 (15:58 +0900)]
s5pc100: universal: Fix OneNAND clock initialization on s5pc110
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tom Rix [Sun, 28 Jun 2009 17:52:29 +0000 (12:52 -0500)]
TWL4030 Add power reset button
The Zoom2 power reset button is on the top right side of the
main board. Press and hold for about to 8 seconds to completely
reset the board.
Some of the beta boards have a hardware problem that prevents
using this feature. If is difficult to further characterize the
boards that fail. So disable resetting for all beta boards.
The Zoom1 reset button is the red circle on the top right,
front of the board. Press and hold the button for 8 seconds to
completely reset the board.
After analyzing beagle, it was determined that other boards
that use the twl4030 for power managment can also make use
this function.
The resetting is done by the power management part of the twl4030.
Since there is no existing drivers/power, add one.
The compilation of power/twl4030.h is controlled by the config
variable CONFIG_TWL4030_POWER
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tom Rix [Sun, 28 Jun 2009 17:52:28 +0000 (12:52 -0500)]
TWL4030 Add initial support
The TWL4030 supplies many peripherals for OMAP3 boards. These include
power management, usb and, keyboard.
The product description is found here:
http://focus.ti.com/docs/prod/folders/print/tps65950.html
Product reference document, tps65950.pdf, is found here:
http://www.ti.com/lit/gpn/tps65950
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tom Rix [Sun, 28 Jun 2009 17:52:27 +0000 (12:52 -0500)]
OMAP I2C Fix the sampling clock.
This problem is seen on Zoom1 and Zoom2 in the startup and
when i2c probe is used
Before :
In: serial
Out: serial
Err: serial
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_bb: I2C_STAT=1000
Die ID #
327c00020000000004013ddd05026013
Hit any key to stop autoboot: 0
OMAP3 Zoom1# i2c probe
Valid chip addresses:timed out in wait_for_bb: I2C_STAT=1000
02 03 04 05 06 07 08 09 0A 0B 0C 0D <snip>
After :
In: serial
Out: serial
Err: serial
Die ID #
327c00020000000004013ddd05026013
Hit any key to stop autoboot: 0
OMAP3 Zoom1# i2c probe
Valid chip addresses: 48 49 4A 4B
The addresses are for the twl4030.
The prescalar that converts the function clock to the sampling
clock is hardcoded to 0. The reference manual recommends 7
if the function clock is 96MHz.
Instead of just changing the hardcoded values, the prescalar
is calculated from the value I2C_IP_CLK.
The i2c #defines are in kHz. The speed passed into the
i2c init routine is in Hz. To be consistent, change the
defines to be in Hz.
The timing calculations are based on what is done in the
linux 2.6.30 kernel in drivers/i2c/buses/i2c_omap.c as
apposed to what is done in TRM.
The major variables in the timing caculations are
specified as #defines that can be overriden as required.
The variables and their defaults are
I2C_IP_CLK SYSTEM_CLOCK_96
I2C_INTERNAL_SAMPLING_CLK
19200000
I2C_FASTSPEED_SCLL_TRIM 6
I2C_FASTSPEED_SCLH_TRIM 6
I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
I2C_HIGHSPEED_PHASE_TWO_SCLH I2C_FASTSPEED_SCLH_TRIM
This was runtime verified on Zoom1, Zoom2, Beagle and Overo.
The 400kHz and 3.4M cases were verifed on test Zoom1,
Zoom2, Beagle and Overo configurations.
Testing for omap2 will be done in a second step as Nishanth
and Jean-Christophe commented.
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Mon, 20 Jul 2009 07:59:37 +0000 (09:59 +0200)]
arm, i2c: added support for the TWSI I2C Interface
Signed-off-by: Heiko Schocher <hs@denx.de>
Minkyu Kang [Tue, 28 Jul 2009 06:11:01 +0000 (15:11 +0900)]
s5pc1xx: usb: fix compile error
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 05:53:07 +0000 (14:53 +0900)]
s5pc100: universal: S5PC100_OTERHS has usb mask only
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 05:51:12 +0000 (14:51 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Tue, 28 Jul 2009 05:51:08 +0000 (14:51 +0900)]
s5pc110: universal: Fix OneNAND IPL boot (not yet finished)
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 05:45:52 +0000 (14:45 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Tue, 28 Jul 2009 05:45:06 +0000 (14:45 +0900)]
s5pc1xx: usb: use offset based I/O
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Stefan Roese [Mon, 27 Jul 2009 07:13:38 +0000 (09:13 +0200)]
ppc4xx: Fix problem with NOR range assignment in Canyonlands ft_board_setup
This patch fixes the problem, that the current fdt board fixup code only
set's one range, the one for NOR. By this it's overwriting the already
correctly configured values done in __ft_board_setup(). Just remove this
now unneeded NOR fixup and all the ranges are correctly defined.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Felix Radensky <felix@embedded-sol.com>
Stefan Roese [Mon, 27 Jul 2009 05:42:48 +0000 (07:42 +0200)]
ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
This patch adds some I2C bootstrap setting for NAND booting to the Kilauea
chip_config command ("533-nand" and "600-nand").
Additionally some incorrectly indented lines are fixed.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 27 Jul 2009 05:42:37 +0000 (07:42 +0200)]
ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx
targets. Otherwise the configured fixed init values for some DDR2
controller registers (e.g. RQDC) are not initialized at all resulting
in a non working SDRAM.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 27 Jul 2009 08:53:43 +0000 (10:53 +0200)]
ppc4xx: Fix Arches DDR2 initialization
Testing on AMCC Arches with the latest U-Boot version yielded that DDR2
initialization is currently broken. U-Boot hangs upon relocation to SDRAM
or crashes with random traps. This patch fixes this problem. Arches now
uses a different WRDTR and CLKTR default setting than Canyonlands/Glacier.
Signed-off-by: Stefan Roese <sr@denx.de>
Dirk Eibach [Mon, 27 Jul 2009 06:49:48 +0000 (08:49 +0200)]
ppc4xx: Add GDsys CompactCenter board support.
Board support for the Guntermann & Drunck CompactCenter and
DevCon-Center.
Based on the AMCC Canyonlands board support by Stefan Roese.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Kyungmin Park [Tue, 28 Jul 2009 05:18:13 +0000 (14:18 +0900)]
s5pc110: universal: Fix system clock init
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 04:58:27 +0000 (13:58 +0900)]
s5pc100: universal: only USB at s5pc100
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 28 Jul 2009 04:56:16 +0000 (13:56 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Tue, 28 Jul 2009 04:56:10 +0000 (13:56 +0900)]
s5pc110: Display more fancy
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 04:36:15 +0000 (13:36 +0900)]
s5pc1xx: clock: fix function name
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 04:29:43 +0000 (13:29 +0900)]
s5pc1xx: usb: change name s3c to s5p
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 04:28:50 +0000 (13:28 +0900)]
s5pc1xx: remove unused definitions
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 02:28:32 +0000 (11:28 +0900)]
s5pc1xx: uart: revert hard code
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 02:24:32 +0000 (11:24 +0900)]
s5pc110: fix clocks
set correct mask of MPLL, EPLL, VPLL
get HCLKs: Msys, Dsys, Psys
get PCLKs: Msys, Dsys, Psys
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Reinhard Arlt [Sat, 25 Jul 2009 04:19:12 +0000 (06:19 +0200)]
mpc83xx: Add esd VME8349 board support
This patch adds support for the esd VME8349 board equipped with the
MPC8349. It's a VME PMC carrier board equipped with the Tundra
TSI148 VME-bridge.
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Paul Gortmaker [Thu, 23 Jul 2009 21:10:55 +0000 (17:10 -0400)]
sbc8349: combine HRCW flash and u-boot image flash
Up to this point in time, the sbc8349 board was storing the u-boot
image in flash 2x. One for the HRCW value at the beginning of
flash (0xff80_0000), and once close to the end of flash (0xfff8_0000)
for the actual image that got executed.
This moves the TEXT_BASE to be the beginning of flash, which makes
the second copy of the image redundant, and frees up the flash
from the end of the environment storage to the end of the flash
device itself.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kyungmin Park [Mon, 27 Jul 2009 23:27:41 +0000 (08:27 +0900)]
s5pc110: I2C code cleanup
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 23:25:57 +0000 (08:25 +0900)]
s5pc110: I2C support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kim Phillips [Thu, 23 Jul 2009 19:09:38 +0000 (14:09 -0500)]
mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kyungmin Park [Mon, 27 Jul 2009 11:29:31 +0000 (20:29 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Mon, 27 Jul 2009 11:35:54 +0000 (20:35 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Mon, 27 Jul 2009 11:35:37 +0000 (20:35 +0900)]
s5pc1xx: set correct arm clock
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:29:26 +0000 (20:29 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Conflicts:
drivers/video/Makefile
include/lcd.h
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:09:08 +0000 (20:09 +0900)]
OneNAND: Reduce display message
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:05:10 +0000 (20:05 +0900)]
s5pc110: clock: Fix clock calculation
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:04:47 +0000 (20:04 +0900)]
s5pc100: OneNAND: LSI OneNAND code
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 10:42:42 +0000 (19:42 +0900)]
s5pc100: Fix compile error with clock base
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 10:40:42 +0000 (19:40 +0900)]
s5pc100: universal: Use r0 for clock base
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 09:03:39 +0000 (18:03 +0900)]
OneNAND: Fix oobdump and display force message
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Mon, 27 Jul 2009 08:37:37 +0000 (10:37 +0200)]
Prepare 2009.08-rc1 (again, after fixing last minute issues).
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 08:06:39 +0000 (10:06 +0200)]
cpu/arm920t/start.S: include <common.h> to have ROUND() defined
Commit
fcd3c87e made include/common.h usable by assembler code but
failed to update cpu/arm920t/start.S
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 08:01:11 +0000 (10:01 +0200)]
at91cap9adk: fix #ifdef/#endif pairing (2nd try)
Commit
7024aa14 was supposed to fix the #ifdef/#endif pairing in
include/configs/at91cap9adk.h, but did not cate all problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 07:58:14 +0000 (09:58 +0200)]
Fix include/common.h for boards with CONFIG_STATUS_LED
The reordering of include/common.h by commit
fcd3c87e495f3c48 broke
boards with status LED support, resulting in
error: #error Status LED configuration missing
errors. Undo this reordering to avoid this issue.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Minkyu Kang [Mon, 27 Jul 2009 07:23:08 +0000 (16:23 +0900)]
s5pc1xx: clock: avoid the possibility of overflow
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Wolfgang Denk [Mon, 27 Jul 2009 07:19:15 +0000 (09:19 +0200)]
ABI: fix build problems due to now needed div64 routine.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 06:50:59 +0000 (08:50 +0200)]
PMC405DE: fix out of tree building
Signed-off-by: Wolfgang Denk <wd@denx.de>
Minkyu Kang [Mon, 27 Jul 2009 05:41:51 +0000 (14:41 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Mon, 27 Jul 2009 05:41:12 +0000 (14:41 +0900)]
s5pc1xx: clock: s5pc110 support
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 05:32:39 +0000 (14:32 +0900)]
s5pc100: universal: Fix OneNAND IPL boot
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 04:43:29 +0000 (13:43 +0900)]
s5pc100: Use S5PC1XX for common prefix
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 04:39:18 +0000 (13:39 +0900)]
s5pc100: universal: Update Copyright
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 02:31:53 +0000 (11:31 +0900)]
s5pc110: universal: DMC support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 00:31:45 +0000 (09:31 +0900)]
s5pc110: timers: s5pc110 timer support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 00:31:23 +0000 (09:31 +0900)]
s5pc1xx: Add cpu_id default as s5pc100
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sun, 26 Jul 2009 23:49:11 +0000 (08:49 +0900)]
s5pc110: universal: Read correct H/W revision
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
projects / kernel / u-boot.git / log